Yewen Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yewen Zhang has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Hong Chen
5 shared publicationsChun Xiao
Tongji University Pohl Institute of Solid State Physics 1239 Siping Road, Shanghai 200092, China
4 shared publicationsLi He
4 shared publicationsFeihu Zheng
Pohl Institute of Solid State Physics, Tongji University, 1239 Siping Road, Shanghai 200092, China
3 shared publicationsJunfeng Xia
Tongji University Pohl Institute of Solid State Physics 1239 Siping Road, Shanghai 200092, China
3 shared publicationsLei Lei Qing-Quan
Harbin Univ Sci & Technol, Harbin 150080, Peoples R China
3 shared publications
Latest Publications
- 1 April 2013
- Published by Elsevier in Optics Communications
- Vol. 292, 5-10
Experimental demonstration of EIT effect in the metamaterials surface plasmon-like channel
- 1 April 2013
- Published by Elsevier in Optics Communications
- Vol. 292, 5-10
Experimental demonstration of EIT effect in the metamaterials surface plasmon-like channel
- 1 January 2010
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 59 (1) , 508-514
Numerical simulation of charge packet behavior in low-density polyethylene based on Gunn effect-like model
低密度聚乙烯材料中的空间电荷包现象通常会引起严重电场畸变而影响其击穿特性. 本文借鉴半导体中的耿氏效应的负微分迁移率机理来描述电荷包的形成机理,并结合载流子的注入条件及体内陷阱对电荷迁移的影响等因素,对文献中报道的两类外加场强不同且迁移趋势各异的空间电荷包行为进行了模拟仿真,模拟的电荷包大小随电场变化规律,电荷包迁移速率随时间变化规律等与相应实验结果符合.模拟结果表明,产生耿氏效应的负微分迁移率是造成电荷包非弥散传输的主要原因,其与材料电极注入情况及体内陷阱态的共同作用导致了空间电荷包行为迁移的多样性.
- 1 January 2010
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 59 (1) , 508-514
Numerical simulation of charge packet behavior in low-density polyethylene based on Gunn effect-like model
低密度聚乙烯材料中的空间电荷包现象通常会引起严重电场畸变而影响其击穿特性. 本文借鉴半导体中的耿氏效应的负微分迁移率机理来描述电荷包的形成机理,并结合载流子的注入条件及体内陷阱对电荷迁移的影响等因素,对文献中报道的两类外加场强不同且迁移趋势各异的空间电荷包行为进行了模拟仿真,模拟的电荷包大小随电场变化规律,电荷包迁移速率随时间变化规律等与相应实验结果符合.模拟结果表明,产生耿氏效应的负微分迁移率是造成电荷包非弥散传输的主要原因,其与材料电极注入情况及体内陷阱态的共同作用导致了空间电荷包行为迁移的多样性.
- 1 January 2010
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 59 (7) , 5067-5072
Experimental study on the distribution of trap levels in dielectric by photo-stimulated discharge
利用光刺激放电方法研究了线性低密度聚乙烯(LLDPE)中的陷阱能级分布,分别介绍了连续扫描与分段扫描这两种扫描方式并对它们进行了对比.指出在通常使用的连续扫描过程中,光刺激脱阱的不彻底给实验数据带来了一定的误差,着重讲述了分段扫描的理论基础以及实验过程.实验结果表明:单一波长辐照下的光刺激衰减电流的对数与时间成线性关系,它和分段扫描方法中的理论分析完全符合,同时也验证了在本实验中忽略载流子的重俘获过程是合理的;LLDPE中的俘获电荷位于4.14—6.22eV的陷阱能带内,但它们主要集中在陷阱能级为4.78
- 1 January 2010
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 59 (7) , 5067-5072
Experimental study on the distribution of trap levels in dielectric by photo-stimulated discharge
利用光刺激放电方法研究了线性低密度聚乙烯(LLDPE)中的陷阱能级分布,分别介绍了连续扫描与分段扫描这两种扫描方式并对它们进行了对比.指出在通常使用的连续扫描过程中,光刺激脱阱的不彻底给实验数据带来了一定的误差,着重讲述了分段扫描的理论基础以及实验过程.实验结果表明:单一波长辐照下的光刺激衰减电流的对数与时间成线性关系,它和分段扫描方法中的理论分析完全符合,同时也验证了在本实验中忽略载流子的重俘获过程是合理的;LLDPE中的俘获电荷位于4.14—6.22eV的陷阱能带内,但它们主要集中在陷阱能级为4.78
- 15 September 2009
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 106 (6) , 064105
Charge transportation and permittivity in electron beam irradiated polymethyl methacrylate
The charging phenomenon in the insulating dielectrics often occurs in the radiative environments such as in the outer space and in the nuclear reactor. Both surface charging and bulk charging have various influences on the dielectric properties. Understanding electrical properties of e-beam irradiated dielectrics is of great significance in order to maintain the stability and reliability of the related operating system. In this work, the effect of electron beam irradiation on the permittivity of polymethyl methacrylate (PMMA) samples was investigated. It was found that the variance of permittivity in e-beam irradiated PMMA is mainly determined by two factors. One is the porosity of the material. The irradiating process could increase the porosity of PMMA due to the escape of the small molecule (e.g., CO, , and ) produced during material degradation caused by e-beam irradiation. The enhanced higher porosity corresponds