Takamasa Nonaka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Takamasa Nonaka has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Tomonari Ogata
Department of Applied Chemistry and Biochemistry , Graduate School of Science and Technology, Kumamoto University , Kumamoto, Japan
14 shared publications - Seiji Kurihara
Department of Applied Chemistry and Biochemistry, Graduate School of Science and Technology, Kumamoto University, Kumamoto, Japan
12 shared publications Masaki Moritsugu
Innovative Collaboration Organization, Kumamoto University , Kumamoto, Japan
4 shared publications- Osamu Sato
Institute for Materials Chemistry and Engineering and IRCCS, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
3 shared publications Seiji Kurihara
Department of Applied Chemistry and Biochemistry, Faculty of Engineering, Kumamoto University, Kurokami 2-39-1, Kumamoto-shi 860-8555, Japan
3 shared publications- Shoichi Kubo
Laboratory for Chemistry and Life Science, Institute of Integrated Research, Institute of Science Tokyo, Yokohama, Japan
3 shared publications
Latest Publications
- 10 November 2009
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 513 (1) , 79-88
Photoswitching Behavior of SiO 2 Inverse Opal Films Infiltrated with Azo-Tolane Copolymer: Effect of Polymer Main Chain Structure
Phototunable photonic band gap materials were prepared by infiltration of a liquid crystalline azopolymer into voids of a SiO2 inverse opal film. Linearly polarized light irradiation resulted in a reversible and stable shift of the reflection band to longer wavelength region due to the transformation of azobenzene groups from random to anisotropic molecular orientation. Acrylate and methacrylate copolymers having both azobenzene and tolane groups in side chain have been synthesized in order to improve switching property. Upon irradiation of linearly polarized light SiO2 inverse opal film infiltrated with methacrylate copolymer showed a larger wavelength shift of the reflection band compared to that of the composite film infiltrated with acrylate copolymer.
- 10 November 2009
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 513 (1) , 79-88
Photoswitching Behavior of SiO 2 Inverse Opal Films Infiltrated with Azo-Tolane Copolymer: Effect of Polymer Main Chain Structure
Phototunable photonic band gap materials were prepared by infiltration of a liquid crystalline azopolymer into voids of a SiO2 inverse opal film. Linearly polarized light irradiation resulted in a reversible and stable shift of the reflection band to longer wavelength region due to the transformation of azobenzene groups from random to anisotropic molecular orientation. Acrylate and methacrylate copolymers having both azobenzene and tolane groups in side chain have been synthesized in order to improve switching property. Upon irradiation of linearly polarized light SiO2 inverse opal film infiltrated with methacrylate copolymer showed a larger wavelength shift of the reflection band compared to that of the composite film infiltrated with acrylate copolymer.
- 25 February 2009
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 498 (1) , 40-48
Photo-Response Properties of Inverse Opal Infiltrated with Push-Pull Type Azobenzene Functionalized Polymer Liquid Crystals
Azo-containing polymers, poly(DR1Mc), poly(Dc2AzMc) and their copolymers, having push-pull type of azo-group were prepared and their photo-orientation behaviors were investigated. They were infiltrated into silica inverse opal, and reversible Bragg reflection shift was induced by irradiation of light in a range of 500 nm to 600 nm. With linearly polarized light irradiation, Bragg reflection of inverse opal was shifted to longer wavelength region, because azobenzene compounds oriented perpendicular to the axis of incident polarized light and the refractive index contrast was changed. On the other hand, with unpolarized light, Bragg reflection was shifted to shorter wavelength region. This blue shift was due to the molecular orientation preferring parallel to the incident light direction.
- 25 February 2009
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 498 (1) , 40-48
Photo-Response Properties of Inverse Opal Infiltrated with Push-Pull Type Azobenzene Functionalized Polymer Liquid Crystals
Azo-containing polymers, poly(DR1Mc), poly(Dc2AzMc) and their copolymers, having push-pull type of azo-group were prepared and their photo-orientation behaviors were investigated. They were infiltrated into silica inverse opal, and reversible Bragg reflection shift was induced by irradiation of light in a range of 500 nm to 600 nm. With linearly polarized light irradiation, Bragg reflection of inverse opal was shifted to longer wavelength region, because azobenzene compounds oriented perpendicular to the axis of incident polarized light and the refractive index contrast was changed. On the other hand, with unpolarized light, Bragg reflection was shifted to shorter wavelength region. This blue shift was due to the molecular orientation preferring parallel to the incident light direction.
- 28 August 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7050, 705014
Photoswitching properties of photonic band gap materials containing azo-polymer liquid crystal
Photochemically tunable photonic band gap materials were prepared by infiltration of liquid crystal polymers having azobenzene groups into voids of SiO2 inverse opal films. Linearly polarized light irradiation resulted in transformation from a random to an anisotropic molecular orientation of azobenzene side chains in the voids of the SiO2 inverse opal film, leading to the reversible and stable shift of the reflection band to longer wavelength more than 15 nm. In order to improve switching properties, we used copolymers with azobenzene monomer and tolane monomer, which indicate higher birefringence, as infiltration materials into the voids. The azo-tolane copolymers were found to show the higher birefringence than azobenzene homopolymers by the linearly polarized light irradiation. Thus, the reflection band of the SiO2 inverse opal film infiltrated with the azo-tolane copolymers was shifted to long wavelength region more than 55 nm by the irradiation of linearly polarized light.
