Takashi Mino
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Takashi Mino has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Hiroyasu Satoh
Department of Socio-Cultural Environmental Studies, The University of Tokyo, Chiba, Japan
12 shared publications Tomonori Matsuo
JAPAN SOCIETY OF CIVIL ENGINEERS
7 shared publications- Mohammad Reza Alavi Moghaddam
Department of Civil & Environmental Engineering, Amirkabir University of Technology (Tehran Polytechnic), Iran
3 shared publications Rajeev Goel
3 shared publications- Britt-Marie Wilén
Division of Water Environment Technology, Department of Architecture and Civil Engineering, Chalmers University of Technology, 412 96 Göteborg, Sweden
2 shared publications - D. Lumley
Gryaab AB, Karl IX:s väg, SE-418 34 Göteborg, Sweden@gryaab.se
2 shared publications
Latest Publications
- Open Access
- 13 November 2019
- Published by Springer Nature
- p. 133-151
Time-Scale in Framing Disaster Risk Reduction in Sustainability
- 13 November 2019
- Published by Springer Nature
- p. 133-151
Open AccessTime-Scale in Framing Disaster Risk Reduction in Sustainability
- Open Access
- 13 November 2019
- Published by Springer Nature
- p. 175-180
Linking Framing to Actions for Sustanability
- 13 November 2019
- Published by Springer Nature
- p. 175-180
Open AccessLinking Framing to Actions for Sustanability
- 1 January 2014
- Published by Japan Society of Civil Engineers in Journal of Japan Society of Civil Engineers, Ser. G (Environmental Research)
- Vol. 70 (7)
Changes of Activated Sludge Bacterial Population Caused by Addition of Extracts From Activated Sludge – Effects of Organic Loading and Incubation Time
- 1 January 2014
- Published by Japan Society of Civil Engineers in Journal of Japan Society of Civil Engineers, Ser. G (Environmental Research)
- Vol. 70 (7)
Changes of Activated Sludge Bacterial Population Caused by Addition of Extracts From Activated Sludge – Effects of Organic Loading and Incubation Time
- 1 October 2007
- Vol. 17 (10) , 1704-7
Population dynamics of phage-host system of Microlunatus phosphovorus indigenous in activated sludge.
Monitoring of the phage-host system of Microlunatus phosphovorus indigenous in activated sludge was attempted. A laboratory-scale activated sludge process was operated for 5 weeks with synthetic wastewater. The phage-host system population in the process was monitored by plaque assay and FISH methods at every 3 days. During the process operation, the phage-host system populations were more or less steady, except for 1 week in the middle of the operation. In that period, initially M. phosphovorus decreased significantly and its lytic bacteriophages increased, and then M. phosphovorus increased back to its original level while its lytic bacteriophages decreased. This observation suggests that lytic bacteriophages should be considered as one of the biological factors affecting the bacterial population dynamics in activated sludge processes.
- 1 October 2007
- Vol. 17 (10) , 1704-7
Population dynamics of phage-host system of Microlunatus phosphovorus indigenous in activated sludge.
Monitoring of the phage-host system of Microlunatus phosphovorus indigenous in activated sludge was attempted. A laboratory-scale activated sludge process was operated for 5 weeks with synthetic wastewater. The phage-host system population in the process was monitored by plaque assay and FISH methods at every 3 days. During the process operation, the phage-host system populations were more or less steady, except for 1 week in the middle of the operation. In that period, initially M. phosphovorus decreased significantly and its lytic bacteriophages increased, and then M. phosphovorus increased back to its original level while its lytic bacteriophages decreased. This observation suggests that lytic bacteriophages should be considered as one of the biological factors affecting the bacterial population dynamics in activated sludge processes.
