Hideo Tajima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Hideo Tajima has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
Fumio Kiyono
19 shared publicationsAkihiro Yamasaki
18 shared publicationsKazuaki Yamagiwa
Graduate School of Science and Technology, Niigata University, 2-8050 Ikarashi, Niigata 950-2181, Japan
15 shared publications- Hiroyuki Komatsu
Department of Advanced Materials Science and Technology, Graduate School of Science and Technology, Niigata University, 8050, Ikarashi 2-no-cho, Nishi-ku, Niigata 950-2181, Japan
10 shared publications Ryosuke Ezure
8 shared publicationsHakuai Inoue
Department of Bioengineering, Soka University
5 shared publications
Latest Publications
- Open Access
- 1 October 2025
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 218
Mass transfer during hydrate-based HFC134a gas separation using a vertical pipe reactor with a static mixer
- 1 October 2025
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 218
Open AccessMass transfer during hydrate-based HFC134a gas separation using a vertical pipe reactor with a static mixer
- Open Access
- 5 May 2025
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 218, 400-407
Prediction of the mean velocity following a flow-pattern transition and apparent viscosity for various fluorinated gas hydrate slurries in a pipeline
- 5 May 2025
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 218, 400-407
Open AccessPrediction of the mean velocity following a flow-pattern transition and apparent viscosity for various fluorinated gas hydrate slurries in a pipeline
- 17 April 2025
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 218, 1-7
Evaluation of mass transfer characteristics of gas molecules during hydrate formation by using dimensionless numbers
- 17 April 2025
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 218, 1-7
Evaluation of mass transfer characteristics of gas molecules during hydrate formation by using dimensionless numbers
- Open Access
- 20 November 2024
- Published by Society of Chemical Engineers, Japan in KAGAKU KOGAKU RONBUNSHU
- Vol. 50 (6) , 135-142
Liquid-Liquid Extraction of Metals Using Environmentally Friendly Fluorinated Solvents
溶媒抽出法は,水溶液から金属イオンを選択的に分離する最も効果的な技術の1つである.従来の溶媒抽出法では,ドデカンやシクロヘキサンなどの極性の低い炭化水素系の有機溶媒が用いられているが,本研究では,溶媒に地球温暖化係数が低い環境対応型フッ素系溶剤HCFO-1233ydを用いた新規溶媒抽出法を提案した.フッ素系溶剤は低沸点・不燃性であるため,蒸留により再利用が可能である.金属種は核廃水によく含まれるCs, Rb, Srと,工業廃水に含まれ先行研究としてもよく取り上げられるCu, Caを選択した.リン酸水素ビス(2-エチルヘキシル)(D2EHPA)を用いると,HCFO-1233ydの抽出性能は,対照系として使用したHFE-347pc-fおよびシクロヘキサンと同等の抽出性能を示し,2価金属では弱酸性の平衡条件下で抽出率90%以上,1価金属ではより中性に近い平衡条件下で60%以上を示した.pH調整の代替にCa鹸化抽出剤を用いた1価金属抽出を行うと,80%以上の抽出率を示した.HCFO-1233ydが金属抽出に対するよい溶剤であることが確認できた.
- 20 November 2024
- Published by Society of Chemical Engineers, Japan in KAGAKU KOGAKU RONBUNSHU
- Vol. 50 (6) , 135-142
Open AccessLiquid-Liquid Extraction of Metals Using Environmentally Friendly Fluorinated Solvents
溶媒抽出法は,水溶液から金属イオンを選択的に分離する最も効果的な技術の1つである.従来の溶媒抽出法では,ドデカンやシクロヘキサンなどの極性の低い炭化水素系の有機溶媒が用いられているが,本研究では,溶媒に地球温暖化係数が低い環境対応型フッ素系溶剤HCFO-1233ydを用いた新規溶媒抽出法を提案した.フッ素系溶剤は低沸点・不燃性であるため,蒸留により再利用が可能である.金属種は核廃水によく含まれるCs, Rb, Srと,工業廃水に含まれ先行研究としてもよく取り上げられるCu, Caを選択した.リン酸水素ビス(2-エチルヘキシル)(D2EHPA)を用いると,HCFO-1233ydの抽出性能は,対照系として使用したHFE-347pc-fおよびシクロヘキサンと同等の抽出性能を示し,2価金属では弱酸性の平衡条件下で抽出率90%以上,1価金属ではより中性に近い平衡条件下で60%以上を示した.pH調整の代替にCa鹸化抽出剤を用いた1価金属抽出を行うと,80%以上の抽出率を示した.HCFO-1233ydが金属抽出に対するよい溶剤であることが確認できた.
