Ivan Šmit
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ivan Šmit has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Anđela Pustak
Radiation Chemistry and Dosimetry Laboratory, Ruđer Bošković Institute, Bijenička Cesta 54, 10 000 Zagreb, Croatia
5 shared publications Iztok Švab
ISOKON, Production and Processing of Thermoplastics, Ltd, Mestni trg 5a, 3210 Slovenske Konjice, Slovenia
5 shared publicationsVojko Musil
University of Maribor, FEB Maribor, Institute of Technology, Razlagova 14, 2000 Maribor, Slovenia
4 shared publications- Vojko Musil
FEB Maribor, Institute of Technology, University of Maribor, Maribor, Slovenia
3 shared publications - Iztok Švab
ISOKON d.o.o., Industrijska cesta 16, SI-3210 Slovenske Konjice, Slovenia
2 shared publications - Matjaž Denac
FEB Maribor, Institute of Technology, University of Maribor, Maribor, Slovenia
2 shared publications
Latest Publications
- 27 July 2016
- Published by Springer Nature in Journal of Polymer Research
- Vol. 23 (8) , 1-13
Mechanical and rheological properties of silica-reinforced polypropylene/m-EPR blends
- 27 July 2016
- Published by Springer Nature in Journal of Polymer Research
- Vol. 23 (8) , 1-13
Mechanical and rheological properties of silica-reinforced polypropylene/m-EPR blends
- 30 January 2016
- Published by Springer Nature in Journal of Polymer Research
- Vol. 23 (2) , 1-12
Structure and morphology of silica-reinforced polypropylene composites modified with m-EPR copolymers
- 30 January 2016
- Published by Springer Nature in Journal of Polymer Research
- Vol. 23 (2) , 1-12
Structure and morphology of silica-reinforced polypropylene composites modified with m-EPR copolymers
- 17 September 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 128 (5) , 3099-3106
Morphology of polypropylene/silica nano‐ and microcomposites
The aim of this study was to compare the effects of different silica grades on the structure and morphology of isotactic polypropylene (iPP)/silica composites to better understand their structure–property relationships. Isotactic polypropylene composites with 2, 4, 6, 8 vol % of added silica fillers differing in particle size (micro‐ vs. nanosilica) and surface modification (untreated vs. treated surface) were prepared by nonisothermal compression molding and characterized by different methods. The addition of all silica fillers grades to the iPP matrix significantly influenced the spherulitic morphology, while phase characteristics of the iPP matrix seemed to be unaffected. Surface modification of silica fillers exhibited stronger effects on spherulite size than size of silica particles. Nonpolar silica particles, more miscible or compatible with iPP chains than polar silica particles, enabled better spherulitic growth. The spherulite sizes tended to reach equal values at 8 vol % of added silicas showing that spherulite size became independent of filler concentration and surface modification above optimum filler concentration. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- 17 September 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 128 (5) , 3099-3106
Morphology of polypropylene/silica nano‐ and microcomposites
The aim of this study was to compare the effects of different silica grades on the structure and morphology of isotactic polypropylene (iPP)/silica composites to better understand their structure–property relationships. Isotactic polypropylene composites with 2, 4, 6, 8 vol % of added silica fillers differing in particle size (micro‐ vs. nanosilica) and surface modification (untreated vs. treated surface) were prepared by nonisothermal compression molding and characterized by different methods. The addition of all silica fillers grades to the iPP matrix significantly influenced the spherulitic morphology, while phase characteristics of the iPP matrix seemed to be unaffected. Surface modification of silica fillers exhibited stronger effects on spherulite size than size of silica particles. Nonpolar silica particles, more miscible or compatible with iPP chains than polar silica particles, enabled better spherulitic growth. The spherulite sizes tended to reach equal values at 8 vol % of added silicas showing that spherulite size became independent of filler concentration and surface modification above optimum filler concentration. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- 20 October 2008
- Published by Wiley in Polymer Composites
- Vol. 30 (8) , 1091-1097
Wollastonite‐reinforced polypropylene composites modified with novel metallocene EPR copolymers. II. Mechanical properties and adhesion