- 1 November 2006
- Published by IWA Publishing in Water Science & Technology
- Vol. 54 (10) , 55-66
Filter clogging in coarse pore filtration activated sludge process under high MLSS concentration
Coarse pore filtration activated sludge process is a type of hybrid process in which the secondary settling tank of the conventional activated sludge process is replaced by non- woven and coarse pore filter modules. The filter has pores, which are irregular in shape, and much bigger than micro-filtration membrane pores in size. The objective of the study is to find out the effect of the microbial community structure on filter clogging in the coarse pore filtration activated sludge process under high MLSS concentration in aerobic and anoxic/aerobic (A/A) conditions. Filter clogging started from day 65 and 70 in the A/A and aerobic process, respectively, but it was more severe in the A/A process compared to that in the aerobic process. EPS contents of sludge did not change significantly during the operation in both processes, and did not have a crucial effect on the observed filter clogging. There was no strong evidence for direct effect of the type and number of metazoa on filter clogging. The main difference between aerobic sludge and A/A sludge during the filter clogging period was the relative abundance of filamentous bacteria. According to the obtained results, it can be concluded that a higher presence of filamentous bacteria could reduce the severity of filter clogging in a coarse pore filtration activated sludge process.
- 1 November 2006
- Published by IWA Publishing in Water Science & Technology
- Vol. 54 (10) , 55-66
Filter clogging in coarse pore filtration activated sludge process under high MLSS concentration
Coarse pore filtration activated sludge process is a type of hybrid process in which the secondary settling tank of the conventional activated sludge process is replaced by non- woven and coarse pore filter modules. The filter has pores, which are irregular in shape, and much bigger than micro-filtration membrane pores in size. The objective of the study is to find out the effect of the microbial community structure on filter clogging in the coarse pore filtration activated sludge process under high MLSS concentration in aerobic and anoxic/aerobic (A/A) conditions. Filter clogging started from day 65 and 70 in the A/A and aerobic process, respectively, but it was more severe in the A/A process compared to that in the aerobic process. EPS contents of sludge did not change significantly during the operation in both processes, and did not have a crucial effect on the observed filter clogging. There was no strong evidence for direct effect of the type and number of metazoa on filter clogging. The main difference between aerobic sludge and A/A sludge during the filter clogging period was the relative abundance of filamentous bacteria. According to the obtained results, it can be concluded that a higher presence of filamentous bacteria could reduce the severity of filter clogging in a coarse pore filtration activated sludge process.
- 1 November 2006
- Published by IWA Publishing in Water Science & Technology
- Vol. 54 (10) , 201-208
Rain events and their effect on effluent quality studied at a full scale activated sludge treatment plant
The effect of rain events on effluent quality dynamics was studied at a full scale activated sludge wastewater treatment plant which has a process solution incorporating pre-denitrification in activated sludge with post-nitrification in trickling filters. The incoming wastewater flow varies significantly due to a combined sewer system. Changed flow conditions have an impact on the whole treatment process since the recirculation to the trickling filters is set by the hydraulic limitations of the secondary settlers. Apart from causing different hydraulic conditions in the plant, increased flow due to rain or snow-melting, changes the properties of the incoming wastewater which affects process performance and effluent quality, especially the particle removal efficiency. A comprehensive set of on-line and laboratory data were collected and analysed to assess the impact of rain events on the plant performance.
- 1 November 2006
- Published by IWA Publishing in Water Science & Technology
- Vol. 54 (10) , 201-208
Rain events and their effect on effluent quality studied at a full scale activated sludge treatment plant
The effect of rain events on effluent quality dynamics was studied at a full scale activated sludge wastewater treatment plant which has a process solution incorporating pre-denitrification in activated sludge with post-nitrification in trickling filters. The incoming wastewater flow varies significantly due to a combined sewer system. Changed flow conditions have an impact on the whole treatment process since the recirculation to the trickling filters is set by the hydraulic limitations of the secondary settlers. Apart from causing different hydraulic conditions in the plant, increased flow due to rain or snow-melting, changes the properties of the incoming wastewater which affects process performance and effluent quality, especially the particle removal efficiency. A comprehensive set of on-line and laboratory data were collected and analysed to assess the impact of rain events on the plant performance.
