Bidyut K. Paul
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Bidyut K. Paul has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Soumik Bardhan
Department of Chemistry University of North Bengal Darjeeling- 734 013 India
6 shared publications- Kaushik Kundu
Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560012, India
5 shared publications Kaushik Kundu
Surface and Colloid Science Laboratory, Geological Studies Unit Indian Statistical Institute 203, B.T. Road Kolkata- 700 108 India
3 shared publications- Swapan K. Saha
Department of Chemistry University of North Bengal Darjeeling 734 013 India
3 shared publications Barnali Kar
Department of Chemistry, University of North Bengal, Darjeeling-734 013, India
2 shared publicationsGulmi Chakraborty
Department of Chemistry, University of North Bengal, Darjeeling-734 013, India
2 shared publications
Latest Publications
- 9 December 2016
- Published by Wiley in ChemistrySelect
- Vol. 1 (20) , 6406-6421
Formation of Oil/Water Interface by Mixed Surface Active Ionic Liquid‐Ethoxylated Alkyl Ether: Energetics, Microstructures, Solvation Dynamics, and Antimicrobial Activity
Using the benefits of superior surface activity of surfactant‐like ionic liquids (SAILs) and synergistic interaction of oppositely charged surfactants, herein we formulate the oil/water interface composed of equimolar composition of 1‐hexadecyl‐3‐methylimidazolium chloride (C 16 mimCl) and polyoxyethylene (20) cetyl ether (Brij‐58) for the first time. The primary role of cosurfactant to stabilize the interface of water‐in‐oil droplets was investigated by using isomeric cosurfactant (e. g., 1‐pentanol and isoamyl alcohol). The distribution of cosurfactant in interfacial region of nano droplets and bulk oil was evaluated as a function of different hydration level, and temperature. Energetic studies revealed formation of the organized oil/water interface by releasing heat during transfer of cosurfactant from oil to interface. Droplet morphology was examined to visualize the effect of water content, and added Brij‐58. Mechanistic information of percolation behaviour was discussed with help of DLS results. Various hydrogen bonding environment of entrapped water along with partitioning behaviour was established from novel fluorescence deconvolution method and correlated with FTIR and time‐resolved fluorescence studies. The antimicrobial activity of microemulsions along with individual components was measured against Gram‐negative and Gram‐positive bacteria. Mixed C 16 mimCl/Brij‐58 microemulsion confirmed as efficient antimicrobial agent compared to the individual components.
- 9 December 2016
- Published by Wiley in ChemistrySelect
- Vol. 1 (20) , 6406-6421
Formation of Oil/Water Interface by Mixed Surface Active Ionic Liquid‐Ethoxylated Alkyl Ether: Energetics, Microstructures, Solvation Dynamics, and Antimicrobial Activity
Using the benefits of superior surface activity of surfactant‐like ionic liquids (SAILs) and synergistic interaction of oppositely charged surfactants, herein we formulate the oil/water interface composed of equimolar composition of 1‐hexadecyl‐3‐methylimidazolium chloride (C 16 mimCl) and polyoxyethylene (20) cetyl ether (Brij‐58) for the first time. The primary role of cosurfactant to stabilize the interface of water‐in‐oil droplets was investigated by using isomeric cosurfactant (e. g., 1‐pentanol and isoamyl alcohol). The distribution of cosurfactant in interfacial region of nano droplets and bulk oil was evaluated as a function of different hydration level, and temperature. Energetic studies revealed formation of the organized oil/water interface by releasing heat during transfer of cosurfactant from oil to interface. Droplet morphology was examined to visualize the effect of water content, and added Brij‐58. Mechanistic information of percolation behaviour was discussed with help of DLS results. Various hydrogen bonding environment of entrapped water along with partitioning behaviour was established from novel fluorescence deconvolution method and correlated with FTIR and time‐resolved fluorescence studies. The antimicrobial activity of microemulsions along with individual components was measured against Gram‐negative and Gram‐positive bacteria. Mixed C 16 mimCl/Brij‐58 microemulsion confirmed as efficient antimicrobial agent compared to the individual components.
