Yaw-Dong Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yaw-Dong Wu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Tien-Tsorng Shih
Department of Electronic Engineering , National Kaohsiung University of Applied Sciences , Kaohsiung , Taiwan, R.O.C.
8 shared publications- Mao-Hsiung Chen
National Sun Yat-Sen Univ. (Taiwan)
7 shared publications Jian-Jang Lee
Department of Electronic Engineering , National Kaohsiung University of Applied Sciences , Kaohsiung , Taiwan, R.O.C.
5 shared publicationsChih-Wen Kuo
4 shared publicationsMao-Hsiung Chen
Department of Electrical Engineering, National SunYat-Sen University, Kaohsiung, Taiwan, ROC
4 shared publicationsChih-Fu Chang
Department of Electrical Engineering, National SunYat-Sen University, Kaohsiung, Taiwan, ROC
3 shared publications
Latest Publications
- 12 April 2017
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 49 (5) , 181
Analyzing the multilayer metamaterial waveguide structure with the Kerr-type nonlinear cladding
- 12 April 2017
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 49 (5) , 181
Analyzing the multilayer metamaterial waveguide structure with the Kerr-type nonlinear cladding
- Open Access
- 1 January 2015
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research M
- Vol. 43, 71-79
ALL-OPTICAL LOGIC GATES BASED ON SPATIAL-SOLITON INTERACTIONS IN OPTICAL COMMUNICATION SPECTRAL REGION
New designs of all-optical logic gates based on spatial-soliton interactions in optical communication spectral regions were proposed. The proposed structures are composed of local nonlinear Mach-Zehnder interferometer (MZI) waveguide structures with multi-input ports and two nonlinear output ports. They can be used to design various all-optical logic gates. The nonlinear MZI waveguide structure with local nonlinear waveguides functions like a phase shifter. It employs angular deflection of spatial solitons controlled by the phase modulation created in the local nonlinear MZI. The light-induced index changes in the local nonlinear MZI waveguide structures break the symmetry of structure and make the output signal beam propagate through different nonlinear output waveguides. By properly choosing the input control power, the spatial solitons will be switched to different output ports. The numerical results show that the proposed local nonlinear MZI waveguide structures could really function as all-optical logic gates in the optical communication spectral region.
- 1 January 2015
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research M
- Vol. 43, 71-79
Open AccessALL-OPTICAL LOGIC GATES BASED ON SPATIAL-SOLITON INTERACTIONS IN OPTICAL COMMUNICATION SPECTRAL REGION
New designs of all-optical logic gates based on spatial-soliton interactions in optical communication spectral regions were proposed. The proposed structures are composed of local nonlinear Mach-Zehnder interferometer (MZI) waveguide structures with multi-input ports and two nonlinear output ports. They can be used to design various all-optical logic gates. The nonlinear MZI waveguide structure with local nonlinear waveguides functions like a phase shifter. It employs angular deflection of spatial solitons controlled by the phase modulation created in the local nonlinear MZI. The light-induced index changes in the local nonlinear MZI waveguide structures break the symmetry of structure and make the output signal beam propagate through different nonlinear output waveguides. By properly choosing the input control power, the spatial solitons will be switched to different output ports. The numerical results show that the proposed local nonlinear MZI waveguide structures could really function as all-optical logic gates in the optical communication spectral region.
- 3 September 2014
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 28 (16) , 2025-2033
Nonlinear all-optical WDM based on spatial solitons in optical communication spectral regions
A new design of nonlinear all-optical wavelength division multiplexer (WDM) based on spatial solitons in optical communication spectral regions was proposed. By using the swing effect of spatial solitons in a Kerr-type nonlinear medium, the proposed nonlinear waveguide structure could function as an all-optical WDM. The numerical results show that the transmission efficiency is higher than 94%. The device separates spatial solitons interaction in a Kerr-type nonlinear medium and can be used in WDM networks with fixed-tuned receiver and tunable transmitter. It would be a potential key component in the applications of ultra-high-speed and ultra-high-capacity optical communications and optical data processing systems.
