R. B. Anand
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
R. B. Anand has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- J. Sadhik Basha
International Maritime College Oman, National University of Science and Technology, Oman
4 shared publications - H. S. Sunil Kumar
Department of Mechanical Engineering, D.A.C.G. (Govt.) Polytechnic, Chikmagalur 577101, India
1 shared publication J Sadhik Basha
Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli, Tamil Nadu, India
1 shared publication
Latest Publications
- 27 November 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2039 (1) , 020040
Parametric study on impact of delamination on flutter velocity of wind turbine blade structure
Classical aeroelastic flutter of wind turbine blades is a critical subject caused by the coalescence of flap wise and torsion modes due to which the structural and aerodynamic damping is insufficient to damp out the large vibratory motion produced. Although it is inconsequential for the current utility scale wind turbine blades, the crescent need for light weight and longer blades seems to enhance the significance by considering this phenomenon. This would mean that such aeroelastic instabilities would become a major design drivers. This study is performed to detect the occurrence of flutter instability and its dependency of delamination in a horizontal axis wind turbine (HAWT) blade In addition, the impact of the process parameters on the flutter performance and aeroelastic stability of the blade is investigated. A 100m HAWT blade with DU-97-W-300 aerofoil cross section is chosen for the analysis where an advanced ideal beam model is used as an idealised structure to represent its structure. The analysis is carried out with the help of standard FEA codes using PK-method for flutter solution and Double lattice method to calculate the aerodynamic loads and matrices, while the equations of motion are solved using by Galerkin approach. The output highlights the change in damping ratio due to isolation of skin regions due to glue failure and the change in the impact of delamination with respect to wind speed is also observed. The results reveal a decline in flutter velocity indicating, decrease in blade stability due to local failure in blade structure.
- 27 November 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2039 (1) , 020040
Parametric study on impact of delamination on flutter velocity of wind turbine blade structure
Classical aeroelastic flutter of wind turbine blades is a critical subject caused by the coalescence of flap wise and torsion modes due to which the structural and aerodynamic damping is insufficient to damp out the large vibratory motion produced. Although it is inconsequential for the current utility scale wind turbine blades, the crescent need for light weight and longer blades seems to enhance the significance by considering this phenomenon. This would mean that such aeroelastic instabilities would become a major design drivers. This study is performed to detect the occurrence of flutter instability and its dependency of delamination in a horizontal axis wind turbine (HAWT) blade In addition, the impact of the process parameters on the flutter performance and aeroelastic stability of the blade is investigated. A 100m HAWT blade with DU-97-W-300 aerofoil cross section is chosen for the analysis where an advanced ideal beam model is used as an idealised structure to represent its structure. The analysis is carried out with the help of standard FEA codes using PK-method for flutter solution and Double lattice method to calculate the aerodynamic loads and matrices, while the equations of motion are solved using by Galerkin approach. The output highlights the change in damping ratio due to isolation of skin regions due to glue failure and the change in the impact of delamination with respect to wind speed is also observed. The results reveal a decline in flutter velocity indicating, decrease in blade stability due to local failure in blade structure.
- 1 May 2013
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 35 (3) , 257-264
The influence of nano additive blended biodiesel fuels on the working characteristics of a diesel engine
- 1 May 2013
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 35 (3) , 257-264
The influence of nano additive blended biodiesel fuels on the working characteristics of a diesel engine
- 1 May 2011
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 225 (3) , 279-288
An experimental investigation in a diesel engine using carbon nanotubes blended water–diesel emulsion fuel
An experimental investigation is carried out to establish the performance, emission, and combustion characteristics of a diesel engine using carbon nanotubes (CNT) blended water–diesel emulsion fuels. The investigation is carried out in three phases using an experimental set-up consisting of a single-cylinder diesel engine coupled with an electrical loading device, an AVL Di-gas analyser, an AVL smoke meter, and a data-acquisition system comprising a Kistler piezoelectric pressure transducer and a crank angle encoder: using neat diesel in the first phase, water–diesel emulsion fuel in the second phase, and CNT blended water–diesel emulsion fuels in the third phase. The water–diesel emulsion fuel is prepared in the proportion of 5 per cent water, 93 per cent diesel, and 2 per cent surfactants (Span 80 and Tween 80) by volume with a hydrophilic–lipophilic balance of 8. The CNT are blended with the water–diesel emulsion fuel in the mass fractions of 25 and 50 ppm with the aid of a mechanical homogenizer and an ultrasonicator. Subsequently, the stability characteristics of CNT blended water–diesel emulsion fuels are analysed under static conditions. All the experiments are conducted at a constant speed of 1500 r/min and the results revealed a considerable enhancement in the brake thermal efficiency and substantial reduction in the harmful pollutants due to the incorporation of CNT in the water–diesel emulsion fuel.
- 1 May 2011
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 225 (3) , 279-288
An experimental investigation in a diesel engine using carbon nanotubes blended water–diesel emulsion fuel
An experimental investigation is carried out to establish the performance, emission, and combustion characteristics of a diesel engine using carbon nanotubes (CNT) blended water–diesel emulsion fuels. The investigation is carried out in three phases using an experimental set-up consisting of a single-cylinder diesel engine coupled with an electrical loading device, an AVL Di-gas analyser, an AVL smoke meter, and a data-acquisition system comprising a Kistler piezoelectric pressure transducer and a crank angle encoder: using neat diesel in the first phase, water–diesel emulsion fuel in the second phase, and CNT blended water–diesel emulsion fuels in the third phase. The water–diesel emulsion fuel is prepared in the proportion of 5 per cent water, 93 per cent diesel, and 2 per cent surfactants (Span 80 and Tween 80) by volume with a hydrophilic–lipophilic balance of 8. The CNT are blended with the water–diesel emulsion fuel in the mass fractions of 25 and 50 ppm with the aid of a mechanical homogenizer and an ultrasonicator. Subsequently, the stability characteristics of CNT blended water–diesel emulsion fuels are analysed under static conditions. All the experiments are conducted at a constant speed of 1500 r/min and the results revealed a considerable enhancement in the brake thermal efficiency and substantial reduction in the harmful pollutants due to the incorporation of CNT in the water–diesel emulsion fuel.