- 25 May 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (60) , 55104-55116
Synergistic interactions of surfactant blends in aqueous medium are reciprocated in non-polar medium with improved efficacy as a nanoreactor
Organized assemblies in aqueous and non-aqueous media based on mixed surfactants are one of the desired areas for experimental studies and carrying out chemical reactions due to synergistic performance and efficient solvents for various substrates. In this report, a model C–C cross coupling Heck reaction between n-butyl acrylate and 4-iodo-toluene is performed both in micelles and water/oil microemulsion systems as reaction media using a similar set of surfactants, [cetyltrimethylammonium bromide (CTAB) and polyoxyethylene (20) cetyl ether (C16E20)], in their single and mixed states for the first time. In order to explain the possible location and mechanism of reaction in these media, multitechnique approaches are employed to understand the mutual interactions between surfactant(s) and other constituents in pure and mixed states at air–water as well as oil–water interfaces. A synergistic interaction is evidenced experimentally for a mixed CTAB/C16E20 micellar system, which is also supported by theoretical calculations using density functional theory (DFT). The yield of Heck product in different media follows the order water < pure micelle < mixed micelle, which indicates a significant role of the confined environment of the aggregated systems. Further, mixed microemulsions including constituents of the formulations 1-pentanol and n-heptane or n-decane are explored as nanoreactors for carrying out such a reaction. Reaction yield in mixed water-in-oil (w/o) systems as a function of different hydration levels has been correlated with formation and microstructural characteristics of these systems. Further, mixed microemulsions at lower hydration levels produce synergistic performance compared to micelles and individual constituents in terms of reaction yield. These results reveal that the reaction occurs in neither the water nor oil domain, evidently in the micelle/water pseudo-phase and at the palisade layer of the oil/water interface of microemulsions. Moreover, reaction yields in the studied media are rationalized in terms of interaction parameters, spontaneity of micellization, interfacial population of 1-pentanol, and spontaneity of formation of w/o microemulsions.
- 25 May 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (60) , 55104-55116
Synergistic interactions of surfactant blends in aqueous medium are reciprocated in non-polar medium with improved efficacy as a nanoreactor
Organized assemblies in aqueous and non-aqueous media based on mixed surfactants are one of the desired areas for experimental studies and carrying out chemical reactions due to synergistic performance and efficient solvents for various substrates. In this report, a model C–C cross coupling Heck reaction between n-butyl acrylate and 4-iodo-toluene is performed both in micelles and water/oil microemulsion systems as reaction media using a similar set of surfactants, [cetyltrimethylammonium bromide (CTAB) and polyoxyethylene (20) cetyl ether (C16E20)], in their single and mixed states for the first time. In order to explain the possible location and mechanism of reaction in these media, multitechnique approaches are employed to understand the mutual interactions between surfactant(s) and other constituents in pure and mixed states at air–water as well as oil–water interfaces. A synergistic interaction is evidenced experimentally for a mixed CTAB/C16E20 micellar system, which is also supported by theoretical calculations using density functional theory (DFT). The yield of Heck product in different media follows the order water < pure micelle < mixed micelle, which indicates a significant role of the confined environment of the aggregated systems. Further, mixed microemulsions including constituents of the formulations 1-pentanol and n-heptane or n-decane are explored as nanoreactors for carrying out such a reaction. Reaction yield in mixed water-in-oil (w/o) systems as a function of different hydration levels has been correlated with formation and microstructural characteristics of these systems. Further, mixed microemulsions at lower hydration levels produce synergistic performance compared to micelles and individual constituents in terms of reaction yield. These results reveal that the reaction occurs in neither the water nor oil domain, evidently in the micelle/water pseudo-phase and at the palisade layer of the oil/water interface of microemulsions. Moreover, reaction yields in the studied media are rationalized in terms of interaction parameters, spontaneity of micellization, interfacial population of 1-pentanol, and spontaneity of formation of w/o microemulsions.
- 6 June 2015
- Published by Wiley in Journal of Surfactants and Detergents
- Vol. 18 (4) , 547-567
The Schulman Method of Cosurfactant Titration of the Oil/Water Interface (Dilution Method): A Review on a Well‐Known Powerful Technique in Interfacial Science for Characterization of Water‐in‐Oil Microemulsions
Microemulsions are thermodynamically stable, isotropic transparent mixtures of two immiscible liquids (polar and nonpolar) and amphiphile(s) (usually surfactant and/or cosurfactant). The cosurfactant plays an important role by blending with surfactants, and partitioned between the coexisting aqueous and oleic phases to control the bending elasticity of the interfacial layer to render stability to the dispersion. The microheterogeneity of such dispersions makes them useful in biological and technological applications. Various techniques viz., conductance, interfacial tension, SANS etc. were applied to estimate the distribution of cosurfactant between the interface and the bulk oil. However, a simple but ingenious method comprising repetitively oil dilution with cosurfactant titration till attainment of stable microemulsions was also used to measure the distribution of cosurfactant. This review summarizes formation and characterization of water‐in‐oil microemulsions stabilized by single or mixed surfactants of different charge types and polar head groups or mixed surface active ionic liquid and surfactant, and cosurfactants of different lipophilicities in both hydrocarbons and long chain alkyl ester oil, emphasizing interfacial composition, thermodynamics of formation and structural parameters by the dilution method coupled with transport properties, microstructures and states of water organization inside the pool etc. using instrumental techniques. Applicability of the data obtained from dilution method in different areas, viz. nanomaterial synthesis, enzyme activity, etc. have been reported. Indeed, this article presented a journey of development and significant contribution in utilizing this elegant and inexpensive method to accomplish the formation of microemulsion through consistent motivation by researchers of different countries.
