Xin Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xin Zhang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Qinrong Wang
Department of Chemistry, Shantou University, Shantou 515063, PR China
5 shared publicationsFangfang Wang
Department of Chemistry, Science Faculty, Shantou University, Shantou, China
3 shared publicationsJun Yu
Department of Chemistry, Science Faculty, Shantou University, Shantou, China
3 shared publications- Kwong-Yu Chan
Department of Chemistry, The University of Hong Kong, Pokfulam Road, Hong Kong
3 shared publications - Daojun Liu
Department of Pharmacy, Shantou University Medical College, Shantou 515041, China
2 shared publications Feng Zhang
Department of Chemistry, Shantou University, Shantou 515063, China
2 shared publications
Latest Publications
- Open Access
Construct α-FeOOH-Reduced Graphene Oxide Aerogel as a Carrier for Glucose Oxidase Electrode
A promising α-FeOOH-reduced graphene oxide aerogel (FeOOH-GA) has been prepared for the assembly of an enzyme electrode. The α-FeOOH-reduced graphene oxide aerogel was characterized by X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The results reveal that graphene oxide is reduced by Fe2+ ion and α-FeOOH nanorods anchored on the reduced graphene oxide sheet through the Fe-O-C bond. Analyses using scanning electron microscopy and the Brunauer–Emmett–Teller method show that FeOOH-GA displays a various and interconnected pore structure. The FeOOH-GA was used as a support material on the glass carbon electrode (GCE) for glucose oxidase (GOD). Electrochemistry properties and bioelectrocatalytic activities of Nafion/GOD/FeOOH-GA/GCE were achieved from cyclic voltammetry and electrochemical impedance spectroscopy. The results show that Nafion/GOD/FeOOH-GA/GCE maintains outstanding catalytic activity and electrochemical properties. The FeOOH-GA could immobilize GOD through the hydrophobicity of the reduced graphene oxide and hydroxide radical of α-FeOOH. Appropriate α-FeOOH and diversified pore structure are beneficial for electron transfer, enzyme electrode storage, and interfacial electron transfer rate. All results indicated that the α-FeOOH-reduced graphene oxide aerogel as a carrier could effectively immobilize the tested enzyme.
Open AccessConstruct α-FeOOH-Reduced Graphene Oxide Aerogel as a Carrier for Glucose Oxidase Electrode
A promising α-FeOOH-reduced graphene oxide aerogel (FeOOH-GA) has been prepared for the assembly of an enzyme electrode. The α-FeOOH-reduced graphene oxide aerogel was characterized by X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The results reveal that graphene oxide is reduced by Fe2+ ion and α-FeOOH nanorods anchored on the reduced graphene oxide sheet through the Fe-O-C bond. Analyses using scanning electron microscopy and the Brunauer–Emmett–Teller method show that FeOOH-GA displays a various and interconnected pore structure. The FeOOH-GA was used as a support material on the glass carbon electrode (GCE) for glucose oxidase (GOD). Electrochemistry properties and bioelectrocatalytic activities of Nafion/GOD/FeOOH-GA/GCE were achieved from cyclic voltammetry and electrochemical impedance spectroscopy. The results show that Nafion/GOD/FeOOH-GA/GCE maintains outstanding catalytic activity and electrochemical properties. The FeOOH-GA could immobilize GOD through the hydrophobicity of the reduced graphene oxide and hydroxide radical of α-FeOOH. Appropriate α-FeOOH and diversified pore structure are beneficial for electron transfer, enzyme electrode storage, and interfacial electron transfer rate. All results indicated that the α-FeOOH-reduced graphene oxide aerogel as a carrier could effectively immobilize the tested enzyme.
