Fabien Jousse
Research Subjects
Fabien Jousse has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
T. Jongen
2 shared publicationsW. Agterof
2 shared publicationsA. Visser
1 shared publicationGuoping Lian
Unilever Corporate Research, Colworth House, Sharnbrook, Bedfordshire, UK
1 shared publicationJohn Melrose
Unilever Corporate Research, Colworth House, Sharnbrook, Bedfordshire, UK
1 shared publicationM. Koolschijn
1 shared publication
Latest Publications
- 30 January 2008
- Published by Wiley in Comprehensive Reviews in Food Science and Food Safety
- Vol. 7 (1) , 175-181
Modeling to Improve the Efficiency of Product and Process Development
ABSTRACT: Simulations are used in many areas of the food development chain, have major impact in process engineering and scale‐up studies, and are used to guide chemical and physical understanding in food research. On the other hand, they have much less impact on the development of food recipes. Consumer pressure is driving for healthier yet tastier foods, which need to be built for the purpose. This requires an understanding of the functions of food and how its structure can be engineered for that purpose and will require integration of product and process development. This should increase the use and impact of simulations, because of the increased scientific content of product development and engineers becoming more accustomed to using simulation as one tool of the trade. However, to date there are too few validated models amenable to truly predictive simulations: more needs to be done to develop predictive models at the fundamental level, before industrial food development can use simulations in the daily routine. Another key factor is the education of more people in the proper understanding and use of modeling as one of the tools guiding food product development.
- 30 January 2008
- Published by Wiley in Comprehensive Reviews in Food Science and Food Safety
- Vol. 7 (1) , 175-181
Modeling to Improve the Efficiency of Product and Process Development
ABSTRACT: Simulations are used in many areas of the food development chain, have major impact in process engineering and scale‐up studies, and are used to guide chemical and physical understanding in food research. On the other hand, they have much less impact on the development of food recipes. Consumer pressure is driving for healthier yet tastier foods, which need to be built for the purpose. This requires an understanding of the functions of food and how its structure can be engineered for that purpose and will require integration of product and process development. This should increase the use and impact of simulations, because of the increased scientific content of product development and engineers becoming more accustomed to using simulation as one tool of the trade. However, to date there are too few validated models amenable to truly predictive simulations: more needs to be done to develop predictive models at the fundamental level, before industrial food development can use simulations in the daily routine. Another key factor is the education of more people in the proper understanding and use of modeling as one of the tools guiding food product development.
- 15 March 2005
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 5 (6) , 646-656
Compact model for multi-phase liquid–liquid flows in micro-fluidic devices
We present a compact model describing the laminar flow of viscous multiphase fluids in micro-channel networks. We apply this model to the flow of 2 immiscible fluids representing typically oil and water, in a network of micro-channels comprising one inlet for each fluid splitting into 2 branches meeting at a T-junction, where the 2 phases are combined before exiting the network through two outlets. This network is akin to an electrical “Wheatstone bridge” and represents a simplified interdigital micro-reactor, where the fluids to be mixed are separated into smaller branches and later re-combined together. We show from an analytical solution and a computational modelling that fluid flow inside this network is very sensitive to small differences in fluid resistance between the various branches of the network, which may lead to catastrophic error in fluid distribution between the various branches that can have a profound effect on mixing. These errors depend on the viscosity difference between the fluids, on the processing conditions, and also on the geometric resistance parameters of the various channels. Increasing the resistance of the distribution channels upstream of the fluid junctions allows minimisation of the distribution errors. Interaction between the fluids can also lead to transients that are orders of magnitude longer than the flooding time of the channels. This may be exploited to provide impedance-like terms in flui-logic operations.
