Bruce D. Begg
Research Subjects
Research Interests
Bruce D. Begg has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
E. R. Vance
Materials Division, ANSTO, PMB 1, Menai, NSW, 2234, Australia
2 shared publications- Eric R. Vance
Australian Nuclear Science and Technology Organisation, Institute of Materials and Engineering Science, New Illawarra road, Menai, NSW 2234, Australia, 61-2-9717-3019
2 shared publications A. Brownscombe
Materials Division, ANSTO, PMB 1, Menai, NSW, 2234, Australia
1 shared publicationA. van Luik
1 shared publication- A.J. Hooper
Alan Hooper Consulting Ltd, 5 Wickwar Road, Kingswood, Wotton-under-Edge, Gloucestershire GL12 8RF, UK
1 shared publication - Ana Hidalgo
Foro de la Biodivesidad, Estación Biológica de Doñana
1 shared publication
Latest Publications
- 1 January 2010
- Published by Elsevier
- p. 261-285
Immobilisation of spent nuclear fuel and high-level radioactive waste for safe disposal in geological repository systems
- 1 January 2010
- Published by Elsevier
- p. 261-285
Immobilisation of spent nuclear fuel and high-level radioactive waste for safe disposal in geological repository systems
- 1 January 2010
- Published by Elsevier
Contributor contact details
- 1 January 2010
- Published by Springer Nature in MRS Proceedings
- Vol. 1265
Capture and Sequestration of Radioactive Iodine
- 1 January 2010
- Published by Springer Nature in MRS Proceedings
- Vol. 1265
Capture and Sequestration of Radioactive Iodine
- 2 April 2001
- Published by Office of Scientific and Technical Information (OSTI)
Solid Solubilities of Pu, U, Gd and Hf in Candidate Ceramic Nuclear Wasteforms
This goal of this research project was to determine the solid solubility of Pu, U, Gd, and Hf in candidate ceramics for immobilization of high-level nuclear waste. The experimental approach was to saturate each phase by adding more than the solid solubility limit of the given cation, using a nominated substitution scheme, and then analyzing the candidate phase that formed to evaluate the solid solubility limit under firing conditions. Confirmation that the solid solution limit had been reached insofar as other phases rich in the cation of interest was also required. The candidate phases were monazite, titanite, zirconolite, perovskite, apatite, pyrochlore, and brannerite. The valences of Pu and U were typically deduced from the firing atmosphere, and charge balancing in the candidate phase composition as evaluated from electron microscopy, although in some cases it was measured directly by x-ray absorption and diffuse reflectance spectroscopies (for U). Tetravalent Pu and U have restricted (< 0.1 formula units) solid solubility in apatite, titanite, and perovskite. Trivalent Pu has a larger solubility in apatite and perovskite than Pu4+. U3+ appears to be a credible species in reduced perovskite with a solubility of {approximately} 0.25 f.u. as opposed to {approximately} 0.05 f.u. for U4+.more » Pu4+ is a viable species in monazite and is promoted at lower firing temperatures ({approximately} 800 C) in an air atmosphere. Hf solubility is restricted in apatite, monazite (< 0.1 f.u.), but is {approximately} 0.2 and 0.5 f.u. in brannerite and titanite, respectively. Gd solubility is extended in all phases except for titanite ({approximately} 0.3 f.u.). U5+ was identified by DRS observations of absorption bands in the visible/near infrared photon energy ranges in brannerite and zirconolite, and U4+ in zirconolite was similarly identified.« less
- 2 April 2001
- Published by Office of Scientific and Technical Information (OSTI)
Solid Solubilities of Pu, U, Gd and Hf in Candidate Ceramic Nuclear Wasteforms