- 3 September 2014
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 28 (16) , 2025-2033
Nonlinear all-optical WDM based on spatial solitons in optical communication spectral regions
A new design of nonlinear all-optical wavelength division multiplexer (WDM) based on spatial solitons in optical communication spectral regions was proposed. By using the swing effect of spatial solitons in a Kerr-type nonlinear medium, the proposed nonlinear waveguide structure could function as an all-optical WDM. The numerical results show that the transmission efficiency is higher than 94%. The device separates spatial solitons interaction in a Kerr-type nonlinear medium and can be used in WDM networks with fixed-tuned receiver and tunable transmitter. It would be a potential key component in the applications of ultra-high-speed and ultra-high-capacity optical communications and optical data processing systems.
- 1 January 2014
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 12 (11) , 110607-110611
New design of triplexer based on metal–insulator–metal plasmonic ring resonators
In this work, we propose a new design of all-optical triplexer based on of metal–insulator–metal (MIM) plasmonic waveguide structures and ring resonators. By adjusting the radii of ring resonators and the gap distance, certain wavelengths can be filtered out and the crosstalk of each channel can also be reduced. The numerical results show that the proposed MIM plasmonic waveguide structure can really function as an -optical triplexer with respect to the three wavelengths, that is, 1310, 1490, and 1550 nm, respectively. It can be widely used as the fiber access network element for multiplexer–demultiplexer wavelength selective in -fiber-to-the-home communication systems with transmission efficiency higher than 90%. It can also be a potential key component in the applications of the biosensing systems.
- 1 January 2014
- Published by Shanghai Institute of Optics and Fine Mechanics in Chinese Optics Letters
- Vol. 12 (11) , 110607-110611
New design of triplexer based on metal–insulator–metal plasmonic ring resonators
In this work, we propose a new design of all-optical triplexer based on of metal–insulator–metal (MIM) plasmonic waveguide structures and ring resonators. By adjusting the radii of ring resonators and the gap distance, certain wavelengths can be filtered out and the crosstalk of each channel can also be reduced. The numerical results show that the proposed MIM plasmonic waveguide structure can really function as an -optical triplexer with respect to the three wavelengths, that is, 1310, 1490, and 1550 nm, respectively. It can be widely used as the fiber access network element for multiplexer–demultiplexer wavelength selective in -fiber-to-the-home communication systems with transmission efficiency higher than 90%. It can also be a potential key component in the applications of the biosensing systems.
- 1 January 2013
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research
- Vol. 138, 327-336
A GENERAL RULE FOR DESIGNING MULTIBRANCH HIGH-ORDER MODE CONVERTER
- 1 January 2013
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research
- Vol. 138, 327-336
A GENERAL RULE FOR DESIGNING MULTIBRANCH HIGH-ORDER MODE CONVERTER
- 1 November 2012
- Published by Taylor & Francis in Fiber and Integrated Optics
- Vol. 31 (6) , 369-382
Proposal for a New Dense Wavelength Division Multiplexing Filter Based on Two-Dimensional Photonic Crystal Ring Resonator
A new optical filter design based on a two-dimensional photonic crystal ring resonator structure with an N-channel model is proposed in this article. This study also shows that modifying the scatter radius and the waveguide width can significantly improve the performance of the original structure, which can solve the mode mismatch problem for output waveguide. Here, an example of a 16-channel photonic crystal ring resonator is provided; wavelength spacing of 1.6 nm and a high quality factor Q of 6,000 were achieved. The optical filter would be a potential key component in the application of dense wavelength division multiplexer devices.
- 1 November 2012
- Published by Taylor & Francis in Fiber and Integrated Optics
- Vol. 31 (6) , 369-382
Proposal for a New Dense Wavelength Division Multiplexing Filter Based on Two-Dimensional Photonic Crystal Ring Resonator
A new optical filter design based on a two-dimensional photonic crystal ring resonator structure with an N-channel model is proposed in this article. This study also shows that modifying the scatter radius and the waveguide width can significantly improve the performance of the original structure, which can solve the mode mismatch problem for output waveguide. Here, an example of a 16-channel photonic crystal ring resonator is provided; wavelength spacing of 1.6 nm and a high quality factor Q of 6,000 were achieved. The optical filter would be a potential key component in the application of dense wavelength division multiplexer devices.