- 15 March 2005
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 5 (6) , 646-656
Compact model for multi-phase liquid–liquid flows in micro-fluidic devices
We present a compact model describing the laminar flow of viscous multiphase fluids in micro-channel networks. We apply this model to the flow of 2 immiscible fluids representing typically oil and water, in a network of micro-channels comprising one inlet for each fluid splitting into 2 branches meeting at a T-junction, where the 2 phases are combined before exiting the network through two outlets. This network is akin to an electrical “Wheatstone bridge” and represents a simplified interdigital micro-reactor, where the fluids to be mixed are separated into smaller branches and later re-combined together. We show from an analytical solution and a computational modelling that fluid flow inside this network is very sensitive to small differences in fluid resistance between the various branches of the network, which may lead to catastrophic error in fluid distribution between the various branches that can have a profound effect on mixing. These errors depend on the viscosity difference between the fluids, on the processing conditions, and also on the geometric resistance parameters of the various channels. Increasing the resistance of the distribution channels upstream of the fluid junctions allows minimisation of the distribution errors. Interaction between the fluids can also lead to transients that are orders of magnitude longer than the flooding time of the channels. This may be exploited to provide impedance-like terms in flui-logic operations.
- 1 October 2002
- Published by Wiley in Journal of Food Science
- Vol. 67 (8) , 2987-2996
Flavor Release from Cooking Oil during Heating
The release of 10 methylketones and ethyl ester molecules from vegetable oil has been followed during heating to 130 and 160 °C. The activity coefficient is not affected by the temperature increase, so that the temperature dependence of the partition coefficient is well approximated by that of the saturated vapor pressure. Computational fluid dynamics simulations show that the flavor distribution in the oil remains largely heterogeneous during heating. In spite of this heterogeneity, a simple homogeneous 2‐equation model reproduces quantitatively both simulation and experimental data during the heating period. Therefore, such a model can be used to analyze experimental results, even in strongly inhomogeneous and non‐isothermal conditions.
- 1 October 2002
- Published by Wiley in Journal of Food Science
- Vol. 67 (8) , 2987-2996
Flavor Release from Cooking Oil during Heating
The release of 10 methylketones and ethyl ester molecules from vegetable oil has been followed during heating to 130 and 160 °C. The activity coefficient is not affected by the temperature increase, so that the temperature dependence of the partition coefficient is well approximated by that of the saturated vapor pressure. Computational fluid dynamics simulations show that the flavor distribution in the oil remains largely heterogeneous during heating. In spite of this heterogeneity, a simple homogeneous 2‐equation model reproduces quantitatively both simulation and experimental data during the heating period. Therefore, such a model can be used to analyze experimental results, even in strongly inhomogeneous and non‐isothermal conditions.
- 1 September 2002
- Published by Wiley in Journal of Food Science
- Vol. 67 (7) , 2534-2542
Simplified Kinetic Scheme of Flavor Formation by the Maillard Reaction
The simplified kinetic scheme presented categorizes the volatile compounds into 4 classes: pyrroles and other nitrogen‐containing heterocyclic compounds (PY), furans and other oxygen‐containing heterocyclic compounds (FU), carbonyls (C), and pyrazines (PZ). The scheme comprises 11 reaction steps. The order of magnitude of the reaction rate for some of these steps could be determined from literature sources. Using these rates, the scheme was able to correlate the pseudo‐zero‐order rate of generation of FU and PZ (from the literature) to the initial temperature and concentration of reactants. It also reproduces the kinetics of volatile formation in a model glucose‐alanine system in a glycerol matrix, as measured for 4 temperatures by GC‐MS.
- 1 September 2002
- Published by Wiley in Journal of Food Science
- Vol. 67 (7) , 2534-2542
Simplified Kinetic Scheme of Flavor Formation by the Maillard Reaction
The simplified kinetic scheme presented categorizes the volatile compounds into 4 classes: pyrroles and other nitrogen‐containing heterocyclic compounds (PY), furans and other oxygen‐containing heterocyclic compounds (FU), carbonyls (C), and pyrazines (PZ). The scheme comprises 11 reaction steps. The order of magnitude of the reaction rate for some of these steps could be determined from literature sources. Using these rates, the scheme was able to correlate the pseudo‐zero‐order rate of generation of FU and PZ (from the literature) to the initial temperature and concentration of reactants. It also reproduces the kinetics of volatile formation in a model glucose‐alanine system in a glycerol matrix, as measured for 4 temperatures by GC‐MS.