Aniruddha Pramod Kulkarni
Research Subjects
Research Interests
Aniruddha Pramod Kulkarni has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Sarbjit Giddey
CSIRO Energy, Victoria, Australia
7 shared publicationsDaniel Fini
4 shared publicationsSaheli Biswas
Department of Chemical and Biological Engineering, Monash University, Victoria, Australia
3 shared publications- Saheli Biswas
CSIRO Energy, Private Bag 10, Clayton South, VIC 3169, Australia
3 shared publications Sankar Bhattacharya
Department of Chemical and Biological Engineering, Monash University, Victoria, Australia
3 shared publications- Sankar Bhattacharya
Department of Chemical & Biological Engineering, Monash University, Wellington Rd, Clayton, VIC 3800, Australia
3 shared publications
Latest Publications
- 22 October 2025
- Published by Cassyni
Session 3B: Emerging Electrolyses Technology
This seminar session critically appraises emerging electrolysis technologies addressing the urgent need for scalable, cost-effective green hydrogen production to support climate goals and renewable energy integration. Three innovative approaches were presented: a rotating reversible fuel cell (RFC) employing artificial gravity to enhance gas bubble removal and electrode utilization, achieving up to fivefold increased hydrogen production per electrode area with significantly reduced size, capital expenditure (CAPEX), and operating expenditure (OPEX); a solar-driven modular system integrating commercial photovoltaics with air-fed, moisture-absorbing electrolysis cells designed for direct coupling to variable renewable energy sources, enabling rapid dynamic response and simplified balance-of-plant, resulting in fourfold lower energy costs and flexible grid operation; and a medium-temperature (100–150 °C) electrolyzer based on a mesoporous ceramic membrane grown on porous supports, allowing high current densities (>0.5 A/cm²) at low voltage ( 1.6 V) without precious metal catalysts, with scalable planar and tubular configurations offering improved efficiency, reduced membrane thickness, and enhanced operational flexibility. Key challenges identified include membrane durability and lifetime validation, scale-up and automation for manufacturing, market acceptance, and securing pilot-scale funding amid policy and financial uncertainties. The session underscores the importance of system-level innovation beyond stack optimization, integration with renewable energy variability, and the need for supportive funding mechanisms to bridge the “valley of death” in technology deployment. Collectively, these advances demonstrate promising pathways toward compact, efficient, and flexible electrolysis solutions critical for accelerating the hydrogen economy and grid balancing applications. Welcome from the Chair Rotating Electrolysis When solar panels make hydrogen. Solhyd’s simplified route to green hydrogen C-Cell: Mesoporous membrane electrolysis with proven scale, 41.5 kWh/kg H₂ efficiency, and lower capex Discussion
- 22 October 2025
- Published by Cassyni
Session 3B: Emerging Electrolyses Technology
This seminar session critically appraises emerging electrolysis technologies addressing the urgent need for scalable, cost-effective green hydrogen production to support climate goals and renewable energy integration. Three innovative approaches were presented: a rotating reversible fuel cell (RFC) employing artificial gravity to enhance gas bubble removal and electrode utilization, achieving up to fivefold increased hydrogen production per electrode area with significantly reduced size, capital expenditure (CAPEX), and operating expenditure (OPEX); a solar-driven modular system integrating commercial photovoltaics with air-fed, moisture-absorbing electrolysis cells designed for direct coupling to variable renewable energy sources, enabling rapid dynamic response and simplified balance-of-plant, resulting in fourfold lower energy costs and flexible grid operation; and a medium-temperature (100–150 °C) electrolyzer based on a mesoporous ceramic membrane grown on porous supports, allowing