Mechanical properties and adhesion phenomena of isotactic polypropylene/wollastonite/metallocene propylene‐ethylene copolymers (iPP/W/EPR) composites were studied as a function of metallocene propylene‐based copolymers content from 0 to 20 vol%. The composites with different surface treated wollastonites and two types of EPR have shown similar behavior of most mechanical properties except elongation at break and impact strength respective of the difference in some characteristics of used EPR elastomers. The increase and the difference in elongation at break could be explained by renewed spherulitic morphology of the iPP matrix. Stronger interactions between EPR‐1 and two used types of wollastonites than between EPR‐2 and corresponding wollastonites concluded from the surface properties led to the difference in impact strength behavior. The determined mechanical properties confirm the assumption coming out of structural investigations that metallocene EPR elastomers are rather efficient impact modifiers than encapsulation compatibilizers for the iPP/wollastonite composites. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers
- 20 October 2008
- Published by Wiley in Polymer Composites
- Vol. 30 (8) , 1091-1097
Wollastonite‐reinforced polypropylene composites modified with novel metallocene EPR copolymers. II. Mechanical properties and adhesion
Mechanical properties and adhesion phenomena of isotactic polypropylene/wollastonite/metallocene propylene‐ethylene copolymers (iPP/W/EPR) composites were studied as a function of metallocene propylene‐based copolymers content from 0 to 20 vol%. The composites with different surface treated wollastonites and two types of EPR have shown similar behavior of most mechanical properties except elongation at break and impact strength respective of the difference in some characteristics of used EPR elastomers. The increase and the difference in elongation at break could be explained by renewed spherulitic morphology of the iPP matrix. Stronger interactions between EPR‐1 and two used types of wollastonites than between EPR‐2 and corresponding wollastonites concluded from the surface properties led to the difference in impact strength behavior. The determined mechanical properties confirm the assumption coming out of structural investigations that metallocene EPR elastomers are rather efficient impact modifiers than encapsulation compatibilizers for the iPP/wollastonite composites. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers
- 20 October 2008
- Published by Wiley in Polymer Composites
- Vol. 30 (7) , 1007-1015
Wollastonite‐reinforced polypropylene composites modified with novel metallocene EPR copolymers. I. Phase structure and morphology
Supermolecular structure of isotactic polypropylene/wollastonite/metallocene propylene–ethylene copolymers (iPP/W/EPR) composites was studied as a function of elastomer content (from 0 to 20 vol%) by optical, scanning, and transmission electron microscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry. Both, wollastonite and dispersed EPR particles, homogeneously incorporated into the iPP matrix, and affected the final phase structure and morphology of the iPP/wollastonite/EPR composites. Wollastonite particles were orientated plane‐parallel to the sample surface and hindered spherulite growth of the iPP matrix. EPRs enhanced plane‐parallel orientation of wollastonite and simultaneously enhanced the spherulite and crystallite growth in the iPP matrix during the solidification of polymer melt. Ternary iPP/wollastonite/EPR composites exhibited significant prevalence of separated microphase morphology (over core‐shell morphology) because of constitution similarity of P‐E and iPP chains. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers.
- 20 October 2008
- Published by Wiley in Polymer Composites
- Vol. 30 (7) , 1007-1015
Wollastonite‐reinforced polypropylene composites modified with novel metallocene EPR copolymers. I. Phase structure and morphology
Supermolecular structure of isotactic polypropylene/wollastonite/metallocene propylene–ethylene copolymers (iPP/W/EPR) composites was studied as a function of elastomer content (from 0 to 20 vol%) by optical, scanning, and transmission electron microscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry. Both, wollastonite and dispersed EPR particles, homogeneously incorporated into the iPP matrix, and affected the final phase structure and morphology of the iPP/wollastonite/EPR composites. Wollastonite particles were orientated plane‐parallel to the sample surface and hindered spherulite growth of the iPP matrix. EPRs enhanced plane‐parallel orientation of wollastonite and simultaneously enhanced the spherulite and crystallite growth in the iPP matrix during the solidification of polymer melt. Ternary iPP/wollastonite/EPR composites exhibited significant prevalence of separated microphase morphology (over core‐shell morphology) because of constitution similarity of P‐E and iPP chains. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers.
