JKJavad Khazaei

Javad Khazaei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Javad Khazaei has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determination of Physical Properties, Moisture Absorption Process and Aerodynamic Properties of Grain and Cluster Straw of Two Wheat Cultivars

    by Mohammad Jafari, Gholam Reza Chegini, Javad Khazaei

    Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, the scientific journal of the Mendel University in Brno, Czech Republic


  • SEPARATING SUNFLOWER SEEDS OUT FROM RECEPTACLES BY TWO AIR-JETS IN STATIC, LINEAR, AND ROTATIONAL MOVEMENT STATES

    by Amir Hossein Mirzabe, Gholam Reza Chegini, Jafar Massah, Javad Khazaei

    In order to eliminate some problems of traditional and mechanical methods of separating sunflower seeds from the receptacles, a new method based on impingement jets was innovated. The effect of the seeds' location, reservoir pressure, nozzle diameter, and the distance between the two nozzles on the separating area of sunflower receptacle, in three different states including, static, linear movement of sunflower receptacle, and rotational movement of nozzles were examined. Also theoretical areas of covered region by the two nozzles in the three different states were calculated. The regions separated by impingement of the air-jet were photographed and the area of the separated regions was calculated based on image processing technique. Also, for the three states, power consumption of compressor was calculated. Moreover, in each state, response surface methodology was used to find the five best optimized points. In the static state, maximum and minimum values of area of separated regions in the central, middle, and side region of sunflower receptacle were equal to 2.63 and 1.39, 3.83 and 1.96, and 4.02 and 2.12 cm2, respectively. In the linear movement state, maximum and minimum values of area of separated regions in the central, middle, and side region of sunflower receptacle were equal to 9.78 and 5.72, 16.19 and 10.02, and 17.43 and 11.15 cm2, respectively. The corresponding values for rotational movement state were 9.33 and 5.14, 128.98 and 86.12, and 241.89 and 157.65 cm2, respectively. Obtained results by variance analyzing showed that in all three states and in each region, effects of independent input factors were significant at probability level of 1%. Also in all tests, no seed was observed to be damaged due to air-jet impinging.

  • ARTIFICIAL NEURAL NETWORK AND RESPONSE SURFACE METHODOLOGY APPROACHES FOR OPTIMIZATION OF PARAMETERS FOR AN AIR-JET SUNFLOWER SEEDS REMOVER MACHINE

    by Amir Hossein Mirzabe, Gholam Reza Chegini, Jafar Massah, Ali Mansouri, Javad Khazaei

    An impingement jet method was employed for extracting of sunflower seeds from sunflower heads (SHs). The method was based on holding SHs with a rotating plate and extracting the sunflower seeds with the help of pressurized air-jets. Artificial neural networks (ANNs) and response surface methodology (RSM) were used to model the effects of operational parameters of impingement air-jet on performance of preliminary model of the remover machine. The operational parameters were diameter of nozzle (ND), angle of impingement (AI), distance between nozzle outlet and sunflower head (DBNS), air pressure (AP) and rotational velocity of sunflower head (RV). The final ANN model, 3-5-1, successfully modeled the relationship between three operational parameters, ND, AI and RV with removing performance of machine (RPAJSSR) with R2of 0.98 and T value of 0.96. The RSM method was applied for three different locations of SHs at the optimum AP of 7 bar. The maximum value of RPAJSSR, (57%) was obtained for ND of 8 mm, AI of 30°, DBNS of 20 mm and RV of 10 rpm at side region of SH (SRSH). Also, the minimum value (4.49%) belonged to ND of 4 mm, AI of 30°, DBNS of 20 mm and RV of 15 rpm for central region of SH (CRSH).

  • Open Access

    Selected Mechanical Properties of Pomegranate Peel and Fruit

    by Nader Ekrami-Rad, Javad Khazaei, Mohammad-Hadi Khoshtaghaza

    Mechanical property data of pomegranate fruits are limited. The objective of this study was to determine the compression and cutting properties of whole fruit as well as the puncture strength of peel samples of fruit at different storage times. The results showed that storage time had a significant effect on all the properties studied in this work except for peel shear strain (p < 0.05). The whole fruit cutting energy and power, maximum cutting force, peel shear strength and strain and shear modulus showed an increasing trend with storage time. However, firmness, bioyield force, and modulus of elasticity increased and then decreased with storage time.