high current densities (>0.5 A/cm²) at low voltage ( 1.6 V) without precious metal catalysts, with scalable planar and tubular configurations offering improved efficiency, reduced membrane thickness, and enhanced operational flexibility. Key challenges identified include membrane durability and lifetime validation, scale-up and automation for manufacturing, market acceptance, and securing pilot-scale funding amid policy and financial uncertainties. The session underscores the importance of system-level innovation beyond stack optimization, integration with renewable energy variability, and the need for supportive funding mechanisms to bridge the “valley of death” in technology deployment. Collectively, these advances demonstrate promising pathways toward compact, efficient, and flexible electrolysis solutions critical for accelerating the hydrogen economy and grid balancing applications. Welcome from the Chair Rotating Electrolysis When solar panels make hydrogen. Solhyd’s simplified route to green hydrogen C-Cell: Mesoporous membrane electrolysis with proven scale, 41.5 kWh/kg H₂ efficiency, and lower capex Discussion
- Open Access
- 21 January 2022
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 26 (3) , 695-707
Evaluation of novel ZnO–Ag cathode for CO2 electroreduction in solid oxide electrolyser
CO2 and steam/CO2 electroreduction to CO and methane in solid oxide electrolytic cells (SOEC) has gained major attention in the past few years. This work evaluates, for the very first time, the performance of two different ZnO–Ag cathodes: one where ZnO nanopowder was mixed with Ag powder for preparing the cathode ink (ZnOmix–Ag cathode) and the other one where Ag cathode was infiltrated with a zinc nitrate solution (ZnOinf –Ag cathode). ZnOmix–Ag cathode had a better distribution of ZnO particles throughout the cathode, resulting in almost double CO generation while electrolysing both dry CO2 and H2/CO2 (4:1 v/v). A maximum overall CO2 conversion of 48% (in H2/CO2) at 1.7 V and 700 °C clearly indicated that as low as 5 wt% zinc loading is capable of CO2 electroreduction. It was further revealed that for ZnOinf –Ag cathode, most of CO generation took place through RWGS reaction, but for ZnOmix–Ag cathode, it was the synergistic effect of both RWGS reaction and CO2 electrolysis. Although ZnOinf –Ag cathode produced trace amount of methane at higher voltages, with ZnOmix–Ag cathode, there was absolutely no methane. This seems to be due to strong electronic interaction between Zn and Ag that might have suppressed the catalytic activity of the cathode towards methanation.
- 21 January 2022
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 26 (3) , 695-707
Open AccessEvaluation of novel ZnO–Ag cathode for CO2 electroreduction in solid oxide electrolyser
CO2 and steam/CO2 electroreduction to CO and methane in solid oxide electrolytic cells (SOEC) has gained major attention in the past few years. This work evaluates, for the very first time, the performance of two different ZnO–Ag cathodes: one where ZnO nanopowder was mixed with Ag powder for preparing the cathode ink (ZnOmix–Ag cathode) and the other one where Ag cathode was infiltrated with a zinc nitrate solution (ZnOinf –Ag cathode). ZnOmix–Ag cathode had a better distribution of ZnO particles throughout the cathode, resulting in almost double CO generation while electrolysing both dry CO2 and H2/CO2 (4:1 v/v). A maximum overall CO2 conversion of 48% (in H2/CO2) at 1.7 V and 700 °C clearly indicated that as low as 5 wt% zinc loading is capable of CO2 electroreduction. It was further revealed that for ZnOinf –Ag cathode, most of CO generation took place through RWGS reaction, but for ZnOmix–Ag cathode, it was the synergistic effect of both RWGS reaction and CO2 electrolysis. Although ZnOinf –Ag cathode produced trace amount of methane at higher voltages, with ZnOmix–Ag cathode, there was absolutely no methane. This seems to be due to strong electronic interaction between Zn and Ag that might have suppressed the catalytic activity of the cathode towards methanation.