to lower permittivity. The distribution of the implanted charge is the other factor that influences the permittivity. When the distribution of electric field generated by the accumulating charge is asymmetric for the middle thickness of the sample, the PMMA sample with polar groups would be subjected to extra polarization by the field, which could lead to the increase in permittivity. Combining with the model of Wakino et al. [J. Am. Ceram. Soc. 76, 2588 (1993)] on permittivity of mixture materials, the Clausius–Mosotti equation was utilized to analyze the variation in permittivity in the e-beam irradiated PMMA samples.- 15 September 2009
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 106 (6) , 064105
Charge transportation and permittivity in electron beam irradiated polymethyl methacrylate
The charging phenomenon in the insulating dielectrics often occurs in the radiative environments such as in the outer space and in the nuclear reactor. Both surface charging and bulk charging have various influences on the dielectric properties. Understanding electrical properties of e-beam irradiated dielectrics is of great significance in order to maintain the stability and reliability of the related operating system. In this work, the effect of electron beam irradiation on the permittivity of polymethyl methacrylate (PMMA) samples was investigated. It was found that the variance of permittivity in e-beam irradiated PMMA is mainly determined by two factors. One is the porosity of the material. The irradiating process could increase the porosity of PMMA due to the escape of the small molecule (e.g., CO, , and ) produced during material degradation caused by e-beam irradiation. The enhanced higher porosity corresponds to lower permittivity. The distribution of the implanted charge is the other factor that influences the permittivity. When the distribution of electric field generated by the accumulating charge is asymmetric for the middle thickness of the sample, the PMMA sample with polar groups would be subjected to extra polarization by the field, which could lead to the increase in permittivity. Combining with the model of Wakino et al. [J. Am. Ceram. Soc. 76, 2588 (1993)] on permittivity of mixture materials, the Clausius–Mosotti equation was utilized to analyze the variation in permittivity in the e-beam irradiated PMMA samples.- 25 February 2009
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 112 (5) , 3103-3109
Morphology‐related packetlike space‐charge behavior in linear low‐density polyethylene doped with Al2O3 nanoparticles
Packetlike space‐charge behavior and the isothermal decay processes of the injected charge in neat linear low‐density polyethylene (LLDPE) and LLDPE doped with Al2O3 nanoparticles were investigated by the pressure wave propagation method. The 1‐mm sheet samples, sandwiched by semiconductive electrodes, were submitted to 40 kV/mm of direct current field at various temperatures for 3 h. The charge‐injecting rate and the apparent mobility of packetlike space charge under direct‐current stress were compared among the samples subjected to different blending processes with or without nanoparticles. The slight doping concentration showed a significant influence on the space‐charge dynamics, with a lower injecting rate and apparent mobility for higher doped samples. The isothermal decay processes of the injected charge indicated trap‐modulated features. The phenomena were considered to be related to the changing morphology of the matrix material. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
- 25 February 2009
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 112 (5) , 3103-3109
Morphology‐related packetlike space‐charge behavior in linear low‐density polyethylene doped with Al2O3 nanoparticles
