W. Brezna
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
W. Brezna has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Jürgen Smoliner
Technische Universität Wien
6 shared publications - Gottfried Strasser
Institute of Solid State Electronics E362, Technische Universität Wien
5 shared publications - G. Fasching
Institut für Photonik, Technische Universität-Wien, 1040 Vienna, Austria
2 shared publications J. Smoliner
Institut für Festkörperelektronik TU-Wien Floragasse 7, A-1040 Wien, Austria
2 shared publications- Karl Unterrainer
Photonics Institute TU Wien Gußhausstraße 27-29 1040 Vienna Austria
2 shared publications - Alois Lugstein
Institute of Solid State Electronics, Technische Universität Wien, Gußhausstraße 25-25a, 1040 Vienna, Austria
1 shared publication
Latest Publications
- 1 February 2010
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 42 (4) , 1196-1199
Geometry effects and frequency dependence in scanning capacitance microscopy on GaAs Schottky and metal–oxide–semiconductor-Type junctions
- 1 February 2010
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 42 (4) , 1196-1199
Geometry effects and frequency dependence in scanning capacitance microscopy on GaAs Schottky and metal–oxide–semiconductor-Type junctions
- 16 November 2009
- Published by AIP Publishing in Applied Physics Letters
- Vol. 95 (20) , 201118
Spectrally resolved confocal microscopy for laser mode imaging and beam characteristic investigations
In this letter, confocal optical microscopy is used to investigate the intensity patterns of an infrared vertical cavity surface emitting laser in three dimensions with high spectral resolution. The measurements were performed between the near field (Fresnel) regime and the far field (Fraunhofer) regime. The calculated intensity patterns were found to be in good agreement with the measured intensity distribution. The calculations together with the measurements can be used to determine the phase relation between different positions inside the gain medium.
- 16 November 2009
- Published by AIP Publishing in Applied Physics Letters
- Vol. 95 (20) , 201118
Spectrally resolved confocal microscopy for laser mode imaging and beam characteristic investigations
In this letter, confocal optical microscopy is used to investigate the intensity patterns of an infrared vertical cavity surface emitting laser in three dimensions with high spectral resolution. The measurements were performed between the near field (Fresnel) regime and the far field (Fraunhofer) regime. The calculated intensity patterns were found to be in good agreement with the measured intensity distribution. The calculations together with the measurements can be used to determine the phase relation between different positions inside the gain medium.
- 16 April 2009
- Published by Wiley in physica status solidi (c)
- Vol. 6 (4) , 793-796
Atomic force microscopy based room temperature photocurrent-spectroscopy of single subsurface InAs quantum dots
- 16 April 2009
- Published by Wiley in physica status solidi (c)
- Vol. 6 (4) , 793-796
Atomic force microscopy based room temperature photocurrent-spectroscopy of single subsurface InAs quantum dots
- 10 October 2007
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 22 (11) , 1209-1212
Force- and bias-dependent contrast in atomic force microscopy based photocurrent imaging on GaAs–AlAs heterostructures
In this work, photocurrent images of lithographically processed GaAs/AlAs heterostructures are recorded by an atomic force microscope. It is found that the AFM tip sample contact is strongly dependent on the thickness of the native oxide layer on the sample surface. Therefore, the photocurrents increase if a successively increasing tip sample force is applied, which leads to a gradual penetration of the surface oxide layer. Due to the complex behavior of the photocurrent as a function of tip-bias and tip-force, the contrast in photocurrent images is non-monotonic and can be reversed under appropriate bias and force conditions.
- 10 October 2007
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 22 (11) , 1209-1212
Force- and bias-dependent contrast in atomic force microscopy based photocurrent imaging on GaAs–AlAs heterostructures
In this work, photocurrent images of lithographically processed GaAs/AlAs heterostructures are recorded by an atomic force microscope. It is found that the AFM tip sample contact is strongly dependent on the thickness of the native oxide layer on the sample surface. Therefore, the photocurrents increase if a successively increasing tip sample force is applied, which leads to a gradual penetration of the surface oxide layer. Due to the complex behavior of the photocurrent as a function of tip-bias and tip-force, the contrast in photocurrent images is non-monotonic and can be reversed under appropriate bias and force conditions.
- 1 June 2007
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 78 (6) , 063706
Two color, low intensity photocurrent feedback for local photocurrent spectroscopy
In this work, we introduce a two color, low intensity photocurrent feedback method for photocurrent spectroscopy utilizing an atomic force microscope (AFM). In most applications, measurements with weak optical excitations are not feasible with an AFM because the powerful AFM feedback laser severely disturbs the measurements. Therefore, we have developed a feedback system based on the pressure dependent Schottky barrier height at the tip-sample interface. The versatility of the new feedback system is demonstrated by recording high resolution photocurrent spectra on GaAs∕InAs heterostructures.
- 1 June 2007
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 78 (6) , 063706
Two color, low intensity photocurrent feedback for local photocurrent spectroscopy
In this work, we introduce a two color, low intensity photocurrent feedback method for photocurrent spectroscopy utilizing an atomic force microscope (AFM). In most applications, measurements with weak optical excitations are not feasible with an AFM because the powerful AFM feedback laser severely disturbs the measurements. Therefore, we have developed a feedback system based on the pressure dependent Schottky barrier height at the tip-sample interface. The versatility of the new feedback system is demonstrated by recording high resolution photocurrent spectra on GaAs∕InAs heterostructures.
- 22 July 2005
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 20 (9) , 903-907
Quantitative scanning capacitance spectroscopy on GaAs and InAs quantum dots
- 22 July 2005
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 20 (9) , 903-907
Quantitative scanning capacitance spectroscopy on GaAs and InAs quantum dots
- 4 May 2005
- Published by Wiley in physica status solidi (c)
- Vol. 2 (8) , 3114-3117
Photocurrent spectroscopy of single InAs/GaAs quantum dots
- 4 May 2005
- Published by Wiley in physica status solidi (c)
- Vol. 2 (8) , 3114-3117
Photocurrent spectroscopy of single InAs/GaAs quantum dots
- 10 February 2003
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 18 (4) , 195-198
Focussed ion beam induced damage in silicon studied by scanning capacitance microscopy
- 10 February 2003
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 18 (4) , 195-198
Focussed ion beam induced damage in silicon studied by scanning capacitance microscopy