- 21 October 2021
- Published by Springer Nature in Ionics
- Vol. 28 (1) , 329-340
Fe-Ce0.1Zr0.9O2-Ag electrode for one-step methane synthesis in solid oxide electrolyser
- 21 October 2021
- Published by Springer Nature in Ionics
- Vol. 28 (1) , 329-340
Fe-Ce0.1Zr0.9O2-Ag electrode for one-step methane synthesis in solid oxide electrolyser
- Top Cited Papers
- 1 October 2021
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 46 (71) , 35365-35384
Direct ammonia solid-oxide fuel cells: A review of progress and prospects
- 1 October 2021
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 46 (71) , 35365-35384
Top Cited PapersDirect ammonia solid-oxide fuel cells: A review of progress and prospects
- Open Access
- 1 September 2021
- Published by Elsevier in Electrochimica Acta
- Vol. 391
Catalyst-induced enhancement of direct methane synthesis in solid oxide electrolyser
- 1 September 2021
- Published by Elsevier in Electrochimica Acta
- Vol. 391
Open AccessCatalyst-induced enhancement of direct methane synthesis in solid oxide electrolyser
- Open Access
A Theoretical Study on Reversible Solid Oxide Cells as Key Enablers of Cyclic Conversion between Electrical Energy and Fuel
Reversible solid oxide cells (rSOC) enable the efficient cyclic conversion between electrical and chemical energy in the form of fuels and chemicals, thereby providing a pathway for long-term and high-capacity energy storage. Amongst the different fuels under investigation, hydrogen, methane, and ammonia have gained immense attention as carbon-neutral energy vectors. Here we have compared the energy efficiency and the energy demand of rSOC based on these three fuels. In the fuel cell mode of operation (energy generation), two different routes have been considered for both methane and ammonia; Routes 1 and 2 involve internal reforming (in the case of methane) or cracking (in the case of ammonia) and external reforming or cracking, respectively. The use of hydrogen as fuel provides the highest round-trip efficiency (62.1%) followed by methane by Route 1 (43.4%), ammonia by Route 2 (41.1%), methane by Route 2 (40.4%), and ammonia by Route 1 (39.2%). The lower efficiency of internal ammonia cracking as opposed to its external counterpart can be attributed to the insufficient catalytic activity and stability of the state-of-the-art fuel electrode materials, which is a major hindrance to the scale-up of this technology. A preliminary cost estimate showed that the price of hydrogen, methane and ammonia produced in SOEC mode would be ~1.91, 3.63, and 0.48 $/kg, respectively. In SOFC mode, the cost of electricity generation using hydrogen, internally reformed methane, and internally cracked ammonia would be ~52.34, 46.30, and 47.11 $/MWh, respectively.
Open AccessA Theoretical Study on Reversible Solid Oxide Cells as Key Enablers of Cyclic Conversion between Electrical Energy and Fuel
Reversible solid oxide cells (rSOC) enable the efficient cyclic conversion between electrical and chemical energy in the form of fuels and chemicals, thereby providing a pathway for long-term and high-capacity energy storage. Amongst the different fuels under investigation, hydrogen, methane, and ammonia have gained immense attention as carbon-neutral energy vectors. Here we have compared the energy efficiency and the energy demand of rSOC based on these three fuels. In the fuel cell mode of operation (energy generation), two different routes have been considered for both methane and ammonia; Routes 1 and 2 involve internal reforming (in the case of methane) or cracking (in the case of ammonia) and external reforming or cracking, respectively. The use of hydrogen as fuel provides the highest round-trip efficiency (62.1%) followed by methane by Route 1 (43.4%), ammonia by Route 2 (41.1%), methane by Route 2 (40.4%), and ammonia by Route 1 (39.2%). The lower efficiency of internal ammonia cracking as opposed to its external counterpart can be attributed to the insufficient catalytic activity and stability of the state-of-the-art fuel electrode materials, which is a major hindrance to the scale-up of this technology. A preliminary cost estimate showed that the price of hydrogen, methane and ammonia produced in SOEC mode would be ~1.91, 3.63, and 0.48 $/kg, respectively. In SOFC mode, the cost of electricity generation using hydrogen, internally reformed methane, and internally cracked ammonia would be ~52.34, 46.30, and 47.11 $/MWh, respectively.
- Open Access
Evaluation of ((La0.60Sr0.40)0.95Co0.20Fe0.80O3-x)-Ag Composite Anode for Direct Ammonia Solid Oxide Fuel Cells and Effect of Pd Impregnation on the Electrochemical Performance
Ammonia produced using renewable hydrogen is being viewed as a promising media for the export of energy from locations rich in renewable energy sources. Solid oxide fuel cells (SOFCs) are efficient devices for converting such exported ammonia back into electricity at the point of use; however, investigations on materials and operating regimes for direct ammonia fuelled SOFCs are limited. In this work, we evaluated the direct ammonia SOFC performance with a Silver-Lanthanum Strontium Cobalt Ferrite (Ag-LSCF) composite anode and a novel Palladium (Pd) nanoparticle decorated Silver-Lanthanum Strontium Cobalt Ferrite (Pd-Ag-LSCF) composite anode in the temperature range of 500 °C to 800 °C. It is hypothesised that palladium nanoparticles in the anode provide hydrogen dissolution and shift the ammonia decomposition reaction towards the right. The cell performance was evaluated with both hydrogen and ammonia as fuels and a clear-cut improvement in the performance was observed with the addition of Pd for both the fuels. The results showed performance enhancements of 20% and 43% with hydrogen and ammonia fuels, respectively, from the addition of Pd to the Ag-LSCF anode. Open-circuit voltage (OCV) values of the cells with hydrogen and ammonia fuels recorded over the temperature range of 500 °C to 800 °C indicated the possibility of direct electro-oxidation of ammonia in SOFCs.
