E. Bellingeri
Research Subjects
E. Bellingeri has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- D. Marré
CNR‐SPIN C.so F. M. Perrone, 24 Genova 16152 Italy
6 shared publications A. Gerbi
CNR-SPIN, Genoa, Italy
4 shared publications- Carlo Ferdeghini
CNR-SPIN, Genova, Italy
4 shared publications M. R. Cimberle
Dipartimento di Fisica, CNR-IMEM, Genoa, Italy
4 shared publicationsM. Tropeano
CNR-SPIN, Genoa, Italy
4 shared publications- Renato Buzio
CNR-SPIN Institute for Superconductors, Innovative Materials and Devices, Corso F.M. Perrone 24, 16152 Genova, Italy
4 shared publications
Latest Publications
- 20 August 2015
- Published by Wiley in Journal of Microscopy
- Vol. 260 (3) , 302-311
An automatic method for atom identification in scanning tunnelling microscopy images of Fe-chalcogenide superconductors
SummaryWe describe a computational approach for the automatic recognition and classification of atomic species in scanning tunnelling microscopy images. The approach is based on a pipeline of image processing methods in which the classification step is performed by means of a Fuzzy Clustering algorithm. As a representative example, we use the computational tool to characterize the nanoscale phase separation in thin films of the Fe‐chalcogenide superconductor FeSexTe1‐x, starting from synthetic data sets and experimental topographies. We quantify the stoichiometry fluctuations on length scales from tens to a few nanometres.Lay descriptionThis paper describes an automatic computational method for the localization and recognition of atoms in high‐resolution Scanning Tunnelling Microscopy images of crystal lattice surfaces, showing the coexistence of different atomic layers and species. The method is based on image processing, machine learning and pattern recognition techniques to identify the layer of interest, to characterize the basic crystal structure, to perform a tessellation of the image and, finally, to classify atomic species by means of clustering techniques. We use this computational tool to characterize the nanoscale phase separation in thin films of the Fe‐chalcogenide superconductors, starting from synthetic data sets and experimental topographies. As a result, we are able to quantify the stoichiometry fluctuations on length scales from tens to a few nanometres.
- 20 August 2015
- Published by Wiley in Journal of Microscopy
- Vol. 260 (3) , 302-311
An automatic method for atom identification in scanning tunnelling microscopy images of Fe-chalcogenide superconductors
SummaryWe describe a computational approach for the automatic recognition and classification of atomic species in scanning tunnelling microscopy images. The approach is based on a pipeline of image processing methods in which the classification step is performed by means of a Fuzzy Clustering algorithm. As a representative example, we use the computational tool to characterize the nanoscale phase separation in thin films of the Fe‐chalcogenide superconductor FeSexTe1‐x, starting from synthetic data sets and experimental topographies. We quantify the stoichiometry fluctuations on length scales from tens to a few nanometres.Lay descriptionThis paper describes an automatic computational method for the localization and recognition of atoms in high‐resolution Scanning Tunnelling Microscopy images of crystal lattice surfaces, showing the coexistence of different atomic layers and species. The method is based on image processing, machine learning and pattern recognition techniques to identify the layer of interest, to characterize the basic crystal structure, to perform a tessellation of the image and, finally, to classify atomic species by means of clustering techniques. We use this computational tool to characterize the nanoscale phase separation in thin films of the Fe‐chalcogenide superconductors, starting from synthetic data sets and experimental topographies. As a result, we are able to quantify the stoichiometry fluctuations on length scales from tens to a few nanometres.
- 5 October 2010
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 24 (1-2) , 35-41
Critical Temperature Enhancement by Biaxial Compressive Strain in FeSe0.5Te0.5 Thin Films
- 5 October 2010
- Published by Springer Nature in Journal of Superconductivity and Novel Magnetism
- Vol. 24 (1-2) , 35-41
Critical Temperature Enhancement by Biaxial Compressive Strain in FeSe0.5Te0.5 Thin Films
- 8 March 2010
- Published by AIP Publishing in Applied Physics Letters
- Vol. 96 (10) , 102512
T c = 21 K in epitaxial FeSe0.5Te0.5 thin films with biaxial compressive strain
Epitaxial FeSe0.5Te0.5 thin films with different thickness were grown by pulsed laser ablation deposition on different substrates. High purity phase and fully epitaxial growth were obtained. By varying the film thickness, superconducting transition temperatures up to 21 K were observed, significantly larger than the bulk value 16.2 K. Structural analyses indicated that the c-axis is smaller than the bulk value but it is almost independent of the film thickness and the a-axis changes significantly with the film thickness and is linearly related to the Tc. The latter result indicates the important role of the compressive strain in enhancing Tc. Tc is also related to both the Fe–(Se,Te) bond length and angle, suggesting the possibility of further enhancement.
- 8 March 2010
- Published by AIP Publishing in Applied Physics Letters
- Vol. 96 (10) , 102512
T c = 21 K in epitaxial FeSe0.5Te0.5 thin films with biaxial compressive strain
Epitaxial FeSe0.5Te0.5 thin films with different thickness were grown by pulsed laser ablation deposition on different substrates. High purity phase and fully epitaxial growth were obtained. By varying the film thickness, superconducting transition temperatures up to 21 K were observed, significantly larger than the bulk value 16.2 K. Structural analyses indicated that the c-axis is smaller than the bulk value but it is almost independent of the film thickness and the a-axis changes significantly with the film thickness and is linearly related to the Tc. The latter result indicates the important role of the compressive strain in enhancing Tc. Tc is also related to both the Fe–(Se,Te) bond length and angle, suggesting the possibility of further enhancement.