- 1 November 2007
- Published by Wiley in Polymer Engineering & Science
- Vol. 47 (12) , 2145-2154
Phase structure and morphology of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐g‐MA elastomers
Supermolecular structure of isotactic polypropylene/wollastonite/styrenic rubber block copolymers composites were studied as a function of elastomeric poly‐ (styrene‐b‐ethylene‐co‐butylene‐b‐styrene) triblock copolymer (SEBS) and the SEBS grafted with maleic anhydride (SEBS‐g‐MA) content (from 0 to 20 vol%) by optical, scanning, and transmission electron microscopy, wide‐angle X‐ray diffraction and differential scanning calorimetry. Wollastonite particles disturbed the spherulitization of polypropylene matrix. Both elastomers affected the crystallization of polypropylene matrix mainly by solidification effect. Although SEBS‐g‐MA encapsulated wollastonite particles more expressive than SEBS forming thus core‐shell morphology in higher extent, scanning electron micrographs indicated more constrained wollastonite particles in fractured surfaces of composites with SEBS elastomer. Moreover, SEBS‐g‐MA disorientated wollastonite particles and affected reorientation of the polypropylene crystallites stronger than SEBS elastomer. POLYM. ENG. SCI., 47:2145–2154, 2007. © 2007 Society of Plastics Engineers
- 1 November 2007
- Published by Wiley in Polymer Engineering & Science
- Vol. 47 (12) , 2145-2154
Phase structure and morphology of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐g‐MA elastomers
Supermolecular structure of isotactic polypropylene/wollastonite/styrenic rubber block copolymers composites were studied as a function of elastomeric poly‐ (styrene‐b‐ethylene‐co‐butylene‐b‐styrene) triblock copolymer (SEBS) and the SEBS grafted with maleic anhydride (SEBS‐g‐MA) content (from 0 to 20 vol%) by optical, scanning, and transmission electron microscopy, wide‐angle X‐ray diffraction and differential scanning calorimetry. Wollastonite particles disturbed the spherulitization of polypropylene matrix. Both elastomers affected the crystallization of polypropylene matrix mainly by solidification effect. Although SEBS‐g‐MA encapsulated wollastonite particles more expressive than SEBS forming thus core‐shell morphology in higher extent, scanning electron micrographs indicated more constrained wollastonite particles in fractured surfaces of composites with SEBS elastomer. Moreover, SEBS‐g‐MA disorientated wollastonite particles and affected reorientation of the polypropylene crystallites stronger than SEBS elastomer. POLYM. ENG. SCI., 47:2145–2154, 2007. © 2007 Society of Plastics Engineers
- 28 September 2007
- Published by Wiley in Polymer Engineering & Science
- Vol. 47 (11) , 1873-1880
Mechanical properties of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐ g ‐MA elastomers
Mechanical properties of isotactic polypropylene/wollastonite/styrene rubber block copolymers (iPP/wollastonite/SRBC) composites were studied as a function of elastomeric poly(styrene‐ b ‐ethylene‐ co ‐butylene‐ b ‐styrene) triblock copolymer (SEBS) and SEBS grafted with maleic anhydride (SEBS‐ g ‐MA) content from 0 to 20 vol%. Microphase morphology was stronger influenced by SRBC elastomers than by different wollastonite types. Higher encapsulation ability of SEBS‐ g ‐MA than SEBS caused more expressive core‐shell morphology and consequently higher notched impact strength as well as yield parameters, but lower Young's modulus. Higher ductility of the composites with SEBS than with SEBS‐ g ‐MA has been primarily caused by better miscibility of the polypropylene chains with SEBS molecules. Surface properties of components and adhesion parameters also indicated that adhesion at SEBS‐ g ‐MA/wollastonite interface, which was stronger than the one at the SEBS/wollastonite interface, influenced higher encapsulation of wollastonite particles by SEBS‐ g ‐MA. POLYM. ENG. SCI., 47:1873–1880, 2007. © 2007 Society of Plastics Engineers
- 28 September 2007
- Published by Wiley in Polymer Engineering & Science
- Vol. 47 (11) , 1873-1880
Mechanical properties of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐ g ‐MA elastomers