- 24 May 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (22) , 9998-10008
Absorption of CO2 by Tetra-n-Butylammonium Bromide Semiclathrate Hydrate Slurries in a Bubble Column with Temperature Swing
- 24 May 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (22) , 9998-10008
Absorption of CO2 by Tetra-n-Butylammonium Bromide Semiclathrate Hydrate Slurries in a Bubble Column with Temperature Swing
- 23 April 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 194, 77-86
Assessment of flow pattern and rheological properties of SF6 hydrate slurry
- 23 April 2023
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 194, 77-86
Assessment of flow pattern and rheological properties of SF6 hydrate slurry
- 20 March 2022
- Published by Society of Chemical Engineers, Japan in KAGAKU KOGAKU RONBUNSHU
- Vol. 48 (2) , 35-41
Remediation of Cesium-Contaminated Natural Minerals using a Combination of Unit Operations
福島原子力発電事故により約1300万m3のセシウム吸着土壌が発生し減容化が求められている.この汚染土壌を再生利用可能な土壌とするためには,土壌から70%程度のCsを除去する必要がある.Cs分離方法として固液抽出が挙げられるが,抽出後のCs含有廃水の処理が必要である.汚染土壌中のCsは,主にバーミキュライト(VRM)のような層状鉱物によって吸着され,塩水溶液による固液抽出のみではCs除去70%に達しない.そのため,土壌を処理するための改善方法が必要である.本研究では,塩水溶液による固液抽出の他に分級と磁気分離,液液抽出を組み合わせた洗浄方法を提案する.模擬土壌を用いてこの方法の有効性と本洗浄法のCs除去性能の評価を目的とした.抽剤として様々な濃度の塩水溶液を用いた結果,K+イオンを含む水溶液が最適であった.KCl水溶液を用いて鉱物ごとのCs脱離率の経時変化を測定し,3サイト脱離モデルを用いてフィッティングした.Cs不可逆吸着サイト(FES)を多く含む鉱物ほど脱離率と脱離速度が低かった.模擬土壌に対して単位操作を順に行ったところ,模擬土壌から総括で70%程度のCsを除去することができ,磁気分離と固液抽出の組み合わせが汚染土壌の洗浄に有効であることが示された.吸着時間の増加にともなって鉱物表面のCsがFESや多孔質構造の奥側に移動するため,FESが存在する鉱物では吸着時間の増加によりCs脱離率が低下した.低Cs吸着量の汚染土壌では除去性能が低下する可能性があるが,固液抽出条件をさらに探査することで,高脱離率で本洗浄法を応用できるだろう.
- 20 March 2022
- Published by Society of Chemical Engineers, Japan in KAGAKU KOGAKU RONBUNSHU
- Vol. 48 (2) , 35-41
Remediation of Cesium-Contaminated Natural Minerals using a Combination of Unit Operations
福島原子力発電事故により約1300万m3のセシウム吸着土壌が発生し減容化が求められている.この汚染土壌を再生利用可能な土壌とするためには,土壌から70%程度のCsを除去する必要がある.Cs分離方法として固液抽出が挙げられるが,抽出後のCs含有廃水の処理が必要である.汚染土壌中のCsは,主にバーミキュライト(VRM)のような層状鉱物によって吸着され,塩水溶液による固液抽出のみではCs除去70%に達しない.そのため,土壌を処理するための改善方法が必要である.本研究では,塩水溶液による固液抽出の他に分級と磁気分離,液液抽出を組み合わせた洗浄方法を提案する.模擬土壌を用いてこの方法の有効性と本洗浄法のCs除去性能の評価を目的とした.抽剤として様々な濃度の塩水溶液を用いた結果,K+イオンを含む水溶液が最適であった.KCl水溶液を用いて鉱物ごとのCs脱離率の経時変化を測定し,3サイト脱離モデルを用いてフィッティングした.Cs不可逆吸着サイト(FES)を多く含む鉱物ほど脱離率と脱離速度が低かった.模擬土壌に対して単位操作を順に行ったところ,模擬土壌から総括で70%程度のCsを除去することができ,磁気分離と固液抽出の組み合わせが汚染土壌の洗浄に有効であることが示された.吸着時間の増加にともなって鉱物表面のCsがFESや多孔質構造の奥側に移動するため,FESが存在する鉱物では吸着時間の増加によりCs脱離率が低下した.低Cs吸着量の汚染土壌では除去性能が低下する可能性があるが,固液抽出条件をさらに探査することで,高脱離率で本洗浄法を応用できるだろう.