- 6 June 2015
- Published by Wiley in Journal of Surfactants and Detergents
- Vol. 18 (4) , 547-567
The Schulman Method of Cosurfactant Titration of the Oil/Water Interface (Dilution Method): A Review on a Well‐Known Powerful Technique in Interfacial Science for Characterization of Water‐in‐Oil Microemulsions
Microemulsions are thermodynamically stable, isotropic transparent mixtures of two immiscible liquids (polar and nonpolar) and amphiphile(s) (usually surfactant and/or cosurfactant). The cosurfactant plays an important role by blending with surfactants, and partitioned between the coexisting aqueous and oleic phases to control the bending elasticity of the interfacial layer to render stability to the dispersion. The microheterogeneity of such dispersions makes them useful in biological and technological applications. Various techniques viz., conductance, interfacial tension, SANS etc. were applied to estimate the distribution of cosurfactant between the interface and the bulk oil. However, a simple but ingenious method comprising repetitively oil dilution with cosurfactant titration till attainment of stable microemulsions was also used to measure the distribution of cosurfactant. This review summarizes formation and characterization of water‐in‐oil microemulsions stabilized by single or mixed surfactants of different charge types and polar head groups or mixed surface active ionic liquid and surfactant, and cosurfactants of different lipophilicities in both hydrocarbons and long chain alkyl ester oil, emphasizing interfacial composition, thermodynamics of formation and structural parameters by the dilution method coupled with transport properties, microstructures and states of water organization inside the pool etc. using instrumental techniques. Applicability of the data obtained from dilution method in different areas, viz. nanomaterial synthesis, enzyme activity, etc. have been reported. Indeed, this article presented a journey of development and significant contribution in utilizing this elegant and inexpensive method to accomplish the formation of microemulsion through consistent motivation by researchers of different countries.
- 15 April 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (40) , 21000-21009
Physicochemical studies of water-in-oil nonionic microemulsion in presence of benzimidazole-based ionic liquid and probing of microenvironment using model C–C cross coupling (Heck) reaction
The present report focuses on the evaluation of the interfacial composition and the thermodynamics of the transfer of 1-pentanol (Pn) from a continuous oil phase to the interface of w/o nonionic microemulsion [Tween-20/Pn/cyclohexane(Cy)/water] in the absence and the presence of an ionic liquid (IL) (1-butyl-3-propylbenzimidazolium bromide) under different physicochemical conditions [viz. variation in concentrations of IL (0.0 → 0.20 mol dm−3) and temperature (293 → 323 K] at a fixed molar ratio of water to surfactant (ω) by the Schulman's method of cosurfactant titration at the oil/water interface. The overall transfer process has been found to be spontaneous, exothermic and organized in the absence or the presence of IL, but shown to be influenced by [IL]. The microstructure and state of water organization inside a pool of these systems have been characterized by different experimental techniques, e.g., conductivity, DLS and FTIR in the absence or the presence of IL. In addition, a C–C cross coupling reaction (Heck reaction) has been employed to explore the properties of IL (additive) in the confined environment of the microemulsion vis-à-vis its interaction with the constituents of the interface. The reaction progress has been monitored using the above techniques. The reaction ended with the highest yield (75%) in the presence of 0.05 mol dm−3 of IL, wherein the microemulsion forms spontaneously with the highest stability.
- 15 April 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (40) , 21000-21009
Physicochemical studies of water-in-oil nonionic microemulsion in presence of benzimidazole-based ionic liquid and probing of microenvironment using model C–C cross coupling (Heck) reaction
The present report focuses on the evaluation of the interfacial composition and the thermodynamics of the transfer of 1-pentanol (Pn) from a continuous oil phase to the interface of w/o nonionic microemulsion [Tween-20/Pn/cyclohexane(Cy)/water] in the absence and the presence of an ionic liquid (IL) (1-butyl-3-propylbenzimidazolium bromide) under different physicochemical conditions [viz. variation in concentrations of IL (0.0 → 0.20 mol dm−3) and temperature (293 → 323 K] at a fixed molar ratio of water to surfactant (ω) by the Schulman's method of cosurfactant titration at the oil/water interface. The overall transfer process has been found to be spontaneous, exothermic and organized in the absence or the presence of IL, but shown to be influenced by [IL]. The microstructure and state of water organization inside a pool of these systems have been characterized by different experimental techniques, e.g., conductivity, DLS and FTIR in the absence or the presence of IL. In addition, a C–C cross coupling reaction (Heck reaction) has been employed to explore the properties of IL (additive) in the confined environment of the microemulsion vis-à-vis its interaction with the constituents of the interface. The reaction progress has been monitored using the above techniques. The reaction ended with the highest yield (75%) in the presence of 0.05 mol dm−3 of IL, wherein the microemulsion forms spontaneously with the highest stability.