Packetlike space‐charge behavior and the isothermal decay processes of the injected charge in neat linear low‐density polyethylene (LLDPE) and LLDPE doped with Al2O3 nanoparticles were investigated by the pressure wave propagation method. The 1‐mm sheet samples, sandwiched by semiconductive electrodes, were submitted to 40 kV/mm of direct current field at various temperatures for 3 h. The charge‐injecting rate and the apparent mobility of packetlike space charge under direct‐current stress were compared among the samples subjected to different blending processes with or without nanoparticles. The slight doping concentration showed a significant influence on the space‐charge dynamics, with a lower injecting rate and apparent mobility for higher doped samples. The isothermal decay processes of the injected charge indicated trap‐modulated features. The phenomena were considered to be related to the changing morphology of the matrix material. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009
- Open Access
- 20 February 2009
- Published by China Science Publishing & Media Ltd. in JOURNAL OF INFRARED AND MILLIMETER WAVES
- Vol. 28 (1) , 20-24
ONE-DIMENSIONAL PHOTONIC CRYSTALS CONSISTING OF METAMATERIALS BASED ON MICROSTRIP TRANSMISSION LINES
One-dimensional metamaterials were realized by using composite right/left-handed transmission lines(CRLH TLs),the transmission properties of the photonic crystals composed of metamaterials based on microstrips lines were measured and analyzed.The experimental results indicate that the photonic crystals possess Bragg gaps and effective-single-negative(ESNG) gap,and the ESNG gap does not shift when the lattice constant varies by the same factor,and the edges of the gap are determined by zero average permittivity ε—=0 and zero average permeability μ—=0,respectively.Zero-n— gap and zero-Φeff gap can be understood as an ESNG gap.The investigations of the photonic crystals consisting of metamaterials will benefit to the applications of the metamaterials in RF/microwave circuits and apparatus.
- 20 February 2009
- Published by China Science Publishing & Media Ltd. in JOURNAL OF INFRARED AND MILLIMETER WAVES
- Vol. 28 (1) , 20-24
Open AccessONE-DIMENSIONAL PHOTONIC CRYSTALS CONSISTING OF METAMATERIALS BASED ON MICROSTRIP TRANSMISSION LINES
One-dimensional metamaterials were realized by using composite right/left-handed transmission lines(CRLH TLs),the transmission properties of the photonic crystals composed of metamaterials based on microstrips lines were measured and analyzed.The experimental results indicate that the photonic crystals possess Bragg gaps and effective-single-negative(ESNG) gap,and the ESNG gap does not shift when the lattice constant varies by the same factor,and the edges of the gap are determined by zero average permittivity ε—=0 and zero average permeability μ—=0,respectively.Zero-n— gap and zero-Φeff gap can be understood as an ESNG gap.The investigations of the photonic crystals consisting of metamaterials will benefit to the applications of the metamaterials in RF/microwave circuits and apparatus.
- 1 January 2009
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 58 (12) , 8529-8536
Numerical simulation of space charge packet behavior in low-density polyethylene under direct current voltage
聚乙烯中的空间电荷包行为是空间电荷的一种特殊的输运行为.研究表明,空间电荷包行为由于受材料本身特性、外加电场大小以及环境温度等的影响,导致其产生过程及传输特性上存在较大差异,这些因素给空间电荷包行为产生机理研究带来了较大困难.通过对电荷的电极注入过程、载流子的体内迁移规律及空间电荷与体内陷阱的相互作用机制进行分析,探讨了不同外加电场及不同深度陷阱能级对电荷包行为造成的相关影响,在此基础上建立物理模型来描述电荷包的产生和迁移过程.模型中提出了在高于阈值电场时,载流子迁移速度与电场关系存在负微分迁移率的假设.基于此模型对空间包行为的模拟结果与实验结果取得较好的一致.
- 1 January 2009
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 58 (12) , 8529-8536
Numerical simulation of space charge packet behavior in low-density polyethylene under direct current voltage
聚乙烯中的空间电荷包行为是空间电荷的一种特殊的输运行为.研究表明,空间电荷包行为由于受材料本身特性、外加电场大小以及环境温度等的影响,导致其产生过程及传输特性上存在较大差异,这些因素给空间电荷包行为产生机理研究带来了较大困难.通过对电荷的电极注入过程、载流子的体内迁移规律及空间电荷与体内陷阱的相互作用机制进行分析,探讨了不同外加电场及不同深度陷阱能级对电荷包行为造成的相关影响,在此基础上建立物理模型来描述电荷包的产生和迁移过程.模型中提出了在高于阈值电场时,载流子迁移速度与电场关系存在负微分迁移率的假设.基于此模型对空间包行为的模拟结果与实验结果取得较好的一致.
