Masayuki Inaba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Masayuki Inaba has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Kei Okada
The University of Tokyo
54 shared publications - Kimitoshi Yamazaki
The Univ. of Tokyo
14 shared publications Mitsuharu Kojima
Graduate School of Information Science and Technology, University of Tokyo, 7-3-1, Hongo, Bukyo-ku, Tokyo 131-8656, Japan
10 shared publicationsYohei Kakiuchi
Department of Mechano-Informatics, The University of Tokyo
7 shared publications- Naotaka Hatao
The University of Tokyo
6 shared publications - Tetsunari Inamura
Tamagawa University
6 shared publications
Latest Publications
- Open Access
- 1 January 2018
- Published by Japan Society of Mechanical Engineers in Transactions of the JSME (in Japanese)
- Vol. 84 (864) , 18-00123
Development of active self-melting bolt and its application to self-healing structure
This paper illustrates the development of active self-melting bolt aiming at self-healing tendon-driven robot with high-load endurance. Recent pioneering research has explored several methods for applying self-healing principles for robotics. For example, exploiting reversible crosslinking bonds are a major approach. They enable conventional robots to gain selfrepairing capability from micro damages such as stubs and so on. However, providing a healing module with large load endurance and autonomous healing capability is yet a challenging task. Then, we categorized design challenges to construct such a module. In addition, we introduced some alternatives to overcome the problems. First, we formulated fracture and healing energy ratio to select proper material for active healing structure. The measure leads the authors to the statement that a low melting point alloy is a powerful alternative. Next, the authors insist that bolted joint structure is a candidate for self-healing module with high-load endurance. Finally, we validated the feasibility of the module with tensile tests using motor-driven tendon unit that has been developed by our group. The result showed that proposed structure had healing capability in spite of its low healing ratio. In summary, the paper presents design, manufacturing method and validation for active self-melting bolt.
- 1 January 2018
- Published by Japan Society of Mechanical Engineers in Transactions of the JSME (in Japanese)
- Vol. 84 (864) , 18-00123
Open AccessDevelopment of active self-melting bolt and its application to self-healing structure
This paper illustrates the development of active self-melting bolt aiming at self-healing tendon-driven robot with high-load endurance. Recent pioneering research has explored several methods for applying self-healing principles for robotics. For example, exploiting reversible crosslinking bonds are a major approach. They enable conventional robots to gain selfrepairing capability from micro damages such as stubs and so on. However, providing a healing module with large load endurance and autonomous healing capability is yet a challenging task. Then, we categorized design challenges to construct such a module. In addition, we introduced some alternatives to overcome the problems. First, we formulated fracture and healing energy ratio to select proper material for active healing structure. The measure leads the authors to the statement that a low melting point alloy is a powerful alternative. Next, the authors insist that bolted joint structure is a candidate for self-healing module with high-load endurance. Finally, we validated the feasibility of the module with tensile tests using motor-driven tendon unit that has been developed by our group. The result showed that proposed structure had healing capability in spite of its low healing ratio. In summary, the paper presents design, manufacturing method and validation for active self-melting bolt.
- 1 January 2018
- Published by Japan Society of Mechanical Engineers in Transactions of the JSME (in Japanese)
- Vol. 84 (864) , 18-00032
Speed governing behavior on parallel two-wheeled electric scooter by life-sized humanoid robot based on learning control with online tuning for PID gain during control
This paper proposes the online learning controller for PID gain tuning to regulate the speed of robot on parallel two-wheeled electric scooter. We define this speed regulation as “speed governing behavior”. The proposed system based on Iterative Feedback Tuning (IFT) contributes the online continuity during learning control not to interrupt and reset/restart the controller. PID gain update during control has the problem that the integral gain change affects the divergence of control input. To this problem, we propose the digital integrator which modifies the previous integrated value of control error. This proposed integrator solves the impulsive control input without any anti-windup or reference shaping. In conclusion, this paper shows the experimental results based on the online learning control and demonstrates the speed governing behavior by life-sized humanoid robot. We finally aim the driving of parallel two-wheeled electric scooter by speed control of humanoid robot.
- 1 January 2018
- Published by Japan Society of Mechanical Engineers in Transactions of the JSME (in Japanese)
- Vol. 84 (864) , 18-00032
Speed governing behavior on parallel two-wheeled electric scooter by life-sized humanoid robot based on learning control with online tuning for PID gain during control
This paper proposes the online learning controller for PID gain tuning to regulate the speed of robot on parallel two-wheeled electric scooter. We define this speed regulation as “speed governing behavior”. The proposed system based on Iterative Feedback Tuning (IFT) contributes the online continuity during learning control not to interrupt and reset/restart the controller. PID gain update during control has the problem that the integral gain change affects the divergence of control input. To this problem, we propose the digital integrator which modifies the previous integrated value of control error. This proposed integrator solves the impulsive control input without any anti-windup or reference shaping. In conclusion, this paper shows the experimental results based on the online learning control and demonstrates the speed governing behavior by life-sized humanoid robot. We finally aim the driving of parallel two-wheeled electric scooter by speed control of humanoid robot.
