Ajit Thakker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ajit Thakker has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
T. S. Dhanasekaran
Wave Energy Research Team, Department of Mechanical and Aeronautical Engineering, University of Limerick, Limerick, Ireland
3 shared publications- Fergal Hourigan
Wave Energy Research Team, Department of Mechanical and Aeronautical Engineering, University of Limerick, Limerick, Ireland
2 shared publications J. Ryan
Wave Energy Research Team, Department of Mechanical and Aeronautical Engineering, University of Limerick, Limerick, Ireland
2 shared publicationsM. El. Hemry
Wave Energy Research Team, Department of Mechanical and Aeronautical Engineering, University of Limerick, Limerick, Ireland
2 shared publicationsF. Hourigan
Wave Energy Research Team, Department of Mechanical and Aeronautical Engineering, University of Limerick, Limerick, Ireland
1 shared publicationFergal Hourigan
Department of Mechanical and Aeronautical Engineering, Wave Energy Research Team, University of Limerick, Limerick, Ireland
1 shared publication
Latest Publications
- Open Access
- 1 January 2007
- Published by National Library of Serbia in Thermal Science
- Vol. 11 (4) , 157-170
3-D CFD analysis on effect of hub-to-tip ratio on performance of impulse turbine for wave energy conversion
This paper deals with the computational fluid dynamics analysis on effect of hub-to-tip ratio on performance of 0.6 m impulse turbine for wave energy conversion. Experiments have been conducted on the 0.6 m impulse turbine with 0.6 hub-to-tip ratio to validate the present computational fluid dynamics method and to analyze the aerodynamics in rotor and guide vanes, which demonstrates the necessity to improve the blade and guide vanes shape. Computational fluid dynamics analysis has been made on impulse turbine with different hub-to-tip ratio for various flow coefficients. The present computational fluid dynamics model can predict the experimental values with reasonable degree of accuracy. It also showed that the downstream guide vanes make considerable total pressure drop thus reducing the performance of the turbine. The computational fluid dynamics results showed that at the designed flow coefficient of 1.0 the turbine with 0.5 hub-to-tip ratio has better performance compared to 0.55 and 0.6 hub-to-tip ratio turbine.
- 1 January 2007
- Published by National Library of Serbia in Thermal Science
- Vol. 11 (4) , 157-170
Open Access3-D CFD analysis on effect of hub-to-tip ratio on performance of impulse turbine for wave energy conversion
This paper deals with the computational fluid dynamics analysis on effect of hub-to-tip ratio on performance of 0.6 m impulse turbine for wave energy conversion. Experiments have been conducted on the 0.6 m impulse turbine with 0.6 hub-to-tip ratio to validate the present computational fluid dynamics method and to analyze the aerodynamics in rotor and guide vanes, which demonstrates the necessity to improve the blade and guide vanes shape. Computational fluid dynamics analysis has been made on impulse turbine with different hub-to-tip ratio for various flow coefficients. The present computational fluid dynamics model can predict the experimental values with reasonable degree of accuracy. It also showed that the downstream guide vanes make considerable total pressure drop thus reducing the performance of the turbine. The computational fluid dynamics results showed that at the designed flow coefficient of 1.0 the turbine with 0.5 hub-to-tip ratio has better performance compared to 0.55 and 0.6 hub-to-tip ratio turbine.