- 25 April 2011
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 8 (3) , 332-348
An Experimental Study in a CI Engine Using Nanoadditive Blended Water–Diesel Emulsion Fuel
In this present work, the investigations are carried out to study the performance, emission, and combustion characteristics of a single cylinder Compression Ignition (CI) engine using water–diesel emulsion fuel, and the alumina nanoparticles blended water–diesel emulsion fuels. The water–diesel emulsion fuel is prepared by the emulsification method in the proportion of 83% diesel, 15% water, and 2% surfactants by volume. The alumina nanoparticles are blended with the water–diesel emulsion fuel in the mass fractions of 25, 50, and 100 ppm systematically. The experiments are conducted at a constant speed of 1500 rpm and the results revealed a substantial enhancement in the performance and reduction in the harmful pollutants due to the incorporation of alumina nanoparticles in the water–diesel emulsion fuel. Furthermore, the hot-plate evaporation characteristics test asserted a considerable reduction in the evaporation time by adding the potential alumina nanoparticles to the water–diesel emulsion fuel.
- 25 April 2011
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 8 (3) , 332-348
An Experimental Study in a CI Engine Using Nanoadditive Blended Water–Diesel Emulsion Fuel
In this present work, the investigations are carried out to study the performance, emission, and combustion characteristics of a single cylinder Compression Ignition (CI) engine using water–diesel emulsion fuel, and the alumina nanoparticles blended water–diesel emulsion fuels. The water–diesel emulsion fuel is prepared by the emulsification method in the proportion of 83% diesel, 15% water, and 2% surfactants by volume. The alumina nanoparticles are blended with the water–diesel emulsion fuel in the mass fractions of 25, 50, and 100 ppm systematically. The experiments are conducted at a constant speed of 1500 rpm and the results revealed a substantial enhancement in the performance and reduction in the harmful pollutants due to the incorporation of alumina nanoparticles in the water–diesel emulsion fuel. Furthermore, the hot-plate evaporation characteristics test asserted a considerable reduction in the evaporation time by adding the potential alumina nanoparticles to the water–diesel emulsion fuel.
- 1 March 2011
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 3 (2) , 023106
Role of nanoadditive blended biodiesel emulsion fuel on the working characteristics of a diesel engine
Biodiesel emulsions are considered as the propitious alternative fuels for diesel engines. The need of biodiesel emulsion fuels for the diesel engines is to curtail the dependency on the fossil fuels in context to the world energy oil crisis. Henceforth, the present study provides a tangible pathway to prepare and to ameliorate the biodiesel emulsion fuel on incorporating potential alumina nanoparticles. The biodiesel emulsion fuel is prepared by emulsification technique comprising of 83% of jatropha biodiesel, 15% of water, and 2% of surfactants (Span80 and Tween80) with the aid of a mechanical agitator. The prepared biodiesel emulsion fuel is mixed with the alumina nanoparticles in the mass fractions of say 25, 50, and 100 ppm with the help of an ultrasonicator. The whole investigation is carried out in a constant speed diesel engine in three phases using jatropha biodiesel, jatropha biodiesel emulsion fuel, and alumina nanoparticle blended jatropha biodiesel emulsion fuels. The experimental results revealed a substantial enhancement in the performance and a reduction in harmful emissions for the biodiesel emulsion fuels compared to those of neat biodiesel. In addition, the incorporation of nanoparticles in the biodiesel emulsion fuel has also revealed an incremental better performance and reduced emissions than that of biodiesel emulsion fuel and biodiesel. Furthermore, the significance of shorten ignition delay effect associated with the nanoparticle blended biodiesel emulsion fuels has been investigated and asserted upon conducting a hot-plate evaporation study.
- 1 March 2011
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 3 (2) , 023106
Role of nanoadditive blended biodiesel emulsion fuel on the working characteristics of a diesel engine
Biodiesel emulsions are considered as the propitious alternative fuels for diesel engines. The need of biodiesel emulsion fuels for the diesel engines is to curtail the dependency on the fossil fuels in context to the world energy oil crisis. Henceforth, the present study provides a tangible pathway to prepare and to ameliorate the biodiesel emulsion fuel on incorporating potential alumina nanoparticles. The biodiesel emulsion fuel is prepared by emulsification technique comprising of 83% of jatropha biodiesel, 15% of water, and 2% of surfactants (Span80 and Tween80) with the aid of a mechanical agitator. The prepared biodiesel emulsion fuel is mixed with the alumina nanoparticles in the mass fractions of say 25, 50, and 100 ppm with the help of an ultrasonicator. The whole investigation is carried out in a constant speed diesel engine in three phases using jatropha biodiesel, jatropha biodiesel emulsion fuel, and alumina nanoparticle blended jatropha biodiesel emulsion fuels. The experimental results revealed a substantial enhancement in the performance and a reduction in harmful emissions for the biodiesel emulsion fuels compared to those of neat biodiesel. In addition, the incorporation of nanoparticles in the biodiesel emulsion fuel has also revealed an incremental better performance and reduced emissions than that of biodiesel emulsion fuel and biodiesel. Furthermore, the significance of shorten ignition delay effect associated with the nanoparticle blended biodiesel emulsion fuels has been investigated and asserted upon conducting a hot-plate evaporation study.