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 1A1-O07
Estimation of object-environment constraints for planning of humanoid motion on a movable object
This paper shows a method for achieving multi-contact humanoid Motion On a Movable Object (MOMO) such as climbing of a stepladder. MOMO has the following features: various constraints need to be considered and it has to handle scenarios where the mass properties of an object are unknown. In this paper, in order to achieve a humanoid robot having MOMO, we propose balance constraints including object-environment constraints and an online estimation of object's constraints. We evaluate our proposed method through experiments in which a life-sized humanoid robot climbs stepladders that have unknown mass properties.
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 1A1-O07
Estimation of object-environment constraints for planning of humanoid motion on a movable object
This paper shows a method for achieving multi-contact humanoid Motion On a Movable Object (MOMO) such as climbing of a stepladder. MOMO has the following features: various constraints need to be considered and it has to handle scenarios where the mass properties of an object are unknown. In this paper, in order to achieve a humanoid robot having MOMO, we propose balance constraints including object-environment constraints and an online estimation of object's constraints. We evaluate our proposed method through experiments in which a life-sized humanoid robot climbs stepladders that have unknown mass properties.
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P1-B07
Development of Suction Pinching Hand for Picking Task in Narrow Space
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P1-B07
Development of Suction Pinching Hand for Picking Task in Narrow Space
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P2-F08
Study of starting conversation system by observing a person’s curiosity to a robot
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P2-F08
Study of starting conversation system by observing a person’s curiosity to a robot
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P2-F07
Study of walking together system by following a person or holding hands
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P2-F07
Study of walking together system by following a person or holding hands
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P1-B08
Development of Five-fingered Hand with Soft Joints Using Machined Springs for Musculoskeletal Humanoid and Realization of Self-Weight Supporting Motion
Human can support their body not only in the foot but also by hand, so that they can dangle a bar and so on. But most humanoid robots support their body only in the foot and they use their hand just to manipulate objects because of the weakness of their hands. Strong hands enable humanoid robots to act in broader scene. Therefore, we developed the new life-size five-fingered hand that can support the body of life-size humanoid robot. It is tendon-driven and underactuated hand and actuators in forearms produce high gripping force. Because this hand has soft joints consisting of machined springs, it has both structural strength and impact resistance. We installed the hand to musculoskeletal humanoid “Kengoro” and achieved two self-weight supporting motions, push-up motion and dangling motion.
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2017, 2P1-B08
Development of Five-fingered Hand with Soft Joints Using Machined Springs for Musculoskeletal Humanoid and Realization of Self-Weight Supporting Motion
Human can support their body not only in the foot but also by hand, so that they can dangle a bar and so on. But most humanoid robots support their body only in the foot and they use their hand just to manipulate objects because of the weakness of their hands. Strong hands enable humanoid robots to act in broader scene. Therefore, we developed the new life-size five-fingered hand that can support the body of life-size humanoid robot. It is tendon-driven and underactuated hand and actuators in forearms produce high gripping force. Because this hand has soft joints consisting of machined springs, it has both structural strength and impact resistance. We installed the hand to musculoskeletal humanoid “Kengoro” and achieved two self-weight supporting motions, push-up motion and dangling motion.
- 1 January 2014
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2014, _1A1-C05_1
1A1-C05 Enhancement of Initial Acceleration with Pre-tension of Pneumatic Muscle Connected to Electrically Driven Tendon(Mechanism and Control for Wire Actuation System)
- 1 January 2014
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2014, _1A1-C05_1
1A1-C05 Enhancement of Initial Acceleration with Pre-tension of Pneumatic Muscle Connected to Electrically Driven Tendon(Mechanism and Control for Wire Actuation System)
- 1 January 2014
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2014, _3P1-F05_1
3P1-F05 Achievement of Adaptive Motion for Pedaling by Humanoid Applied The Flexible Elastic Characteristic of Tendon-Driven Ankle(Humanoid (2))
When we pedal a bicycle, it will be demanded that the passive leg which is inverse to the active pedaling leg is able to adapt to the outside dynamic surroundings generated by pedal. In this research, we focused on the adaptive motion control for pedaling by the musculoskeletal humanoid "Kenshiro" applied the flexible elastic characteristic of tendon-drive ankle and made the humanoid detect the external force generated by dynamic pedal motion and feedback the value of the force to update the position of ankle. Futhermore, we defined the flexible elastic characteristic as the compliance of muscle and introduced it to the humanoid ankle. As the result of the adaptive motion control and the contribution of the compliance of ankle muscle, we achieved to adjust the humanoid leg to the outside surroundings of cycling pedal.
- 1 January 2014
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2014, _3P1-F05_1
3P1-F05 Achievement of Adaptive Motion for Pedaling by Humanoid Applied The Flexible Elastic Characteristic of Tendon-Driven Ankle(Humanoid (2))
When we pedal a bicycle, it will be demanded that the passive leg which is inverse to the active pedaling leg is able to adapt to the outside dynamic surroundings generated by pedal. In this research, we focused on the adaptive motion control for pedaling by the musculoskeletal humanoid "Kenshiro" applied the flexible elastic characteristic of tendon-drive ankle and made the humanoid detect the external force generated by dynamic pedal motion and feedback the value of the force to update the position of ankle. Futhermore, we defined the flexible elastic characteristic as the compliance of muscle and introduced it to the humanoid ankle. As the result of the adaptive motion control and the contribution of the compliance of ankle muscle, we achieved to adjust the humanoid leg to the outside surroundings of cycling pedal.