- Open Access
- 8 January 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 333, 04011
Development of Flow Type Cesium Removing Device Using Fluorinated Solvent
In order to simultaneously achieve separation and volume reduction of radioactive cesium in the aqueous solution, we proposed a solvent extraction using a fluorinated solvent which is a nonflammable liquid having a low boiling point and is easy to distill for regeneration. Firstly optimum conditions for single extraction were determined in a batch operation. The extraction experiment was carried out by changing the pH of 5 mg/L non-radioactive cesium aqueous solution using bis(2-ethylhexyl)phosphoric acid (D2EHPA) as an extractant. The higher the pH of the aqueous phase and the D2EHPA concentration, the better the removal rate. The highest removal rate was about 60% under the pH=13. From the experimental results, the optimum extraction condition was determined as pH=13 and [D2EHPA]=0.15 mol/L. Next multiple extraction test was carried out under this condition, and 90% cesium removal could be achieved in 3 times extraction. Finally, the flow type device using a static mixer for mixing and extracting parts was proposed and then the cesium removal test was performed. The cesium removal performance of this device was equivalent to the batch system.
- 8 January 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 333, 04011
Open AccessDevelopment of Flow Type Cesium Removing Device Using Fluorinated Solvent
In order to simultaneously achieve separation and volume reduction of radioactive cesium in the aqueous solution, we proposed a solvent extraction using a fluorinated solvent which is a nonflammable liquid having a low boiling point and is easy to distill for regeneration. Firstly optimum conditions for single extraction were determined in a batch operation. The extraction experiment was carried out by changing the pH of 5 mg/L non-radioactive cesium aqueous solution using bis(2-ethylhexyl)phosphoric acid (D2EHPA) as an extractant. The higher the pH of the aqueous phase and the D2EHPA concentration, the better the removal rate. The highest removal rate was about 60% under the pH=13. From the experimental results, the optimum extraction condition was determined as pH=13 and [D2EHPA]=0.15 mol/L. Next multiple extraction test was carried out under this condition, and 90% cesium removal could be achieved in 3 times extraction. Finally, the flow type device using a static mixer for mixing and extracting parts was proposed and then the cesium removal test was performed. The cesium removal performance of this device was equivalent to the batch system.
- Open Access
- 8 January 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 333, 04002
Study on Mass Transfer Characteristics of Hydrate-based Gas Absorber
Hydrated-based gas separation is a method capable of selectively separating and recovering greenhouse gases. Although a conventional hydrate-based gas separation apparatus is a batch or a semi-batch system, continuous operation is preferable to increase the throughput of gas without changing the apparatus volume. Recently, we proposed a flow type apparatus to allow continuous operation of hydrate formation (absorption) and subsequent decomposition (desorption). The aim of this study is to investigate the mass transfer characteristics of the continuous apparatus using the HFC134a-N2 mixed gas system. The volumetric mass transfer coefficient was calculated especially during a steady state of gas absorption. Besides, we compared mass transfer performance between the hydrate-based gas absorber and a conventional bubble column. Sodium dodecyl sulfate was used as a hydrate dispersant. In the flow type apparatus, the gas-liquid contact was good and the hydrate slurry state was observed during hydrate formation. In the surfactant solution, the volumetric mass transfer coefficient increased in comparison with that in water. The volumetric mass transfer coefficient with hydrate was higher than that of the bubble column. These results suggest that hydrate formation improves gas absorption performance.
- 8 January 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 333, 04002
Open AccessStudy on Mass Transfer Characteristics of Hydrate-based Gas Absorber
Hydrated-based gas separation is a method capable of selectively separating and recovering greenhouse gases. Although a conventional hydrate-based gas separation apparatus is a batch or a semi-batch system, continuous operation is preferable to increase the throughput of gas without changing the apparatus volume. Recently, we proposed a flow type apparatus to allow continuous operation of hydrate formation (absorption) and subsequent decomposition (desorption). The aim of this study is to investigate the mass transfer characteristics of the continuous apparatus using the HFC134a-N2 mixed gas system. The volumetric mass transfer coefficient was calculated especially during a steady state of gas absorption. Besides, we compared mass transfer performance between the hydrate-based gas absorber and a conventional bubble column. Sodium dodecyl sulfate was used as a hydrate dispersant. In the flow type apparatus, the gas-liquid contact was good and the hydrate slurry state was observed during hydrate formation. In the surfactant solution, the volumetric mass transfer coefficient increased in comparison with that in water. The volumetric mass transfer coefficient with hydrate was higher than that of the bubble column. These results suggest that hydrate formation improves gas absorption performance.