- 28 August 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7050, 705014
Photoswitching properties of photonic band gap materials containing azo-polymer liquid crystal
Photochemically tunable photonic band gap materials were prepared by infiltration of liquid crystal polymers having azobenzene groups into voids of SiO2 inverse opal films. Linearly polarized light irradiation resulted in transformation from a random to an anisotropic molecular orientation of azobenzene side chains in the voids of the SiO2 inverse opal film, leading to the reversible and stable shift of the reflection band to longer wavelength more than 15 nm. In order to improve switching properties, we used copolymers with azobenzene monomer and tolane monomer, which indicate higher birefringence, as infiltration materials into the voids. The azo-tolane copolymers were found to show the higher birefringence than azobenzene homopolymers by the linearly polarized light irradiation. Thus, the reflection band of the SiO2 inverse opal film infiltrated with the azo-tolane copolymers was shifted to long wavelength region more than 55 nm by the irradiation of linearly polarized light.
- 1 November 2006
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 458 (1) , 173-179
Thermal and Photochemical Properties of Polyethylene Imines Having Azobenzene Side Chain Groups
Polyethylene imines (PEIs) having 4-butylazobenezene group through methylene spacer groups were prepared, and their thermal as well as photochemical properties was investigated. PEI104 having longer methylene spacer was found to form an out-of-plane structure by heating into an isotropic phase and following cooling. The photochemical control of the molecular orientation of PEI104 between in-plane and the out-of-plane structures could be achieved by combination of thermal and photochemical processes.
- 1 November 2006
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 458 (1) , 173-179
Thermal and Photochemical Properties of Polyethylene Imines Having Azobenzene Side Chain Groups
Polyethylene imines (PEIs) having 4-butylazobenezene group through methylene spacer groups were prepared, and their thermal as well as photochemical properties was investigated. PEI104 having longer methylene spacer was found to form an out-of-plane structure by heating into an isotropic phase and following cooling. The photochemical control of the molecular orientation of PEI104 between in-plane and the out-of-plane structures could be achieved by combination of thermal and photochemical processes.
- 1 November 2006
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 458 (1) , 111-119
Phototunable Liquid Crystalline Photonic Band Gap Material
We fabricated phototunable photonic crystals by infiltrating an azobenzen liquid crystal polymer (PLC) into voids of an opal or an inverse opal film. Azochromophores of PLC could be oriented perpendicular to the polarization direction of incident light, causing a change in refractive index of the PLC domain. Consequently, photonic band gap could be reversibly shifted by using the photo-induced molecular orientation. In addition, the photonic band gap in the inverse opal film was sifted larger than that in opal.
- 1 November 2006
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 458 (1) , 111-119
Phototunable Liquid Crystalline Photonic Band Gap Material
We fabricated phototunable photonic crystals by infiltrating an azobenzen liquid crystal polymer (PLC) into voids of an opal or an inverse opal film. Azochromophores of PLC could be oriented perpendicular to the polarization direction of incident light, causing a change in refractive index of the PLC domain. Consequently, photonic band gap could be reversibly shifted by using the photo-induced molecular orientation. In addition, the photonic band gap in the inverse opal film was sifted larger than that in opal.
- 1 November 2006
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 458 (1) , 89-95
Studies on Effects of Compatibilizers in Over Coating Layer Materials for TFT Panels
Over coating layer (OCL) materials were prepared by mixing acrylate copolymer and epoxy compound. The shelf life of the OCL materials could be extended, because of suppression of the crosslinking reaction between the acrylic acid and epoxy groups during storage at room temperature. However, the microphase separation between the acrylate copolymer and the epoxy compound was caused during the post-baking process, leading to the formation of rough surface, and consequently decrease in the transparency. The compounds having longer alkyl chains and acid group such as palmitic acid and 2-ethylhexyl maleate were found to prevent the microphase separation.
- 1 November 2006
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 458 (1) , 89-95
Studies on Effects of Compatibilizers in Over Coating Layer Materials for TFT Panels
Over coating layer (OCL) materials were prepared by mixing acrylate copolymer and epoxy compound. The shelf life of the OCL materials could be extended, because of suppression of the crosslinking reaction between the acrylic acid and epoxy groups during storage at room temperature. However, the microphase separation between the acrylate copolymer and the epoxy compound was caused during the post-baking process, leading to the formation of rough surface, and consequently decrease in the transparency. The compounds having longer alkyl chains and acid group such as palmitic acid and 2-ethylhexyl maleate were found to prevent the microphase separation.
- 27 January 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 92 (1) , 116-125
Formation of thermosensitive water-soluble copolymers with phosphinic acid groups and the thermosensitivity of the copolymers and copolymer/metal complexes
- 27 January 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 92 (1) , 116-125
Formation of thermosensitive water-soluble copolymers with phosphinic acid groups and the thermosensitivity of the copolymers and copolymer/metal complexes
- 1 January 2004
- Published by The Adhesion Society of Japan in Journal of The Adhesion Society of Japan
- Vol. 40 (8) , 324-333
PreparationandTheirFunctionsofVinyipyridinium-A^-isopropylacrylamideCopolymersHavingVariousAlkylChains
- 1 January 2004
- Published by The Adhesion Society of Japan in Journal of The Adhesion Society of Japan
- Vol. 40 (8) , 324-333
PreparationandTheirFunctionsofVinyipyridinium-A^-isopropylacrylamideCopolymersHavingVariousAlkylChains