Andreas Burkert
Research Subjects
Andreas Burkert has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Jürgen Mietz
Books a million
7 shared publications - Jens Lehmann
Books a million
5 shared publications - Gino Ebell
Bundesanstalt für Materialforschung und ‐prüfung (BAM) Unter den Eichen 87 12205 Berlin
4 shared publications J. Lehmann
BAM Federal Institute for Materials Research and Testing Division 6.1 Corrosion in Civil Engineering Unter den Eichen 87 12205 Berlin (Germany)
3 shared publications- Annette Burkert
Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 14129 Berlin
2 shared publications J. Mietz
BAM Federal Institute for Materials Research and Testing Division 6.1 Corrosion in Civil Engineering Unter den Eichen 87 12205 Berlin (Germany)
2 shared publications
Latest Publications
- 1 November 2020
- Published by Wiley in Bautechnik
- Vol. 97 (11) , 749-755
Risk of hydrogen evolution on martensitic screw anchors under practical construction conditions
- 1 November 2020
- Published by Wiley in Bautechnik
- Vol. 97 (11) , 749-755
Risk of hydrogen evolution on martensitic screw anchors under practical construction conditions
- 12 November 2019
- Published by Wiley in Bautechnik
- Vol. 97 (1) , 21-31
Untersuchungen zum korrosionsauslösenden Chloridgehalt an nicht rostendem ferritischem Betonstahl in Mörtel
Der maßgebliche Korrosionsschutz von nicht rostendem Stahl in Beton basiert, anders als bei unlegiertem Betonstahl, auf der Ausbildung einer Chromoxidschicht. Die Chromoxidschicht ist in alkalischem und in karbonatisiertem Beton beständig, sodass nicht rostende Stähle in einem passiven Zustand vorliegen. Die Initiierung von Lochkorrosionserscheinungen ist dagegen auch an nicht rostenden Stählen in Beton möglich. Der korrosionsauslösende Chloridgehalt ist neben dem Gehalt an Legierungselementen (insbesondere dem Chromgehalt) und der Oberflächenbeschaffenheit auch vom Konzentrationsverhältnis von OH– zu Cl– im Elektrolyten abhängig. Daher ist prinzipiell zu erwarten, dass in karbonatisierten Betonen geringere Chloridgehalte Korrosion initiieren können als in Betonen mit höheren pH‐Werten. Dies gilt in besonderem Maße für nicht rostende Betonstähle mit geringen Chromgehalten, wie z. B. Produkte aus dem Werkstoff 1.4003 (X2CrNi12) mit seiner im Vergleich zu den Standardausteniten geringen Beständigkeit. Um den kritischen korrosionsauslösenden Chloridgehalt am Beispiel eines am Markt verfügbaren ferritischen Chromstahls zu bestimmen, wurden an der Bundesanstalt für Materialforschung und ‐prüfung (BAM) umfangreiche Untersuchungen zu beschleunigten Korrosionsversuchen in alkalischen und karbonatisierten Mörteln durchgeführt. Mittels Laser‐induced Breakdown Spectroscopy (LIBS) konnten die korrosionsauslösenden Chloridgehalte im Phasengrenzbereich Betonstahl–Mörtel ermittelt werden.
- 12 November 2019
- Published by Wiley in Bautechnik
- Vol. 97 (1) , 21-31
Untersuchungen zum korrosionsauslösenden Chloridgehalt an nicht rostendem ferritischem Betonstahl in Mörtel
Der maßgebliche Korrosionsschutz von nicht rostendem Stahl in Beton basiert, anders als bei unlegiertem Betonstahl, auf der Ausbildung einer Chromoxidschicht. Die Chromoxidschicht ist in alkalischem und in karbonatisiertem Beton beständig, sodass nicht rostende Stähle in einem passiven Zustand vorliegen. Die Initiierung von Lochkorrosionserscheinungen ist dagegen auch an nicht rostenden Stählen in Beton möglich. Der korrosionsauslösende Chloridgehalt ist neben dem Gehalt an Legierungselementen (insbesondere dem Chromgehalt) und der Oberflächenbeschaffenheit auch vom Konzentrationsverhältnis von OH– zu Cl– im Elektrolyten abhängig. Daher ist prinzipiell zu erwarten, dass in karbonatisierten Betonen geringere Chloridgehalte Korrosion initiieren können als in Betonen mit höheren pH‐Werten. Dies gilt in besonderem Maße für nicht rostende Betonstähle mit geringen Chromgehalten, wie z. B. Produkte aus dem Werkstoff 1.4003 (X2CrNi12) mit seiner im Vergleich zu den Standardausteniten geringen Beständigkeit. Um den kritischen korrosionsauslösenden Chloridgehalt am Beispiel eines am Markt verfügbaren ferritischen Chromstahls zu bestimmen, wurden an der Bundesanstalt für Materialforschung und ‐prüfung (BAM) umfangreiche Untersuchungen zu beschleunigten Korrosionsversuchen in alkalischen und karbonatisierten Mörteln durchgeführt. Mittels Laser‐induced Breakdown Spectroscopy (LIBS) konnten die korrosionsauslösenden Chloridgehalte im Phasengrenzbereich Betonstahl–Mörtel ermittelt werden.
