JBJohann Borenstein

Johann Borenstein

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Johann Borenstein has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • TelOpTrak: Heuristics-enhanced Indoor Location Tracking for Tele-operated Robots

    by Johann Borenstein, Russ Miller, Adam Borrell

    With most tele-operated robots the operator's only feedback is the view from an onboard camera. Live video lets the operator observe the robot's immediate surroundings but does not establish the orientation or whereabouts of the robot in its environment. An additional plot of the robot's trajectory would be helpful for the operator and is sometimes provided, based on GPS. However, indoors where GPS is unavailable, tracking has to rely on dead-reckoning, which is too inaccurate to be useful. Our proposed TelOpTrak method corrects dead-reckoning errors even when only odometry and a low-cost (and thus, high-drift) MEMS-class gyro are available on the robot. TelOpTrak corrects gyro drift by exploiting the structured nature of most buildings, but without having to directly sense building features. This paper explains the TelOpTrak method and provides comprehensive experimental results. Earlier versions of this paper (Borenstein et al., 2010a), (Borenstein et al., 2010b) were presented at two conferences. The main difference between the earlier conference papers and the present manuscript is that the latter is more comprehensive, more up-to-date, and it presents an entirely new set of experimental results, including results of a live demonstration at the 2010 Robotics Rodeo event at Ft. Benning, USA.


  • Heuristic Drift Elimination for Personnel Tracking Systems

    by Johann Borenstein, Lauro Ojeda

    This paper pertains to the reduction of the effects of measurement errors in rate gyros used for tracking, recording, or monitoring the position of persons walking indoors. In such applications, bias drift and other gyro errors can degrade accuracy within minutes. To overcome this problem we developed the Heuristic Drift Elimination (HDE) method, that effectively corrects bias drift and other slow-changing errors. HDE works by making assumptions about walking in structured, indoor environments. The paper explains the heuristic assumptions and the HDE method, and shows experimental results. In typical applications, HDE maintains near-zero heading errors in walks of unlimited duration.


  • Heuristic Reduction of Gyro Drift for Personnel Tracking Systems

    by Johann Borenstein, Lauro Ojeda, Surat Kwanmuang

    The paper pertains to the reduction of measurement errors in gyroscopes used for tracking the position of walking persons. Such tracking systems commonly use inertial or other means to measure distance travelled, and one or more gyros to measure changes in heading. MEMS-type gyros or IMUs are best suited for this task because of their small size and low weight. However, these gyros have large drift rates and can be sensitive to accelerations. The Heuristic Drift Reduction (HDR) method presented in this paper estimates the drift component and eliminates it, reducing heading errors by almost one order of magnitude.


  • Personal Dead-reckoning System for GPS-denied Environments

    by Lauro Ojeda, Johann Borenstein

    This paper introduces a positioning system for walking persons, called "Personal Dead-reckoning" (PDR) system. The PDR system does not require GPS, beacons, or landmarks. The system is therefore useful in GPS-denied environments, such as inside buildings, tunnels, or dense forests. Potential users of the system are military and security personnel as well as emergency responders. The PDR system uses a 6-DOF inertial measurement unit (IMU) attached to the user's boot. The IMU provides rate-of-rotation and acceleration measurements that are used in real-time to estimate the location of the user relative to a known starting point. In order to reduce the most significant errors of this IMU-based system-caused by the bias drift of the accelerometers-we implemented a technique known as "Zero Velocity Update" (ZUPT). With the ZUPT technique and related signal processing algorithms, typical errors of our system are about 2% of distance traveled for short walks. This typical PDR system error is largely independent of the gait or speed of the user. When walking continuously for several minutes, the error increases gradually beyond 2%. The PDR system works in both 2-dimensional (2-D) and 3-D environments, although errors in Z-direction are usually larger than 2% of distance traveled. Earlier versions of our system used an unpractically large IMU. In the most recent version we implemented a much smaller IMU. This paper discussed specific problems of this small IMU, our measures for eliminating these problems, and our first experimental results with the small IMU under different conditions.