- 20 November 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7631, 763123
New design of a triplexer using ring resonator integrated with directional coupler based on photonic crystals
In this paper, we proposed the design of directional coupler integrated with ring resonator based on two-dimensional photonic crystals (2D PCs) to develop a triplexer filter. It can be widely used as the fiber access network element for multiplexer-demultiplexer wavelength selective in fiber-to-the-home (FTTH) communication systems. The directional coupler is chosen to separate the wavelengths of 1490nm and 1310nm. The ring resonator separates the wavelength of 1550nm. The transmission efficiency is larger than 90%. Besides, the total size of propose triplexer is only 19μm×12μm. We present simulation results using the finite-difference time-domain (FDTD) method for the proposed structure.
- 20 November 2009
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7631, 763123
New design of a triplexer using ring resonator integrated with directional coupler based on photonic crystals
In this paper, we proposed the design of directional coupler integrated with ring resonator based on two-dimensional photonic crystals (2D PCs) to develop a triplexer filter. It can be widely used as the fiber access network element for multiplexer-demultiplexer wavelength selective in fiber-to-the-home (FTTH) communication systems. The directional coupler is chosen to separate the wavelengths of 1490nm and 1310nm. The ring resonator separates the wavelength of 1550nm. The transmission efficiency is larger than 90%. Besides, the total size of propose triplexer is only 19μm×12μm. We present simulation results using the finite-difference time-domain (FDTD) method for the proposed structure.
- 8 June 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (25) , F25
High-quality-factor filter based on a photonic crystal ring resonator for wavelength division multiplexing applications
We investigate the properties of ring resonators that are supported by a two-dimensional photonic crystal waveguide. The proposed structure composed of a photonic crystal ring resonator (PCRR) with four scatters can really function as a wavelength division multiplexer. The significance of the design is that the output waveguide is perpendicular to the ring resonator. We numerically demonstrate that the proposed four-channel PCRR device with inner dielectric rods can provide a transmission efficiency larger than 92%, a quality factor higher than 3800, and crosstalk of less than .- 8 June 2009
- Published by Optica Publishing Group in Applied Optics
- Vol. 48 (25) , F25
High-quality-factor filter based on a photonic crystal ring resonator for wavelength division multiplexing applications
We investigate the properties of ring resonators that are supported by a two-dimensional photonic crystal waveguide. The proposed structure composed of a photonic crystal ring resonator (PCRR) with four scatters can really function as a wavelength division multiplexer. The significance of the design is that the output waveguide is perpendicular to the ring resonator. We numerically demonstrate that the proposed four-channel PCRR device with inner dielectric rods can provide a transmission efficiency larger than 92%, a quality factor higher than 3800, and crosstalk of less than .- 10 March 2009
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 26 (4) , 640-644
New design of four-channel add-drop filters based on double-resonant cavity photonic crystals
We proposed a new double-resonant cavity four-channel add–drop filter based on the in-plane type two-dimensional (2D) photonic crystal with square lattice. Through this novel double-resonant cavity, WDM signals can be coupled in or out of the bus waveguide with 100% add–drop efficiency while completely prohibiting cross talk between the bus and the add–drop waveguides for all other wavelengths. This device could be used as an optical add–drop multiplexer (OADM) in coarse wavelength division multiplexing (CWDM) applications.
- 10 March 2009
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 26 (4) , 640-644
New design of four-channel add-drop filters based on double-resonant cavity photonic crystals
We proposed a new double-resonant cavity four-channel add–drop filter based on the in-plane type two-dimensional (2D) photonic crystal with square lattice. Through this novel double-resonant cavity, WDM signals can be coupled in or out of the bus waveguide with 100% add–drop efficiency while completely prohibiting cross talk between the bus and the add–drop waveguides for all other wavelengths. This device could be used as an optical add–drop multiplexer (OADM) in coarse wavelength division multiplexing (CWDM) applications.
- 1 May 2008
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 40 (7) , 495-512
The study of multilayer planar optical waveguide structure with nonlinear cladding
- 1 May 2008
- Published by Springer Nature in Optical and Quantum Electronics
- Vol. 40 (7) , 495-512
The study of multilayer planar optical waveguide structure with nonlinear cladding