Open AccessEvaluation of ((La0.60Sr0.40)0.95Co0.20Fe0.80O3-x)-Ag Composite Anode for Direct Ammonia Solid Oxide Fuel Cells and Effect of Pd Impregnation on the Electrochemical Performance
Ammonia produced using renewable hydrogen is being viewed as a promising media for the export of energy from locations rich in renewable energy sources. Solid oxide fuel cells (SOFCs) are efficient devices for converting such exported ammonia back into electricity at the point of use; however, investigations on materials and operating regimes for direct ammonia fuelled SOFCs are limited. In this work, we evaluated the direct ammonia SOFC performance with a Silver-Lanthanum Strontium Cobalt Ferrite (Ag-LSCF) composite anode and a novel Palladium (Pd) nanoparticle decorated Silver-Lanthanum Strontium Cobalt Ferrite (Pd-Ag-LSCF) composite anode in the temperature range of 500 °C to 800 °C. It is hypothesised that palladium nanoparticles in the anode provide hydrogen dissolution and shift the ammonia decomposition reaction towards the right. The cell performance was evaluated with both hydrogen and ammonia as fuels and a clear-cut improvement in the performance was observed with the addition of Pd for both the fuels. The results showed performance enhancements of 20% and 43% with hydrogen and ammonia fuels, respectively, from the addition of Pd to the Ag-LSCF anode. Open-circuit voltage (OCV) values of the cells with hydrogen and ammonia fuels recorded over the temperature range of 500 °C to 800 °C indicated the possibility of direct electro-oxidation of ammonia in SOFCs.
- Open Access
- 4 March 2021
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 5 (7) , 2055-2064
In situ synthesis of methane using Ag–GDC composite electrodes in a tubular solid oxide electrolytic cell: new insight into the role of oxide ion removal
The conversion of waste CO2 into energy carrier fuels (“electrofuels”) using renewable energy (RE) in solid oxide electrolytic cells (SOECs) is a fast-emerging technology. Methane is one such potential electrofuel under consideration for the transport and local storage of RE. Most of the synthetic methane generation routes under investigation are two-step processes utilizing SOECs as a source of either H2 or syngas (H2/CO mixture) that undergoes methanation in a subsequent thermochemical reactor. However, the technology for direct one-step in situ synthesis of methane in SOECs is still at an early stage. This work demonstrates, for the very first time, purely electrolytic one-step methane generation in a symmetric, tubular SOEC in the temperature range of 500–700 °C in the absence of any methanation catalyst simply by electrolysing a mixture of H2 and CO2. The non-attainment of methane at OCV and in contrast methane generation under applied potential indicate that the phenomenon is completely driven by electrochemical processes. Interestingly, at all temperatures, the first trace of methane was detected at a certain minimum value of current density, and that value of current density increased non-linearly with temperature. The extent of methane generation appears to be effectively shifted by increasing the rate of oxide ion removal from the cell. Thus, we hypothesize that the electrochemical oxygen pumping phenomenon is a facilitator of such a direct methane synthesis reaction envisaged during in situ methanation in SOECs.
- 4 March 2021
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 5 (7) , 2055-2064
Open AccessIn situ synthesis of methane using Ag–GDC composite electrodes in a tubular solid oxide electrolytic cell: new insight into the role of oxide ion removal
The conversion of waste CO2 into energy carrier fuels (“electrofuels”) using renewable energy (RE) in solid oxide electrolytic cells (SOECs) is a fast-emerging technology. Methane is one such potential electrofuel under consideration for the transport and local storage of RE. Most of the synthetic methane generation routes under investigation are two-step processes utilizing SOECs as a source of either H2 or syngas (H2/CO mixture) that undergoes methanation in a subsequent thermochemical reactor. However, the technology for direct one-step in situ synthesis of methane in SOECs is still at an early stage. This work demonstrates, for the very first time, purely electrolytic one-step methane generation in a symmetric, tubular SOEC in the temperature range of 500–700 °C in the absence of any methanation catalyst simply by electrolysing a mixture of H2 and CO2. The non-attainment of methane at OCV and in contrast methane generation under applied potential indicate that the phenomenon is completely driven by electrochemical processes. Interestingly, at all temperatures, the first trace of methane was detected at a certain minimum value of current density, and that value of current density increased non-linearly with temperature. The extent of methane generation appears to be effectively shifted by increasing the rate of oxide ion removal from the cell. Thus, we hypothesize that the electrochemical oxygen pumping phenomenon is a facilitator of such a direct methane synthesis reaction envisaged during in situ methanation in SOECs.