- 21 August 2018
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 29 (20) , 17695-17705
In situ synthesis of sulfur-doped graphene quantum dots decorated carbon nanoparticles hybrid as metal-free electrocatalyst for oxygen reduction reaction
- 21 August 2018
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 29 (20) , 17695-17705
In situ synthesis of sulfur-doped graphene quantum dots decorated carbon nanoparticles hybrid as metal-free electrocatalyst for oxygen reduction reaction
- 31 January 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 53 (10) , 7691-7702
Cobalt nitride nanoparticle-modified nitrogen-doped graphene aerogel used as an efficient catalyst for oxygen reduction reaction in acidic medium
- 31 January 2018
- Published by Springer Nature in Journal of Materials Science
- Vol. 53 (10) , 7691-7702
Cobalt nitride nanoparticle-modified nitrogen-doped graphene aerogel used as an efficient catalyst for oxygen reduction reaction in acidic medium
- 28 May 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (48) , 25461-25469
Self-assembled peptide nanotubes as potential nanocarriers for drug delivery
The self-assembly of amphiphilic peptide I3K (Ac-I3K-NH2) and its potential application as a drug nanocarrier have been investigated. I3K monomers and nanotubular segments were initially the dominant species in aqueous solution and they gradually self-assembled into mature nanotubes with heights of approximately 12 nm and lengths of more than 1 μm. The encapsulation properties of the self-assembled peptide nanotubes were then investigated using model compound guests, including anionic hydrophilic methyl orange (MO) and hydrophobic oil red. It revealed that the model compounds could be efficiently encapsulated by I3K assemblies via electrostatic and hydrophobic interactions, respectively. Atomic force microscopy images demonstrated that variations in drug concentration did not significantly alter the structures of the peptide assemblies but could affect their sizes. Circular dichroism analyses indicated the predominance of β-sheet conformation associated with the self-assembled system regardless of drug concentrations. The in vitro releasing behavior of the encapsulated model drugs was also studied by the techniques of dialysis. The entrapped model drug MO exhibited an accelerated release as the solution pH was either decreased to 2.0–3.0 or increased to 10.0–11.0 but revealed a sustained release at physiological pH. These results demonstrated that these self-assembled peptide nanotubes could serve as potential drug nanocarriers with efficient encapsulation ability, and sustained and pH-responsive release properties.
- 28 May 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (48) , 25461-25469
Self-assembled peptide nanotubes as potential nanocarriers for drug delivery
The self-assembly of amphiphilic peptide I3K (Ac-I3K-NH2) and its potential application as a drug nanocarrier have been investigated. I3K monomers and nanotubular segments were initially the dominant species in aqueous solution and they gradually self-assembled into mature nanotubes with heights of approximately 12 nm and lengths of more than 1 μm. The encapsulation properties of the self-assembled peptide nanotubes were then investigated using model compound guests, including anionic hydrophilic methyl orange (MO) and hydrophobic oil red. It revealed that the model compounds could be efficiently encapsulated by I3K assemblies via electrostatic and hydrophobic interactions, respectively. Atomic force microscopy images demonstrated that variations in drug concentration did not significantly alter the structures of the peptide assemblies but could affect their sizes. Circular dichroism analyses indicated the predominance of β-sheet conformation associated with the self-assembled system regardless of drug concentrations. The in vitro releasing behavior of the encapsulated model drugs was also studied by the techniques of dialysis. The entrapped model drug MO exhibited an accelerated release as the solution pH was either decreased to 2.0–3.0 or increased to 10.0–11.0 but revealed a sustained release at physiological pH. These results demonstrated that these self-assembled peptide nanotubes could serve as potential drug nanocarriers with efficient encapsulation ability, and sustained and pH-responsive release properties.
- 1 November 2013
- Published by Elsevier in Electrochimica Acta
- Vol. 111, 275-283
Preparation and charaterization of Pt/functionalized graphene and its electrocatalysis for methanol oxidation
- 1 November 2013
- Published by Elsevier in Electrochimica Acta
- Vol. 111, 275-283
Preparation and charaterization of Pt/functionalized graphene and its electrocatalysis for methanol oxidation
- 20 December 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3 (8) , 2784-2793
Controlled biosilification using self-assembled short peptides A6K and V6K
We report the molecular self-assembly of two amphiphilic peptides (A6K and V6K) and the application of their self-assemblies as organic templates to direct biosilica formation. Under ambient conditions, A6K self-assembled into nanotubes 2.7 nm tall and approximately 1 μm to 2 μm long. In contrast, V6K self-assembled into lamellar-stack nanostructures approximately 4 nm tall and under 100 nm long. The self-assembled peptide nanostructures were used as organic templates to direct biosilica formation. Comparing with the self-assembled structures formed by the peptide/anions system, novel silica morphologies can be obtained by changing the peptide composition, using different anions, and applying electrostatic/flow fields. We observed that the presence of anions is important but not enough to produce ordered silica structures with novel morphologies. This study provides further understanding of silica biomineralization tailored by assembled peptides, which offers a simple but efficient method to control the formation of inorganic material.