- 25 October 2005
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 29 (13) , 1245-1260
Computed effect of guide vane shape on performance of impulse turbine for wave energy conversion
- 25 October 2005
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 29 (13) , 1245-1260
Computed effect of guide vane shape on performance of impulse turbine for wave energy conversion
- 31 July 2005
- Published by Elsevier in Renewable Energy
- Vol. 30 (9) , 1401-1410
A comparison of two meshing schemes for CFD analysis of the impulse turbine for wave energy applications
- 31 July 2005
- Published by Elsevier in Renewable Energy
- Vol. 30 (9) , 1401-1410
A comparison of two meshing schemes for CFD analysis of the impulse turbine for wave energy applications
- 23 March 2005
- Published by Elsevier in Renewable Energy
- Vol. 30 (15) , 2203-2219
Experimental studies on effect of guide vane shape on performance of impulse turbine for wave energy conversion
- 23 March 2005
- Published by Elsevier in Renewable Energy
- Vol. 30 (15) , 2203-2219
Experimental studies on effect of guide vane shape on performance of impulse turbine for wave energy conversion
- 13 December 2004
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 29 (1) , 13-36
Design and performance analysis of impulse turbine for a wave energy power plant
Wave energy is the most abundant source of renewable energy in the World. For the last two decades, engineers have been investigating and defining different methods for power extraction from wave motion. Two different turbines, namely Wells turbine and impulse turbine with guide vanes, are most commonly used around the world for wave energy power generation. The ultimate goal is to optimize the performance of the turbine under actual sea conditions. The total research effort has several strands; there is the manufacture and experimental testing of new turbines using the Wave Energy Research Team's (WERT) 0.6 m turbine test rig, the theoretical and computational analysis of the present impulse turbine using a commercial software package and finally the prediction of the performance of the turbine in a representative wave power device under real sea conditions using numerical simulation. Also, the WERT 0.6 m turbine test rig was upgraded with a data acquisition and control system to test the turbine in the laboratory under real sea conditions using the computer control system. As a result, it is proven experimentally and numerically that the turbine efficiency has been raised by 7% by reducing the hub-to-tip ratio from 0.7 to 0.6. Effect of tip clearance on performance of the turbine has been studied numerically and designed tip clearance ratio of 1% has been validated. From the numerical simulation studies, it is computed that the mean conversion efficiency is reduced around 5% and 4.58% due to compressible flow and damping effects inside OWC device. Copyright © 2005 John Wiley & Sons, Ltd.
- 13 December 2004
- Published by Hindawi Limited in International Journal of Energy Research
- Vol. 29 (1) , 13-36
Design and performance analysis of impulse turbine for a wave energy power plant
Wave energy is the most abundant source of renewable energy in the World. For the last two decades, engineers have been investigating and defining different methods for power extraction from wave motion. Two different turbines, namely Wells turbine and impulse turbine with guide vanes, are most commonly used around the world for wave energy power generation. The ultimate goal is to optimize the performance of the turbine under actual sea conditions. The total research effort has several strands; there is the manufacture and experimental testing of new turbines using the Wave Energy Research Team's (WERT) 0.6 m turbine test rig, the theoretical and computational analysis of the present impulse turbine using a commercial software package and finally the prediction of the performance of the turbine in a representative wave power device under real sea conditions using numerical simulation. Also, the WERT 0.6 m turbine test rig was upgraded with a data acquisition and control system to test the turbine in the laboratory under real sea conditions using the computer control system. As a result, it is proven experimentally and numerically that the turbine efficiency has been raised by 7% by reducing the hub-to-tip ratio from 0.7 to 0.6. Effect of tip clearance on performance of the turbine has been studied numerically and designed tip clearance ratio of 1% has been validated. From the numerical simulation studies, it is computed that the mean conversion efficiency is reduced around 5% and 4.58% due to compressible flow and damping effects inside OWC device. Copyright © 2005 John Wiley & Sons, Ltd.
- 1 November 2004
- Published by Springer Nature in Journal of Thermal Science
- Vol. 13 (4) , 315-320
2D CFD analysis and experimental analysis on the effect of hub to tip ratios on the performance of 0.6 m impulse turbine
- 1 November 2004
- Published by Springer Nature in Journal of Thermal Science
- Vol. 13 (4) , 315-320
2D CFD analysis and experimental analysis on the effect of hub to tip ratios on the performance of 0.6 m impulse turbine
- 1 July 2004
- Published by Taylor & Francis in International Journal of Ambient Energy
- Vol. 25 (3) , 123-133
Design analysis of 0.6m Impulse turbine with fixed guide vanes for wave energy power conversion
Wave energy is the most abundant source of renewable energy in the world. For the last two decades, engineers have been investigating and defining different methods for power extraction from wave motion. Two different turbines, namely the Wells turbine and Impulse turbine with guide vanes, are commonly in use around the world for wave energy power generation. The overall purpose of this research is to perform a complete design analysis of an Impulse turbine with fixed guide vanes for wave energy power generation. The ultimate goal is to optimise the performance of the turbine under actual sea conditions. This research is divided into two phases. First, to design and manufacture a 0.6m diameter Impulse turbine with fixed guide vanes with a new hub to tip ratio; then to validate this design experimentally using Computational Fluid Dynamics (CFD) and to compare the performance characteristics obtained experimentally with those obtained from CFD. The second phase is to optimise turbine blade and guide vane geometry based on theoretical, experimental and CFD analysis and finally, to manufacture and test a 2nd generation turbine, based on this optimum design. This paper presents the work done during the first phase of the research. It reports the design of a 0.6m diameter Impulse turbine with fixed guide vanes, manufacture of turbine blades using a unique method of Rapid Prototyping on a Fused Decomposition Modelling (FDM) machine, experimental analysis of the turbine and comparison of the CFD work with experiment.