Mechanical properties of isotactic polypropylene/wollastonite/styrene rubber block copolymers (iPP/wollastonite/SRBC) composites were studied as a function of elastomeric poly(styrene‐ b ‐ethylene‐ co ‐butylene‐ b ‐styrene) triblock copolymer (SEBS) and SEBS grafted with maleic anhydride (SEBS‐ g ‐MA) content from 0 to 20 vol%. Microphase morphology was stronger influenced by SRBC elastomers than by different wollastonite types. Higher encapsulation ability of SEBS‐ g ‐MA than SEBS caused more expressive core‐shell morphology and consequently higher notched impact strength as well as yield parameters, but lower Young's modulus. Higher ductility of the composites with SEBS than with SEBS‐ g ‐MA has been primarily caused by better miscibility of the polypropylene chains with SEBS molecules. Surface properties of components and adhesion parameters also indicated that adhesion at SEBS‐ g ‐MA/wollastonite interface, which was stronger than the one at the SEBS/wollastonite interface, influenced higher encapsulation of wollastonite particles by SEBS‐ g ‐MA. POLYM. ENG. SCI., 47:1873–1880, 2007. © 2007 Society of Plastics Engineers
- 1 October 2004
- Published by Wiley in Macromolecular Symposia
- Vol. 217 (1) , 401-412
Influence of Talc and SEBS-g-MA on PP/SEBS-g-MA/Talc Composites under Gamma Irradiation Sterilization Conditions
- 1 October 2004
- Published by Wiley in Macromolecular Symposia
- Vol. 217 (1) , 401-412
Influence of Talc and SEBS-g-MA on PP/SEBS-g-MA/Talc Composites under Gamma Irradiation Sterilization Conditions
- 13 October 2002
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 6 (4) , 206-213
Composites of Poly(Acrylate) Copolymer filled with diatomaceous earth: morphology and mechanical behaviour
. Failure mechanisms of poly(acrylate) (PA) copolymer system filled with a diatom filler have been studied. The natural diatom filler is characterised by the original skeletal structure which allows high "inner" porosity and thus matrix penetration inside the filler particles and agglomerates of various shapes in PA composite. High diatom filler crystallinity influences the matrix re-structurization by changing the intensity ratio of matrix amorphous halos indicating the increased composite film inhomogeneity. Interactions at the interface between diatom filler and PA copolymer matrix, specially for coarse cylindrical-shaped particles are low, showing low adhesion in the composite. We see composite weakening with the increased filler volume fraction, i.e. lowering the composite strength at break as a consequence of lower degree of interactions. On the other hand, the composite modulus and the yield strength increased as a result of matrix hardening due to the pronounced matrix penetration inside the porous diatom filler. The mechanisms of failure depend on the location with the lowest product of composite module and break energy. Because dewetting occurred, it is the product EG in the interfacial region between PA matrix and diatom filler particles that was relevant. The effects of filler characteristics, may be followed through an interaction coefficients calculated from a model equations. The numerical values of coefficients in the model are only comparative, but the relative values can be connected with changes at the interface.
- 13 October 2002
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 6 (4) , 206-213
Composites of Poly(Acrylate) Copolymer filled with diatomaceous earth: morphology and mechanical behaviour
. Failure mechanisms of poly(acrylate) (PA) copolymer system filled with a diatom filler have been studied. The natural diatom filler is characterised by the original skeletal structure which allows high "inner" porosity and thus matrix penetration inside the filler particles and agglomerates of various shapes in PA composite. High diatom filler crystallinity influences the matrix re-structurization by changing the intensity ratio of matrix amorphous halos indicating the increased composite film inhomogeneity. Interactions at the interface between diatom filler and PA copolymer matrix, specially for coarse cylindrical-shaped particles are low, showing low adhesion in the composite. We see composite weakening with the increased filler volume fraction, i.e. lowering the composite strength at break as a consequence of lower degree of interactions. On the other hand, the composite modulus and the yield strength increased as a result of matrix hardening due to the pronounced matrix penetration inside the porous diatom filler. The mechanisms of failure depend on the location with the lowest product of composite module and break energy. Because dewetting occurred, it is the product EG in the interfacial region between PA matrix and diatom filler particles that was relevant. The effects of filler characteristics, may be followed through an interaction coefficients calculated from a model equations. The numerical values of coefficients in the model are only comparative, but the relative values can be connected with changes at the interface.