- Open Access
Tc=21K in epitaxial FeSe0.5Te0.5 thin films with biaxial compressive strain
High purity epitaxial FeSe0.5Te0.5 thin films with different thickness were grown by Pulsed Laser Ablation on different substrates. By varying the film thickness, Tc up to 21K were observed, significantly larger than the bulk value. Structural analyses indicated that the a axis changes significantly with the film thickness and is linearly related to the Tc. The latter result indicates the important role of the compressive strain in enhancing Tc. Tc is also related to both the Fe-(Se,Te) bond length and angle, suggesting the possibility of further enhancement.
Open AccessTc=21K in epitaxial FeSe0.5Te0.5 thin films with biaxial compressive strain
High purity epitaxial FeSe0.5Te0.5 thin films with different thickness were grown by Pulsed Laser Ablation on different substrates. By varying the film thickness, Tc up to 21K were observed, significantly larger than the bulk value. Structural analyses indicated that the a axis changes significantly with the film thickness and is linearly related to the Tc. The latter result indicates the important role of the compressive strain in enhancing Tc. Tc is also related to both the Fe-(Se,Te) bond length and angle, suggesting the possibility of further enhancement.
- Open Access
- 30 September 2009
- Published by Elsevier in Procedia Chemistry
- Vol. 1 (1) , 839-842
All-Oxide Crystalline Microelectromechanical systems
- 30 September 2009
- Published by Elsevier in Procedia Chemistry
- Vol. 1 (1) , 839-842
Open AccessAll-Oxide Crystalline Microelectromechanical systems
- Open Access
High quality epitaxial FeSe0.5Te0.5 thin films grown on SrTiO3 substrates by pulsed laser deposition
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental techniques: X-rays diffraction, reflection high energy electron diffraction, scanning tunnelling microscopy and atomic force microscopy. The substrate temperature during the deposition was found to be the main parameter governing sample morphology and superconducting critical temperature. Films obtained in the optimal conditions show an epitaxial growth with c axis perpendicular to the film surface and the a and b axis parallel to the substrates one, without the evidence of any other orientation. Moreover, such films show a metallic behavior over the whole measured temperature range and critical temperature above 17K, which is higher than the target one.
Open AccessHigh quality epitaxial FeSe0.5Te0.5 thin films grown on SrTiO3 substrates by pulsed laser deposition
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental techniques: X-rays diffraction, reflection high energy electron diffraction, scanning tunnelling microscopy and atomic force microscopy. The substrate temperature during the deposition was found to be the main parameter governing sample morphology and superconducting critical temperature. Films obtained in the optimal conditions show an epitaxial growth with c axis perpendicular to the film surface and the a and b axis parallel to the substrates one, without the evidence of any other orientation. Moreover, such films show a metallic behavior over the whole measured temperature range and critical temperature above 17K, which is higher than the target one.
- 4 January 2005
- Published by American Physical Society (APS) in Physical Review B
- Vol. 71 (1) , 014406
Effects of electric and magnetic fields on phase-separatedthin filmsWe perform field-effect experiments on side-gate devices made of underdoped epitaxial thin films. The resistance modulation is small due to the high carrier concentration in this compound; however, it is significantly enhanced by an external magnetic field. We discuss our results in the framework of a double-exchange mechanism and phase separation and suggest that our experimental data together with other complementary data of the literature are a straightforward consequence of the percolative nature of transport in the phase-separation regime of manganites. We demonstrate the possibility of driving the percolation process by field effect.- 4 January 2005
- Published by American Physical Society (APS) in Physical Review B
- Vol. 71 (1) , 014406
Effects of electric and magnetic fields on phase-separatedthin filmsWe perform field-effect experiments on side-gate devices made of underdoped epitaxial thin films. The resistance modulation is small due to the high carrier concentration in this compound; however, it is significantly enhanced by an external magnetic field. We discuss our results in the framework of a double-exchange mechanism and phase separation and suggest that our experimental data together with other complementary data of the literature are a straightforward consequence of the percolative nature of transport in the phase-separation regime of manganites. We demonstrate the possibility of driving the percolation process by field effect.- 24 November 2003
- Published by AIP Publishing in Applied Physics Letters
- Vol. 83 (21) , 4435-4437
Reversible shift of the transition temperature of manganites in planar field-effect devices patterned by atomic force microscope
A planar side-gate device for field effect with a La 0.67 Ba 0.33 MnO 3 channel on a SrTiO 3 substrate is fabricated by means of the voltage-biased tip of an atomic force microscope. The peculiar geometry and the high dielectricpermittivity of the substrate enhance the channel resistance modulation up to 20% at low temperature by a gate voltage of ±40 V. Moreover, a reversible shift by 1.3 K of the metal–insulator transition temperature (T MI ) by field effect is observed. The signs of the changes of resistance and T MI both depend on the sign of the gate voltage, as expected for pure field effect; in particular, the T MI is raised (lowered) by accumulating (depleting) holes in the channel.
- 24 November 2003
- Published by AIP Publishing in Applied Physics Letters
- Vol. 83 (21) , 4435-4437
Reversible shift of the transition temperature of manganites in planar field-effect devices patterned by atomic force microscope
A planar side-gate device for field effect with a La 0.67 Ba 0.33 MnO 3 channel on a SrTiO 3 substrate is fabricated by means of the voltage-biased tip of an atomic force microscope. The peculiar geometry and the high dielectricpermittivity of the substrate enhance the channel resistance modulation up to 20% at low temperature by a gate voltage of ±40 V. Moreover, a reversible shift by 1.3 K of the metal–insulator transition temperature (T MI ) by field effect is observed. The signs of the changes of resistance and T MI both depend on the sign of the gate voltage, as expected for pure field effect; in particular, the T MI is raised (lowered) by accumulating (depleting) holes in the channel.