- 23 November 2020
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 5 (2) , 486-500
Techno-economic analysis of a sustainable process for converting CO 2 and H 2 O to feedstock for fuels and chemicals
Environmental and economically-competitive co-electrolysis and catalytic processes were developed for production of feedstock for fuels and chemicals from CO 2 and H 2 O.
- 23 November 2020
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 5 (2) , 486-500
Techno-economic analysis of a sustainable process for converting CO 2 and H 2 O to feedstock for fuels and chemicals
Environmental and economically-competitive co-electrolysis and catalytic processes were developed for production of feedstock for fuels and chemicals from CO 2 and H 2 O.
- Open Access
- 8 September 2020
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 8
A Review on Synthesis of Methane as a Pathway for Renewable Energy Storage With a Focus on Solid Oxide Electrolytic Cell-Based Processes
Environmental issues related to global warming are constantly pushing the fossil fuel-based energy sector toward an efficient and economically viable utilization of renewable energy. However, challenges related to renewable energy call for alternative routes of its conversion to fuels and chemicals by an emerging Power-to-X approach. Methane is one such high-valued fuel that can be produced through renewables-powered electrolytic routes. Such routes employ alkaline electrolyzers, proton exchange membrane electrolyzers, and solid oxide electrolyzers, commonly known as solid oxide electrolysis cells (SOECs). SOECs have the potential to utilize the waste heat generated from exothermic methanation reactions to reduce the expensive electrical energy input required for electrolysis. A further advantage of an SOEC lies in its capacity to co-electrolyze both steam and carbon dioxide as opposed to only water, and this inherent capability of an SOEC can be harnessed for in situ synthesis of methane within a single reactor. However, the concept of in situ methanation in SOECs is still at a nascent stage and requires significant advancements in SOEC materials, particularly in developing a cathode electrocatalyst that demonstrates activity toward both steam electrolysis and methanation reactions. Equally important is the appropriate reactor design along with optimization of cell operating conditions (temperature, pressure, and applied potential). This review elucidates those developments along with research and development opportunities in this space. Also presented here is an efficiency comparison of different routes of synthetic methane production using SOECs in various modes, that is, as a source of hydrogen, syngas, and hydrogen/carbon dioxide mixture, and for in situ methane synthesis.
- 8 September 2020
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 8
Open AccessA Review on Synthesis of Methane as a Pathway for Renewable Energy Storage With a Focus on Solid Oxide Electrolytic Cell-Based Processes
Environmental issues related to global warming are constantly pushing the fossil fuel-based energy sector toward an efficient and economically viable utilization of renewable energy. However, challenges related to renewable energy call for alternative routes of its conversion to fuels and chemicals by an emerging Power-to-X approach. Methane is one such high-valued fuel that can be produced through renewables-powered electrolytic routes. Such routes employ alkaline electrolyzers, proton exchange membrane electrolyzers, and solid oxide electrolyzers, commonly known as solid oxide electrolysis cells (SOECs). SOECs have the potential to utilize the waste heat generated from exothermic methanation reactions to reduce the expensive electrical energy input required for electrolysis. A further advantage of an SOEC lies in its capacity to co-electrolyze both steam and carbon dioxide as opposed to only water, and this inherent capability of an SOEC can be harnessed for in situ synthesis of methane within a single reactor. However, the concept of in situ methanation in SOECs is still at a nascent stage and requires significant advancements in SOEC materials, particularly in developing a cathode electrocatalyst that demonstrates activity toward both steam electrolysis and methanation reactions. Equally important is the appropriate reactor design along with optimization of cell operating conditions (temperature, pressure, and applied potential). This review elucidates those developments along with research and development opportunities in this space. Also presented here is an efficiency comparison of different routes of synthetic methane production using SOECs in various modes, that is, as a source of hydrogen, syngas, and hydrogen/carbon dioxide mixture, and for in situ methane synthesis.