- 1 January 2009
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 58 (9) , 6459-6464
Research of the recombination rate of space charge in LDPE film during the short-circuit discharge process via the photon counting method
通过对在直流高压作用下低密度聚乙烯薄膜中注入的空间电荷的短路放电发光测量,研究了聚乙烯薄膜中空间电荷的复合率.通过短路放电光子数的测量及定量分析考察了电压极性、场强大小及加压时间对短路下电荷复合率的影响.结果表明发光强度(复合率)随外加场强的变化明显,而与加压时间的关系不显著.但场强高于80 MV/m时发光强度(复合率)的增大速度变慢.结合本实验结果及他人的相关数据,得出了聚乙烯薄膜样品的发光效率约为5.9×10-6,短路初始阶段的0.2 s内样品的电荷复合率约为2.8%.
- 1 January 2009
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 58 (9) , 6459-6464
Research of the recombination rate of space charge in LDPE film during the short-circuit discharge process via the photon counting method
通过对在直流高压作用下低密度聚乙烯薄膜中注入的空间电荷的短路放电发光测量,研究了聚乙烯薄膜中空间电荷的复合率.通过短路放电光子数的测量及定量分析考察了电压极性、场强大小及加压时间对短路下电荷复合率的影响.结果表明发光强度(复合率)随外加场强的变化明显,而与加压时间的关系不显著.但场强高于80 MV/m时发光强度(复合率)的增大速度变慢.结合本实验结果及他人的相关数据,得出了聚乙烯薄膜样品的发光效率约为5.9×10-6,短路初始阶段的0.2 s内样品的电荷复合率约为2.8%.
- 8 August 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 15 (4) , 965-973
Effect of applied mechanical stress on space charge breakdown in electron beam irradiated polymethyl methacrylate
The role of applied mechanical stress on space charge breakdown in electron beam irradiated polymethyl methacrylate (PMMA) is investigated. Space charge is implanted into PMMA sheets by electron beam. Space charge is measured by laser induced pressure pulse technique to investigate injection, trapping and detrapping of charge. Mechanical stress is applied on PMMA sheet to study its influence on space charge behavior. Experimental results show that applied electric field is not a necessary condition for breakdown of insulating materials. The breakdown can be triggered during space charge detrapping. The detrapping of space charge can result in tree-like breakdown, wherein this phenomenon is termed as space charge breakdown. Effect of applied mechanical stress on the initiation of breakdown and the development of tree-like breakdown is discussed in this paper.
- 8 August 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 15 (4) , 965-973
Effect of applied mechanical stress on space charge breakdown in electron beam irradiated polymethyl methacrylate
The role of applied mechanical stress on space charge breakdown in electron beam irradiated polymethyl methacrylate (PMMA) is investigated. Space charge is implanted into PMMA sheets by electron beam. Space charge is measured by laser induced pressure pulse technique to investigate injection, trapping and detrapping of charge. Mechanical stress is applied on PMMA sheet to study its influence on space charge behavior. Experimental results show that applied electric field is not a necessary condition for breakdown of insulating materials. The breakdown can be triggered during space charge detrapping. The detrapping of space charge can result in tree-like breakdown, wherein this phenomenon is termed as space charge breakdown. Effect of applied mechanical stress on the initiation of breakdown and the development of tree-like breakdown is discussed in this paper.
- 1 March 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 229-232
Local Vortex Mode in Asymmetric Coupler Composed of Conventional Microstrip and Composite Right/Left-Handed Transmission Line with Lumped Elements
In this paper, a local vortex model is proposed to study the coupling modes that occur at the interface between a right-handed transmission line (RH TL) and a composite right/left handed transmission line (CRLH TL). Based on this model, it is demonstrated that the propagation constants on the two lines are parallel, while the power in the two lines are antiparallel. Full-wave simulation and time-domain experimental results are presented and verify this vortex model
- 1 March 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 229-232
Local Vortex Mode in Asymmetric Coupler Composed of Conventional Microstrip and Composite Right/Left-Handed Transmission Line with Lumped Elements
In this paper, a local vortex model is proposed to study the coupling modes that occur at the interface between a right-handed transmission line (RH TL) and a composite right/left handed transmission line (CRLH TL). Based on this model, it is demonstrated that the propagation constants on the two lines are parallel, while the power in the two lines are antiparallel. Full-wave simulation and time-domain experimental results are presented and verify this vortex model