- 20 December 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3 (8) , 2784-2793
Controlled biosilification using self-assembled short peptides A6K and V6K
We report the molecular self-assembly of two amphiphilic peptides (A6K and V6K) and the application of their self-assemblies as organic templates to direct biosilica formation. Under ambient conditions, A6K self-assembled into nanotubes 2.7 nm tall and approximately 1 μm to 2 μm long. In contrast, V6K self-assembled into lamellar-stack nanostructures approximately 4 nm tall and under 100 nm long. The self-assembled peptide nanostructures were used as organic templates to direct biosilica formation. Comparing with the self-assembled structures formed by the peptide/anions system, novel silica morphologies can be obtained by changing the peptide composition, using different anions, and applying electrostatic/flow fields. We observed that the presence of anions is important but not enough to produce ordered silica structures with novel morphologies. This study provides further understanding of silica biomineralization tailored by assembled peptides, which offers a simple but efficient method to control the formation of inorganic material.
- 29 November 2012
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 1 (4) , 1401-1406
A strategy for mass production of self-assembled nitrogen-doped graphene as catalytic materials
The mass production of graphene and nitrogen-doped (N-doped) graphene constitutes one of the main obstacles for the application of these materials. We demonstrate a novel resin-based methodology for large-scale self-assembly of the N-doped graphene. The N-doped graphene is readily obtained by using a precursor containing nitrogen and metal ions. The N-doped graphene is characterized by Raman, AFM, TEM, SEM, synchronic radiation and XPS measurements. The electrochemical performance of the catalyst made with such materials is investigated by a rotating ring-disk electrode (RRDE) system. The results reveal that the N-doped graphene is a selective catalyst and possesses an outstanding electrocatalytic activity, long-term stability, and good methanol and CO tolerance for oxygen reduction reaction (ORR).
- 29 November 2012
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 1 (4) , 1401-1406
A strategy for mass production of self-assembled nitrogen-doped graphene as catalytic materials
The mass production of graphene and nitrogen-doped (N-doped) graphene constitutes one of the main obstacles for the application of these materials. We demonstrate a novel resin-based methodology for large-scale self-assembly of the N-doped graphene. The N-doped graphene is readily obtained by using a precursor containing nitrogen and metal ions. The N-doped graphene is characterized by Raman, AFM, TEM, SEM, synchronic radiation and XPS measurements. The electrochemical performance of the catalyst made with such materials is investigated by a rotating ring-disk electrode (RRDE) system. The results reveal that the N-doped graphene is a selective catalyst and possesses an outstanding electrocatalytic activity, long-term stability, and good methanol and CO tolerance for oxygen reduction reaction (ORR).
- 6 August 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 2 (26) , 9887-9893
Biosilica structures with controllable morphology produced by an electrochemical process on indium tin oxide surfaces
In this paper, the formation of stable and continuous inorganic coating on indium tin oxide (ITO) via biosilica polymerization in the presence and absence of externally imposed electrostatic fields is described. The electrostatic fields exert a stronger influence on poly-L-lysines (PLLs) with a lower molecular weight than on larger ones. The larger peptides only enhance the density and uniformity of the biosilica deposition, whereas the overall biosilica morphology is observed to shift from sphere- to club-like structures when smaller PLLs are used. To explore the biosilica formation mechanism under precisely controlled electrostatic fields, scanning electron microscopy, circular dichroism, and atomic force microscopy were used to investigate the process of polypeptide tailored silica precipitation. Our results indicated that electric fields result in a high concentration of polypeptide near the ITO surfaces, which can be used as organic templates and basic building blocks to provide opportunities for tailoring material morphologies.
- 6 August 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 2 (26) , 9887-9893
Biosilica structures with controllable morphology produced by an electrochemical process on indium tin oxide surfaces
In this paper, the formation of stable and continuous inorganic coating on indium tin oxide (ITO) via biosilica polymerization in the presence and absence of externally imposed electrostatic fields is described. The electrostatic fields exert a stronger influence on poly-L-lysines (PLLs) with a lower molecular weight than on larger ones. The larger peptides only enhance the density and uniformity of the biosilica deposition, whereas the overall biosilica morphology is observed to shift from sphere- to club-like structures when smaller PLLs are used. To explore the biosilica formation mechanism under precisely controlled electrostatic fields, scanning electron microscopy, circular dichroism, and atomic force microscopy were used to investigate the process of polypeptide tailored silica precipitation. Our results indicated that electric fields result in a high concentration of polypeptide near the ITO surfaces, which can be used as organic templates and basic building blocks to provide opportunities for tailoring material morphologies.