This goal of this research project was to determine the solid solubility of Pu, U, Gd, and Hf in candidate ceramics for immobilization of high-level nuclear waste. The experimental approach was to saturate each phase by adding more than the solid solubility limit of the given cation, using a nominated substitution scheme, and then analyzing the candidate phase that formed to evaluate the solid solubility limit under firing conditions. Confirmation that the solid solution limit had been reached insofar as other phases rich in the cation of interest was also required. The candidate phases were monazite, titanite, zirconolite, perovskite, apatite, pyrochlore, and brannerite. The valences of Pu and U were typically deduced from the firing atmosphere, and charge balancing in the candidate phase composition as evaluated from electron microscopy, although in some cases it was measured directly by x-ray absorption and diffuse reflectance spectroscopies (for U). Tetravalent Pu and U have restricted (< 0.1 formula units) solid solubility in apatite, titanite, and perovskite. Trivalent Pu has a larger solubility in apatite and perovskite than Pu4+. U3+ appears to be a credible species in reduced perovskite with a solubility of {approximately} 0.25 f.u. as opposed to {approximately} 0.05 f.u. for U4+.more » Pu4+ is a viable species in monazite and is promoted at lower firing temperatures ({approximately} 800 C) in an air atmosphere. Hf solubility is restricted in apatite, monazite (< 0.1 f.u.), but is {approximately} 0.2 and 0.5 f.u. in brannerite and titanite, respectively. Gd solubility is extended in all phases except for titanite ({approximately} 0.3 f.u.). U5+ was identified by DRS observations of absorption bands in the visible/near infrared photon energy ranges in brannerite and zirconolite, and U4+ in zirconolite was similarly identified.« less
- 1 January 2000
- Published by Springer Nature in MRS Proceedings
- Vol. 663
Structural Effect of Pu Substitutions on the Zr-Site in Zirconolite
As the level of Pu4+ substituted on the Zr-site in CaZr1-xPuxTi2O7 zirconolite increased, from x=0.1 to 0.6, a series of structural transitions occurred from zirconolite-2M to zirconolite-4M and subsequently from zirconolite-4M to pyrochlore. The solid-solution limit for Pu4+ substituted on the Zr-site in zirconolite-2M was ~ 0.15 formula units. Zirconolite-4M was only stable over a narrow compositional range, centered about CaZr0.59Pu0.41Ti2O7, whilst the pyrochlore structure was stabilized with CaZr0.4Pu0.6Ti2O7 stoichiometry. The stability of the zirconolite polytypes is therefore sensitive to the average effective ionic size of the ions occupying the seven-coordinated Zr-site. The reduction in Pu from Pu4+ to Pu3+ destabilized the zirconolite-4M, producing a mixture of perovskite and possibly zirconolite-3T. The CaZr0.4Pu0.6Ti2O7 pyrochlore was also predominantly transformed to perovskite as a result of this reduction of Pu.
- 1 January 2000
- Published by Springer Nature in MRS Proceedings
- Vol. 663
Structural Effect of Pu Substitutions on the Zr-Site in Zirconolite
As the level of Pu4+ substituted on the Zr-site in CaZr1-xPuxTi2O7 zirconolite increased, from x=0.1 to 0.6, a series of structural transitions occurred from zirconolite-2M to zirconolite-4M and subsequently from zirconolite-4M to pyrochlore. The solid-solution limit for Pu4+ substituted on the Zr-site in zirconolite-2M was ~ 0.15 formula units. Zirconolite-4M was only stable over a narrow compositional range, centered about CaZr0.59Pu0.41Ti2O7, whilst the pyrochlore structure was stabilized with CaZr0.4Pu0.6Ti2O7 stoichiometry. The stability of the zirconolite polytypes is therefore sensitive to the average effective ionic size of the ions occupying the seven-coordinated Zr-site. The reduction in Pu from Pu4+ to Pu3+ destabilized the zirconolite-4M, producing a mixture of perovskite and possibly zirconolite-3T. The CaZr0.4Pu0.6Ti2O7 pyrochlore was also predominantly transformed to perovskite as a result of this reduction of Pu.
- 1 January 1997
- Published by Springer Nature in MRS Proceedings
- Vol. 506
Charge Compensation and the Incorporation of Cerium in Zirconolite and Perovskite
The incorporation of cerium, as a simulant for plutonium, has been investigated in both zirconolite and perovskite under oxidising and reducing conditions. The Ce valence in zirconolite was very sensitive to the processing atmosphere, whilst in perovskite the valence of the Ce was determined essentially by the chemical design of the perovskite. Charge compensation in zirconolite and perovskite samples displaying an apparent excess of positive charge was inferred to occur by the formation of cation vacancies, in samples prepared under oxidising conditions, and by trivalent Ti being produced in samples subject to a reducing atmosphere. Oxygen vacancies are inferred to be present in samples exhibiting an apparent excess of negative charge.
