K. F. de Korte
Research Subjects
Research Interests
K. F. de Korte has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- D. Harmsen
KWR Watercycle Research Institute, P.O. Box 1072, 3430 BB Nieuwegein, The Netherlands;
1 shared publication - Dick van Beest
ICT Procos, PO Box 11, 4200 AA, Gorinchem, The Netherlands
1 shared publication - Emile R. Cornelissen
Particle and Interfacial Technology (PaInT), Ghent University, Coupure Links 653, 9000, Ghent, Belgium; Center for Advanced Process Technology for Urban Resource Recovery (CAPTURE), Ghent University, Frieda Saeysstraat 1, 9052, Ghent, Belgium; KWR Water Research Institute, Groningenhaven 7, 3433 PE, Nieuwegein, the Netherlands
1 shared publication Erno de Graaf
Waternet, PO Box 94370, 1090 GJ, Amsterdam, The Netherlands
1 shared publication- Erwin F. Beerendonk
KWR Watercycle Research Institute, P.O. Box 1072, 3430 BB Nieuwegein, The Netherlands;
1 shared publication H. Oo
PUB Consultants Pte Ltd, 82 Toh Guan Road East #C4-03, Singapore 608575
1 shared publication
Latest Publications
- 1 April 2011
- Published by IWA Publishing in Water Science & Technology
- Vol. 63 (8) , 1557-1565
The innovative Osmotic Membrane Bioreactor (OMBR) for reuse of wastewater
An innovative osmotic membrane bioreactor (OMBR) is currently under development for the reclamation of wastewater, which combines activated sludge treatment and forward osmosis (FO) membrane separation with a RO post-treatment. The research focus is FO membrane fouling and performance using different activated sludge investigated both at laboratory scale (membrane area of 112 cm2) and at on-site bench scale (flat sheet membrane area of 0.1m2). FO performance on laboratory-scale (i) increased with temperature due to a decrease in viscosity and (ii) was independent of the type of activated sludge. Draw solution leakage increased with temperature and varied for different activated sludge. FO performance on bench-scale (i) increased with osmotic driving force, (ii) depended on the membrane orientation due to internal concentration polarization and (iii) was invariant to feed flow decrease and air injection at the feed and draw side. Draw solution leakage could not be evaluated on bench-scale due to experimental limitation. Membrane fouling was not found on laboratory scale and bench-scale, however, partially reversible fouling was found on laboratory scale for FO membranes facing the draw solution. Economic assessment indicated a minimum flux of 15 L.m−2h−1 at 0.5M NaCl for OMBR-RO to be cost effective, depending on the FO membrane price.
- 1 April 2011
- Published by IWA Publishing in Water Science & Technology
- Vol. 63 (8) , 1557-1565
The innovative Osmotic Membrane Bioreactor (OMBR) for reuse of wastewater
An innovative osmotic membrane bioreactor (OMBR) is currently under development for the reclamation of wastewater, which combines activated sludge treatment and forward osmosis (FO) membrane separation with a RO post-treatment. The research focus is FO membrane fouling and performance using different activated sludge investigated both at laboratory scale (membrane area of 112 cm2) and at on-site bench scale (flat sheet membrane area of 0.1m2). FO performance on laboratory-scale (i) increased with temperature due to a decrease in viscosity and (ii) was independent of the type of activated sludge. Draw solution leakage increased with temperature and varied for different activated sludge. FO performance on bench-scale (i) increased with osmotic driving force, (ii) depended on the membrane orientation due to internal concentration polarization and (iii) was invariant to feed flow decrease and air injection at the feed and draw side. Draw solution leakage could not be evaluated on bench-scale due to experimental limitation. Membrane fouling was not found on laboratory scale and bench-scale, however, partially reversible fouling was found on laboratory scale for FO membranes facing the draw solution. Economic assessment indicated a minimum flux of 15 L.m−2h−1 at 0.5M NaCl for OMBR-RO to be cost effective, depending on the FO membrane price.
- 1 July 2009
- Published by IWA Publishing in Water Science & Technology
- Vol. 60 (2) , 475-482
RTC simulations on large branched sewer systems with SmaRTControl
In The Netherlands many large branched sewer systems exist. RTC can improve the performance of these systems. The objective of the universal algorithm of SmaRTControl is to improve the performance of the sewer system and the WWTP. The effect of RTC under rain weather flow conditions is simulated using a hydrological model with 19 drainage districts. The system related inefficiency coefficient (SIC) is introduced for assessment of the performance of sewer systems. The performance can be improved by RTC in combination with increased pumping capacities in the drainage districts, but without increasing the flow to the WWTP. Under dry weather flow conditions the flow to the WWTP can be equalized by storage of wastewater in the sewer system. It is concluded that SmaRTControl can improve the performance, that simulations are necessary and that SIC is an excellent parameter for assessment of the performance.
- 1 July 2009
- Published by IWA Publishing in Water Science & Technology
- Vol. 60 (2) , 475-482
RTC simulations on large branched sewer systems with SmaRTControl
In The Netherlands many large branched sewer systems exist. RTC can improve the performance of these systems. The objective of the universal algorithm of SmaRTControl is to improve the performance of the sewer system and the WWTP. The effect of RTC under rain weather flow conditions is simulated using a hydrological model with 19 drainage districts. The system related inefficiency coefficient (SIC) is introduced for assessment of the performance of sewer systems. The performance can be improved by RTC in combination with increased pumping capacities in the drainage districts, but without increasing the flow to the WWTP. Under dry weather flow conditions the flow to the WWTP can be equalized by storage of wastewater in the sewer system. It is concluded that SmaRTControl can improve the performance, that simulations are necessary and that SIC is an excellent parameter for assessment of the performance.