- 21 March 2012
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 3 (5) , 1284-1290
Controlled biomimetic silica formation using star-shaped poly(l-lysine)
A novel star-shaped copolymer PEI10 000-g-PLL20, with a hyperbranched polyethylenimine (PEI) core and multiple linear poly(L-lysine) (PLL) peripheral chains was designed and synthesized. The star-shaped peptide, along with multiple counterions, was used as an organic template to direct the biomimetic synthesis of silica under mild conditions. Various biosilica morphologies, such as spherical, clubbed, and hexagonal shapes, were transformed using a specific TEOS/lysine residue ratio (δ) in a peptide/phosphate/silicic acid system. Individual silica spheres were obtained when δ was smaller than 10, whereas clubbed (δ = 11) and hexagonal (δ = 18) particles formed when δ was larger than 10. However, only clubbed biosilica was obtained when the counterions were carbonates or sulfates. Transmission electron microscopy and circular dichroism spectroscopy results suggest that the presence of counterions was necessary but not sufficient to produce ordered silica morphologies. Thus, the nature of peptide/anion complex, TEOS/lysine residue ratio, and pH changes in the biomimetic system played important roles in determining the silica morphologies.
- 21 March 2012
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 3 (5) , 1284-1290
Controlled biomimetic silica formation using star-shaped poly(l-lysine)
A novel star-shaped copolymer PEI10 000-g-PLL20, with a hyperbranched polyethylenimine (PEI) core and multiple linear poly(L-lysine) (PLL) peripheral chains was designed and synthesized. The star-shaped peptide, along with multiple counterions, was used as an organic template to direct the biomimetic synthesis of silica under mild conditions. Various biosilica morphologies, such as spherical, clubbed, and hexagonal shapes, were transformed using a specific TEOS/lysine residue ratio (δ) in a peptide/phosphate/silicic acid system. Individual silica spheres were obtained when δ was smaller than 10, whereas clubbed (δ = 11) and hexagonal (δ = 18) particles formed when δ was larger than 10. However, only clubbed biosilica was obtained when the counterions were carbonates or sulfates. Transmission electron microscopy and circular dichroism spectroscopy results suggest that the presence of counterions was necessary but not sufficient to produce ordered silica morphologies. Thus, the nature of peptide/anion complex, TEOS/lysine residue ratio, and pH changes in the biomimetic system played important roles in determining the silica morphologies.
- 22 February 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 2 (8) , 3288-3297
Biomimetic synthesis of silica hollow spheres using poly (l-lysine) and mechanism research
The biomimetic synthesis of silica hollow spheres induced by poly ( L-lysine) (PLL) under mild conditions is reported in this paper. A number of analytical techniques, such as scanning electron microscopy, energy dispersive spectroscopy, circular dichroism analysis, thermogravimetric analysis, fourier transform infrared spectroscopy, laser scanning confocal microscopy, and liquid atomic force microscopy, were used to investigate the synthesis and characterization of the materials. While the PLL peptide backbone interacted with the silicate species in the solution via electrostatic interactions and hydrogen bonding, the surfaces of PLL served as catalytic sites for the hydrolysis and condensation of tetraethoxysilane. The continuous process of biomineralization from nucleation to the formation of hollow spheres was observed, providing direct proof of biosilica in situ mineralization. A three-step mechanism was proposed. PLL directed the nucleation of the silica precursor and crystalline growth. Silica nanoparticles aggregated and self-assembled to form hollow spheres. The results obtained suggest that it is possible to control the synthesis of silica biomimetic materials under mild chemical and physical conditions.
- 22 February 2012
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 2 (8) , 3288-3297
Biomimetic synthesis of silica hollow spheres using poly (l-lysine) and mechanism research
The biomimetic synthesis of silica hollow spheres induced by poly ( L-lysine) (PLL) under mild conditions is reported in this paper. A number of analytical techniques, such as scanning electron microscopy, energy dispersive spectroscopy, circular dichroism analysis, thermogravimetric analysis, fourier transform infrared spectroscopy, laser scanning confocal microscopy, and liquid atomic force microscopy, were used to investigate the synthesis and characterization of the materials. While the PLL peptide backbone interacted with the silicate species in the solution via electrostatic interactions and hydrogen bonding, the surfaces of PLL served as catalytic sites for the hydrolysis and condensation of tetraethoxysilane. The continuous process of biomineralization from nucleation to the formation of hollow spheres was observed, providing direct proof of biosilica in situ mineralization. A three-step mechanism was proposed. PLL directed the nucleation of the silica precursor and crystalline growth. Silica nanoparticles aggregated and self-assembled to form hollow spheres. The results obtained suggest that it is possible to control the synthesis of silica biomimetic materials under mild chemical and physical conditions.