- 1 July 2004
- Published by Taylor & Francis in International Journal of Ambient Energy
- Vol. 25 (3) , 123-133
Design analysis of 0.6m Impulse turbine with fixed guide vanes for wave energy power conversion
Wave energy is the most abundant source of renewable energy in the world. For the last two decades, engineers have been investigating and defining different methods for power extraction from wave motion. Two different turbines, namely the Wells turbine and Impulse turbine with guide vanes, are commonly in use around the world for wave energy power generation. The overall purpose of this research is to perform a complete design analysis of an Impulse turbine with fixed guide vanes for wave energy power generation. The ultimate goal is to optimise the performance of the turbine under actual sea conditions. This research is divided into two phases. First, to design and manufacture a 0.6m diameter Impulse turbine with fixed guide vanes with a new hub to tip ratio; then to validate this design experimentally using Computational Fluid Dynamics (CFD) and to compare the performance characteristics obtained experimentally with those obtained from CFD. The second phase is to optimise turbine blade and guide vane geometry based on theoretical, experimental and CFD analysis and finally, to manufacture and test a 2nd generation turbine, based on this optimum design. This paper presents the work done during the first phase of the research. It reports the design of a 0.6m diameter Impulse turbine with fixed guide vanes, manufacture of turbine blades using a unique method of Rapid Prototyping on a Fused Decomposition Modelling (FDM) machine, experimental analysis of the turbine and comparison of the CFD work with experiment.
- 11 September 2003
- Published by Elsevier in Renewable Energy
- Vol. 29 (3) , 305-317
Modeling and scaling of the impulse turbine for wave power applications
- 11 September 2003
- Published by Elsevier in Renewable Energy
- Vol. 29 (3) , 305-317
Modeling and scaling of the impulse turbine for wave power applications
- Open Access
- 1 January 2003
- Published by Wiley in International Journal of Rotating Machinery
- Vol. 9 (6) , 443-450
Effects of Compressibility on the Performance of a Wave‐Energy Conversion Device with an Impulse Turbine Using a Numerical Simulation Technique
This article presents work carried out to predict the behavior of a 0.6 m impulse turbine with fixed guide vanes as compared with that of a 0.6 hub‐to‐tip ratio turbine under real sea conditions. In order to predict the true performance of the actual oscillating water column (OWC), the numerical technique was fine‐tuned by incorporating the compressibility effect. Water surface elevation versus time history was used as the input data for this purpose. The effect of compressibility inside the air chamber and the turbine′s performance under unsteady and irregular flow conditions were analyzed numerically. Considering the quasi‐steady assumptions, the unidirectional steady‐flow experimental data was used to simulate the turbines characteristics under irregular unsteady flow conditions. The results showed that the performance of this type of turbine is quite stable and that the efficiency of the air chamber and the mean conversion efficiency are reduced by around 8% and 5%, respectively, as a result of the compressibility inside the air chamber. The mean efficiencies of the OWC device and the impulse turbine were predicted for 1 month, based on the Irish wave climate, and it was found that the total time period of wave data used is one of the important factors in the simulation technique.
- 1 January 2003
- Published by Wiley in International Journal of Rotating Machinery
- Vol. 9 (6) , 443-450
Open AccessEffects of Compressibility on the Performance of a Wave‐Energy Conversion Device with an Impulse Turbine Using a Numerical Simulation Technique
This article presents work carried out to predict the behavior of a 0.6 m impulse turbine with fixed guide vanes as compared with that of a 0.6 hub‐to‐tip ratio turbine under real sea conditions. In order to predict the true performance of the actual oscillating water column (OWC), the numerical technique was fine‐tuned by incorporating the compressibility effect. Water surface elevation versus time history was used as the input data for this purpose. The effect of compressibility inside the air chamber and the turbine′s performance under unsteady and irregular flow conditions were analyzed numerically. Considering the quasi‐steady assumptions, the unidirectional steady‐flow experimental data was used to simulate the turbines characteristics under irregular unsteady flow conditions. The results showed that the performance of this type of turbine is quite stable and that the efficiency of the air chamber and the mean conversion efficiency are reduced by around 8% and 5%, respectively, as a result of the compressibility inside the air chamber. The mean efficiencies of the OWC device and the impulse turbine were predicted for 1 month, based on the Irish wave climate, and it was found that the total time period of wave data used is one of the important factors in the simulation technique.