  • The OmniTread OT‐4 serpentine robot—design and performance

    by Johann Borenstein, Malik Hansen, Adam Borrell

    Serpentine robots are slender, multi‐segmented vehicles designed to provide greater mobility than conventional mobile robots. Serpentine robots are ideally suited for urban search and rescue, military intelligence gathering, and inspection tasks in hazardous or inaccessible environments. One such serpentine robot, developed at the University of Michigan, is the “OmniTread OT‐4.” The OT‐4 comprises seven segments, which are linked to each other by six joints. The OT‐4 can climb over obstacles that are much higher than the robot itself, propel itself inside pipes of different diameters, and traverse difficult terrain, such as rocks or the rubble of a collapsed structure. The foremost and unique design characteristic of the OT‐4 is the use of pneumatic bellows to actuate the joints. The pneumatic bellows allow the simultaneous control of position and stiffness for each joint. Controllable stiffness is important in serpentine robots, which require stiff joints to cross gaps and compliant joints to conform to rough terrain for effective propulsion. Another unique feature of the OmniTread design is the coverage of all four sides of each segment with drive tracks. This design makes the robot indifferent to rollovers, which are bound to happen when the slender bodies of serpentine robots travel over rugged terrain. This paper describes the OmniTread concept and some of its technical features in some detail. In the Experiment Results Section, photographs of successful obstacle traverses illustrate the abilities of the OT‐4.


  • Development of Control for a Serpentine Robot

    by William R. Hutchison, Betsy J. Constantine, Johann Borenstein, Jerry Pratt

    This paper describes the development and testing of control of the OmniTread OT-4 robot by the seventh generation (7G) control system. Control of OT-4 was developed in the Yobotics 3D simulator by an iterative process combining genetic algorithm, learning and analytic programming techniques. The control system developed in simulation was tested by controlling the real OT-4 robot in the laboratory. The performance of the real OT-4 robot under 7G control on stairs, parallel bars, a slalom course, and stairs with obstacles corresponded well to the simulated performance on which development of the control system was based.


  • Non-GPS Navigation for Security Personnel and First Responders

    by Lauro Ojeda, Johann Borenstein

    This paper introduces a “Personal Dead-reckoning” (PDR) navigation system for walking persons. The system is useful for monitoring the position of emergency responders inside buildings, where GPS is unavailable. The PDR system uses a six-axes Inertial Measurement Unit attached to the user's boot. The system's strength lies in the use of a technique known as Zero Velocity Update (ZUPT) that virtually eliminates the ill-effects of drift in the accelerometers. It works very well with different gaits, as well as on stairs, slopes, and generally on 3-dimensional terrain. The paper explains the PDR and presents extensive experimental results, which illustrate the utility and practicality of the system. Parts of this paper were presented at the 2006 International Joint Topical Meeting: “Sharing Solutions for Emergencies and Hazardous Environments,” February 12–15, 2006, Salt Lake City, Utah, USA.


  • Terrain characterization and classification with a mobile robot

    by Lauro Ojeda, Johann Borenstein, Gary Witus, Robert Karlsen

    This paper introduces novel methods for terrain classification and characterization with a mobile robot. In the context of this paper,terrain classificationaims at associating terrains with one of a few predefined, commonly known categories, such as gravel, sand, or asphalt.Terrain characterization, on the other hand, aims at determining key parameters of the terrain that affect its ability to support vehicular traffic. Such properties are collectively called “trafficability.” The proposed terrain classification and characterization system comprises a skid‐steer mobile robot, as well as some common and some uncommon but optional onboard sensors. Using these components, our system can characterize and classify terrain in real time and during the robot's actual mission. The paper presents experimental results for both the terrain classification and characterization methods. The methods proposed in this paper can likely also be implemented on tracked robots, although we did not test this option in our work.