Jin Chul Jung
Research Subjects
Jin Chul Jung has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Jun Ho Chi
PC Group, Chemical R&D Center, Cheil Industries Inc., Gocheon-dong, Uiwang-Si, Gyeonggi-Do, 437–711, Korea
4 shared publicationsGyo Jic Shin
Department of Materials Science and Engineering, Polymer Research Institute, Pohang University of Science and Technology (POSTECH), San 31, Hyoja-dong, Pohang 790-784, Korea
3 shared publicationsChang-Lyoul Lee
Optoelectronics Group, Cavendish Laboratory, Cambridge University, United Kingdom
2 shared publications- Jang-Joo Kim
Seoul National University
2 shared publications Jong Kwan Im
Polymer Research Institute/Department of Materials Science and Engineering, Pohang University of Science and Technology, San 31, Hyoja‐dong, Pohang, Kyungbuk, 790‐784, Korea
2 shared publicationsKyung Ho Choi
Polymer Research Institute (PRI), Center for Advanced Functional Polymers, Department of Materials Science & Engineering, Pohang University of Science & Technology (POSTECH) San31, Hyoja‐dong, Pohang, 790‐784, South Korea
2 shared publications
Latest Publications
- 18 January 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 108 (2) , 914-922
Synthesis and light-emitting properties of a novel π-conjugated poly[di(p-phenyleneethynylene)-alt- (p-phenylenecyanovinylene)] containingn-octyloxy side branches
- 18 January 2008
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 108 (2) , 914-922
Synthesis and light-emitting properties of a novel π-conjugated poly[di(p-phenyleneethynylene)-alt- (p-phenylenecyanovinylene)] containingn-octyloxy side branches
- 4 September 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 106 (6) , 3823-3832
Synthesis of new alicyclic polyimides by Diels‐Alder polymerization
Four new alicyclic poly{arylene‐9,10‐di[4‐(methyloxy)phenyloxy]‐1,2,3,4,5,6,7,8‐octahydroanthracene‐2,3,6,7‐tetracarboxdiimide}s (APIs) were prepared at 80°C in the presence of NaI in DMSO by the in situ Diels‐Alder polymerization of 1,4‐bis[4‐(methyloxy)phenyloxy]‐2,3,6,7‐tetrakis(bromomethyl)benzene (MPBB) with four arylenebismaleimides (AMIs). The stereochemical isomerisms measured for the model compound DPAI and MDA‐PI by HETCOR spectroscopy and 1H‐NMR spectroscopy, respectively, revealed that DPAI and APIs presumably have only one trans‐bis‐endo‐configuration. Inherent viscosities of APIs varied in the 0.20–0.41 dL/g range. Solubility tests revealed that in spite of the alicyclic units incorporated the APIs were only marginally soluble in polar organic solvents. In TGA in N2 the APIs began to decompose at temperatures higher than 380°C, revealing two‐step pyrolysis behavior. 4‐(Methyloxy)phenyloxy side groups were believed to degrade in the lower temperature range. In DSC and wide‐angle X‐ray diffractometry APIs all appeared completely amorphous and in UV‐Vis spectroscopy both DPAI and APIs were transparent at wavelengths longer than 375 nm. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007
- 4 September 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 106 (6) , 3823-3832
Synthesis of new alicyclic polyimides by Diels‐Alder polymerization
Four new alicyclic poly{arylene‐9,10‐di[4‐(methyloxy)phenyloxy]‐1,2,3,4,5,6,7,8‐octahydroanthracene‐2,3,6,7‐tetracarboxdiimide}s (APIs) were prepared at 80°C in the presence of NaI in DMSO by the in situ Diels‐Alder polymerization of 1,4‐bis[4‐(methyloxy)phenyloxy]‐2,3,6,7‐tetrakis(bromomethyl)benzene (MPBB) with four arylenebismaleimides (AMIs). The stereochemical isomerisms measured for the model compound DPAI and MDA‐PI by HETCOR spectroscopy and 1H‐NMR spectroscopy, respectively, revealed that DPAI and APIs presumably have only one trans‐bis‐endo‐configuration. Inherent viscosities of APIs varied in the 0.20–0.41 dL/g range. Solubility tests revealed that in spite of the alicyclic units incorporated the APIs were only marginally soluble in polar organic solvents. In TGA in N2 the APIs began to decompose at temperatures higher than 380°C, revealing two‐step pyrolysis behavior. 4‐(Methyloxy)phenyloxy side groups were believed to degrade in the lower temperature range. In DSC and wide‐angle X‐ray diffractometry APIs all appeared completely amorphous and in UV‐Vis spectroscopy both DPAI and APIs were transparent at wavelengths longer than 375 nm. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007
- 9 July 2007
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 292 (7) , 844-854
Synthesis and Light-Emitting Properties of New Polyimides Containing Ethynylene Units in the Main Chain
- 9 July 2007
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 292 (7) , 844-854
Synthesis and Light-Emitting Properties of New Polyimides Containing Ethynylene Units in the Main Chain
- 26 April 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 105 (4) , 1793-1801
Synthesis and liquid-crystal-aligning properties of novel aromatic poly(amide imide)s bearingn-alkyloxy side chains
- 26 April 2007
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 105 (4) , 1793-1801
Synthesis and liquid-crystal-aligning properties of novel aromatic poly(amide imide)s bearingn-alkyloxy side chains
- 5 January 2007