- 1 January 1997
- Published by Springer Nature in MRS Proceedings
- Vol. 506
Charge Compensation and the Incorporation of Cerium in Zirconolite and Perovskite
The incorporation of cerium, as a simulant for plutonium, has been investigated in both zirconolite and perovskite under oxidising and reducing conditions. The Ce valence in zirconolite was very sensitive to the processing atmosphere, whilst in perovskite the valence of the Ce was determined essentially by the chemical design of the perovskite. Charge compensation in zirconolite and perovskite samples displaying an apparent excess of positive charge was inferred to occur by the formation of cation vacancies, in samples prepared under oxidising conditions, and by trivalent Ti being produced in samples subject to a reducing atmosphere. Oxygen vacancies are inferred to be present in samples exhibiting an apparent excess of negative charge.
- 1 January 1996
- Published by Springer Nature in MRS Proceedings
- Vol. 465
The Incorporation of Cerium in Zirconolite
Zirconolite (CaZrTi2O7) is the primary actinide-bearing Synroc phase for the immobilisation of high-level nuclear waste. Using X-ray absorption spectroscopy and microanalysis we have investigated the incorporation of cerium, as a simulant for plutonium, on both zirconolite's Ca and Zr sites under a range of redox conditions. The Ce valence state was found to vary between Ce3+ and Ce4+ depending on the both the sintering atmosphere and temperature. The existence of alternative charge compensation schemes, predominantly cation vacancies, in addition to those used in the sample design was inferred in many of the zirconolites and will be discussed in detail.
- 1 January 1996
- Published by Springer Nature in MRS Proceedings
- Vol. 465
The Incorporation of Cerium in Zirconolite
Zirconolite (CaZrTi2O7) is the primary actinide-bearing Synroc phase for the immobilisation of high-level nuclear waste. Using X-ray absorption spectroscopy and microanalysis we have investigated the incorporation of cerium, as a simulant for plutonium, on both zirconolite's Ca and Zr sites under a range of redox conditions. The Ce valence state was found to vary between Ce3+ and Ce4+ depending on the both the sintering atmosphere and temperature. The existence of alternative charge compensation schemes, predominantly cation vacancies, in addition to those used in the sample design was inferred in many of the zirconolites and will be discussed in detail.
- 1 January 1996
- Published by Springer Nature in MRS Proceedings
- Vol. 465
Plutonium and Neptunium Incorporation in Zirconolite
The incorporation of Pu and Np in zirconolite (CaZrTi2O7) has been investigated over a range of redox conditions. Zirconolite formulations designed to favour either trivalent or tetravalent Pu and Np were prepared by limiting the amount of charge compensating additives available to maintain electroneutrality. From near-edge X-ray absorption spectroscopy the Pu valence state was found to vary with the processing atmosphere, from completely tetravalent when fired in air, and located on either the Ca or Zr sites, to trivalent, when substituted on the Ca site after annealing in 3.5% H2/N2. Np was predominantly tetravalent over the range of redox conditions examined and was readily incorporated on either of zirconolite's Ca or Zr sites. The charge compensation mechanisms at work in different zirconolites are also discussed.
- 1 January 1996
- Published by Springer Nature in MRS Proceedings
- Vol. 465
Plutonium and Neptunium Incorporation in Zirconolite
The incorporation of Pu and Np in zirconolite (CaZrTi2O7) has been investigated over a range of redox conditions. Zirconolite formulations designed to favour either trivalent or tetravalent Pu and Np were prepared by limiting the amount of charge compensating additives available to maintain electroneutrality. From near-edge X-ray absorption spectroscopy the Pu valence state was found to vary with the processing atmosphere, from completely tetravalent when fired in air, and located on either the Ca or Zr sites, to trivalent, when substituted on the Ca site after annealing in 3.5% H2/N2. Np was predominantly tetravalent over the range of redox conditions examined and was readily incorporated on either of zirconolite's Ca or Zr sites. The charge compensation mechanisms at work in different zirconolites are also discussed.