  • Yield Estimation and Clustering of Chickpea Genotypes Using Soft Computing Techniques

    by J. Khazaei, M.R. Naghavi, M.R. Jahansouz, G. Salimi‐Khorshidi

    Crop growth is a multifactorial nonlinear process and different kinds of models have been developed to predict crop yield. In recent years, crop growth models have become increasingly important as major components of agriculture‐related decision‐support systems. Moreover, clustering is a multivariate analysis technique widely adopted in agricultural studies. Using this method, different genotypes (accessions) of crops can be classified and characterized. This paper discusses the use of soft computing techniques such as artificial neural networks (ANN) and fuzzy logic based approaches in regression and clustering problems. The ANN technology was used for modeling the correlation between crop yield and 10 yield components of chickpea (Cicer arietinum L.). Also, the fuzzy c‐means (FCM) clustering technique was used for the classification of 362 chickpea genotypes based on their agronomic and morphological traits. The ANN performed very well. Among the various ANN structures, a model of good performance was produced by 10–14–3–1 structure with a training algorithm of back‐propagation and hyperbolic tangent transfer function in the hidden and output layers. The model was able to predict the chickpea yield data of 0.32 to 14.38 g plant−1 with a RMSE and T value of 0.0195 g plant−1 and 0.988, respectively. T statistics measures the scattering around line (1:1). When T is close to 1.0, the fitting is desirable. The mean absolute error, relative error, and coefficient of determination between actual and predicted data were 0.0109 g plant−1, −1.07%, and 0.991, respectively. The ANN model predicted 90.3% of the yield data with relative errors ranging between ±5%. The consequent reduction in the number of training data from 250 to 50, decreased the training RMSE, but increased the prediction error. It was found that even with a few number of patterns in the training dataset (50 patterns), the prediction error of the ANN model was in the range of acceptance for yield modeling. Obviously, with 25 × 103 iterations, the ANN models with 5 and 10 input variables gave almost the same estimation of the chickpea yield. The results of clustering showed that the FCM clustering technique can be successfully applied to classify chickpea genotypes in terms of agronomic and morphological traits.


  • Evaluation and Modeling of Physical and Physiological Damage to Wheat Seeds under Successive Impact Loadings: Mathematical and Neural Networks Modeling

    by Javad Khazaei, Feizollah Shahbazi, Jafar Massah, Mehdi Nikravesh, Mohammad H. Kianmehr

    Threshing wheat (Triticum aestivum L.) at high speeds is the main reason behind abnormal seedlings and vigor reduction of the seeds. This problem is expected to be severe in head‐stripper combines with successive impact loadings of stripping and threshing units. The aim of this study was to simulate the effects of impact velocities (IV), number of impact loadings (NL), and seed moisture content (MC) on percentage of physical damage (PPD) and percentage of loss in germination (PLG) to wheat seeds. Modeling the correlation between dependent and independent variables was performed using mathematical and artificial neural networks (ANN). The result showed that all the three independent variables significantly influenced PPD and PLG (P = 0.01). Increasing the IV from 5 to 30 m s−1 caused an increase in PPD and PLG from 0.17 to 35.8% and from 0.37 to 19.9%, respectively. It was found that the seeds with higher MC could better withstand physical and physiological damage than those with lower MC. With an increase in NL from 1 to 3 times, the mean values of PPD and PLG were increased by 2.9 and 2.6 times, respectively. An ANN model with two hidden layers, trained with a back‐propagation algorithm, successfully learned the relationship between the input and output variables. In comparison with regression models, ANN performed better when predicting PPD and PLG to wheat seeds.


  • A Novel Alternative Method for Modeling the Effects of Air Temperature and Slice Thickness on Quality and Drying Kinetics of Tomato Slices: Superposition Technique

    by Javad Khazaei, Gholam-Reza Chegini, Maryam Bakhshiani

    The effect of air temperature (AT) and slice thickness (ST) on the quality and drying kinetics of tomato slices were studied. The drying period of tomato slices to reach the moisture content of 15% (wb) ranged from 2.6 to 18.7 h. The water diffusivity, activation energy, and resistance to diffusion ranged from 1.4 × 10−10 to 2.8 × 10−9 m2/s, 21.25 to 23.4 kJ/mol, and from 939 to 4590 m2 s/kg, respectively. Drying had a significant effect on ascorbic acid, soluble solid, acidity, and pH (P = 0.01). The ascorbic acid degradation was greatly influenced by ST. The results show that time-temperature superposition technique (TTST) was very efficient in the modeling of the drying process. The proposed TTST provides a novel alternative in curve-fitting exercise of drying data. Neural networks also showed favorable performance in estimating the drying functions.