- 16 December 2016
- Published by Wiley in Bautechnik
- Vol. 94 (1) , 37-48
Langzeiterfahrungen an einer Gabionenkonstruktion
- 16 December 2016
- Published by Wiley in Bautechnik
- Vol. 94 (1) , 37-48
Langzeiterfahrungen an einer Gabionenkonstruktion
- 3 May 2013
- Published by Wiley in Materials and Corrosion
- Vol. 65 (11) , 1080-1095
Technical and economical stainless steel alternatives for civil engineering applications
Systematic laboratory and field exposure tests allow to compare nine different stainless steels (three ferritic, three austenitic, and three duplex grades) for civil engineering applications. The influence of surface finish was also taken into account by choosing five different industry‐specific features. The three duplex stainless steels revealed excellent corrosion resistance under most of the test conditions. Especially for applications in civil engineering the lean duplex steels offer distinct advantages. The manganese‐alloyed 1.4376 and the ferritic steel 1.4509 cannot be recommended as alternative materials as they did not perform satisfactorily.
- 3 May 2013
- Published by Wiley in Materials and Corrosion
- Vol. 65 (11) , 1080-1095
Technical and economical stainless steel alternatives for civil engineering applications
Systematic laboratory and field exposure tests allow to compare nine different stainless steels (three ferritic, three austenitic, and three duplex grades) for civil engineering applications. The influence of surface finish was also taken into account by choosing five different industry‐specific features. The three duplex stainless steels revealed excellent corrosion resistance under most of the test conditions. Especially for applications in civil engineering the lean duplex steels offer distinct advantages. The manganese‐alloyed 1.4376 and the ferritic steel 1.4509 cannot be recommended as alternative materials as they did not perform satisfactorily.
- 3 September 2012
- Published by Wiley in Structural Concrete
- Vol. 13 (3) , 145-155
Deterioration model and input parameters for reinforcement corrosion
The paper presents the damage model of German Research Unit 537 which was used as a working hypothesis for the development of a user‐friendly design model. Excerpts from the laboratory experiments and numerical calculations processed in project A of the research unit are presented here. The excerpts include the quantification of self‐corrosion, geometrical effects in the macrocell corrosion, development of corroding steel surface and pit depth as well as the quantification of the resistivity of the concrete and the corrosion of steel in cracked concrete.
- 3 September 2012
- Published by Wiley in Structural Concrete
- Vol. 13 (3) , 145-155
Deterioration model and input parameters for reinforcement corrosion
The paper presents the damage model of German Research Unit 537 which was used as a working hypothesis for the development of a user‐friendly design model. Excerpts from the laboratory experiments and numerical calculations processed in project A of the research unit are presented here. The excerpts include the quantification of self‐corrosion, geometrical effects in the macrocell corrosion, development of corroding steel surface and pit depth as well as the quantification of the resistivity of the concrete and the corrosion of steel in cracked concrete.
- 2 September 2011
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 106 (9) , 629-639
Korrosions‐ und Verbundverhalten verzinkter Betonstähle in Betonen mit chromatreduzierten Zementen
- 2 September 2011
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 106 (9) , 629-639
Korrosions‐ und Verbundverhalten verzinkter Betonstähle in Betonen mit chromatreduzierten Zementen
- 4 July 2011
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 106 (7) , 481-489
Die Aussagegenauigkeit der Potentialfeldmessung
- 4 July 2011
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 106 (7) , 481-489
Die Aussagegenauigkeit der Potentialfeldmessung
- 16 August 2010
- Published by Wiley in Materials and Corrosion
- Vol. 63 (3) , 264-270
Damage of stainless steel bars due to atmospheric corrosion
- 16 August 2010
- Published by Wiley in Materials and Corrosion
- Vol. 63 (3) , 264-270
Damage of stainless steel bars due to atmospheric corrosion