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 45 (5) , 776-788
Synthesis and micropatterning properties of a novel base‐soluble, positive‐working, photosensitive polyimide having an o‐nitrobenzyl ether group
A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et3N. The DHBA monomer was synthesized by exhaustive KMnO4 oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from 1H NMR absorption of benzylic CH2 protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm2 when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007
- 5 January 2007
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 45 (5) , 776-788
Synthesis and micropatterning properties of a novel base‐soluble, positive‐working, photosensitive polyimide having an o‐nitrobenzyl ether group
A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et3N. The DHBA monomer was synthesized by exhaustive KMnO4 oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from 1H NMR absorption of benzylic CH2 protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm2 when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007
- 23 June 2006
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 17 (6) , 444-452
Synthesis, characterization and liquid crystal‐aligning properties of new poly{3‐[4‐(n‐alkyloxy)phenyloxy]pyromellitimide}s
- 23 June 2006
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 17 (6) , 444-452
Synthesis, characterization and liquid crystal‐aligning properties of new poly{3‐[4‐(n‐alkyloxy)phenyloxy]pyromellitimide}s
- 15 March 2005
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 16 (5) , 387-392
New base-soluble positive-working photosensitive polyimides havingo-nitrobenzyl ester group
- 15 March 2005
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 16 (5) , 387-392
New base-soluble positive-working photosensitive polyimides havingo-nitrobenzyl ester group
- 3 August 2004
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 289 (8) , 737-742
Synthesis and Characterization of New Aromatic Polyamides withN,N′-Di(4-n-alkylphenyl)benzodiimide Unit on the Main Chain
- 3 August 2004
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 289 (8) , 737-742
Synthesis and Characterization of New Aromatic Polyamides withN,N′-Di(4-n-alkylphenyl)benzodiimide Unit on the Main Chain
- 19 May 2004
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 42 (13) , 3130-3142
Synthesis of novel polypyromellitimides with n‐alkyloxy side chains and their liquid‐crystal aligning property
New well‐defined brush polypyromellitimides with n‐octyloxy and n‐dodecyloxy side chains were prepared by two‐step polycondensations of 3,6‐di(n‐alkyloxy)pyromellitic dianhydrides with various conventional aromatic diamines. Their structures and properties were investigated and compared with those of polyimides without the side chains. The alkyloxylated poly(amic acid)s had inherent viscosities of 0.45–1.09 dL/g. The polyimides showed enhanced solubility in organic solvents and had layered structures in the solid state. As the side‐chain length increased from n‐octyloxy to n‐dodecyloxy, the extent of layered structure formation increased, whereas the glass‐transition temperature and thermal resistance decreased. As for the liquid‐crystal (LC) aligning ability measured with 4‐n‐pentyl‐4′‐cyanobiphenyl on rubbed thin‐film surfaces, all the side‐chain polyimides revealed homogeneous LC alignment parallel to the rubbing direction with distinctively higher pretilt angles than those of the polyimides without the side chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3130–3142, 2004
- 19 May 2004
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 42 (13) , 3130-3142
Synthesis of novel polypyromellitimides with n‐alkyloxy side chains and their liquid‐crystal aligning property
New well‐defined brush polypyromellitimides with n‐octyloxy and n‐dodecyloxy side chains were prepared by two‐step polycondensations of 3,6‐di(n‐alkyloxy)pyromellitic dianhydrides with various conventional aromatic diamines. Their structures and properties were investigated and compared with those of polyimides without the side chains. The alkyloxylated poly(amic acid)s had inherent viscosities of 0.45–1.09 dL/g. The polyimides showed enhanced solubility in organic solvents and had layered structures in the solid state. As the side‐chain length increased from n‐octyloxy to n‐dodecyloxy, the extent of layered structure formation increased, whereas the glass‐transition temperature and thermal resistance decreased. As for the liquid‐crystal (LC) aligning ability measured with 4‐n‐pentyl‐4′‐cyanobiphenyl on rubbed thin‐film surfaces, all the side‐chain polyimides revealed homogeneous LC alignment parallel to the rubbing direction with distinctively higher pretilt angles than those of the polyimides without the side chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3130–3142, 2004
- 1 July 2003
- Published by Springer Nature in Polymer Bulletin
- Vol. 50 (5-6) , 311-318
Synthesis and properties of polyimides having alkyloxycarbonyl side chain
- 1 July 2003
- Published by Springer Nature in Polymer Bulletin
- Vol. 50 (5-6) , 311-318
Synthesis and properties of polyimides having alkyloxycarbonyl side chain