- 1 July 2006
- Published by IWA Publishing in Water Science & Technology
- Vol. 54 (1) , 147-155
Influence of flocculation and settling properties of activated sludge in relation to secondary settler performance
Floc characteristics were studied at a full scale activated sludge treatment plant with a unique process solution incorporating pre-denitrification with post-nitrification in nitrifying trickling filters. Since greater nitrogen removal is achieved when more secondary settled wastewater is recirculated to the trickling filters, the secondary settlers are always operated close to their maximal capacity. The flocculation and settling properties are therefore crucial and have an effect on the overall plant performance. Since the plant is operated at a short sludge age, these properties change quickly, resulting in variable maximal secondary settler capacity. The dynamics in floc structure and microbial community composition were studied and correlated to the secondary settler performance. Fluorescence in situ hybridisation was used to investigate the microbial community structure and their spatial distribution. The floc structure could to some extent be related to the flocculation and settling properties of the sludge. Even small differences had an influence suggesting that colloidal properties also play a significant role in determining the floc properties. No correlation between microbial community composition and settling properties could be established with the group-specific probes investigated.
- 1 July 2006
- Published by IWA Publishing in Water Science & Technology
- Vol. 54 (1) , 147-155
Influence of flocculation and settling properties of activated sludge in relation to secondary settler performance
Floc characteristics were studied at a full scale activated sludge treatment plant with a unique process solution incorporating pre-denitrification with post-nitrification in nitrifying trickling filters. Since greater nitrogen removal is achieved when more secondary settled wastewater is recirculated to the trickling filters, the secondary settlers are always operated close to their maximal capacity. The flocculation and settling properties are therefore crucial and have an effect on the overall plant performance. Since the plant is operated at a short sludge age, these properties change quickly, resulting in variable maximal secondary settler capacity. The dynamics in floc structure and microbial community composition were studied and correlated to the secondary settler performance. Fluorescence in situ hybridisation was used to investigate the microbial community structure and their spatial distribution. The floc structure could to some extent be related to the flocculation and settling properties of the sludge. Even small differences had an influence suggesting that colloidal properties also play a significant role in determining the floc properties. No correlation between microbial community composition and settling properties could be established with the group-specific probes investigated.
- 1 June 2003
- Published by IWA Publishing in Water Science & Technology
- Vol. 47 (12) , 73-80
Performance and microbial dynamics in the coarse pore filtration activated sludge process at different SRTs (solids retention times)
In this research, three SRTs (about 10, 30 and 75 days (without wasting the sludge except for sampling)) were applied to three reactors equipped with non-woven and coarse pore filter modules. The flux was adjusted to about 1 m/d during operation. The main objective of the study was to compare the performance and microbial population dynamics under different SRTs in this process. The results of reactors with SRTs of about 10 and 30 days have shown very good effluent quality without any clogging problem for more than 4 months of operation. For the reactor with long SRT (75 days), the filter clogging was observed after about 80 days of operation and caused an increase in the operation pressure and deterioration in effluent quality on some days. Excessive abundance of filamentous bacteria was observed in the reactor with SRT of about 10 days, which had the best effluent quality. According to the FISH results, type 021N was predominant in the reactor with long SRT, which had the clogging problem. On the other hand, other reactors (with SRTs of about 10 and 30 days) did not contain much type 021N, but some other filamentous bacteria dominated. Maximum EPS concentration (as mg/L) was observed in the reactor with long SRT. Also the abundance of two types of metazoa (Pristina sp. and tardigrades) was observed in the reactor with long SRT, which had the clogging problem and poor effluent quality.
- 1 June 2003
- Published by IWA Publishing in Water Science & Technology
- Vol. 47 (12) , 73-80
Performance and microbial dynamics in the coarse pore filtration activated sludge process at different SRTs (solids retention times)
In this research, three SRTs (about 10, 30 and 75 days (without wasting the sludge except for sampling)) were applied to three reactors equipped with non-woven and coarse pore filter modules. The flux was adjusted to about 1 m/d during operation. The main objective of the study was to compare the performance and microbial population dynamics under different SRTs in this process. The results of reactors with SRTs of about 10 and 30 days have shown very good effluent quality without any clogging problem for more than 4 months of operation. For the reactor with long SRT (75 days), the filter clogging was observed after about 80 days of operation and caused an increase in the operation pressure and deterioration in effluent quality on some days. Excessive abundance of filamentous bacteria was observed in the reactor with SRT of about 10 days, which had the best effluent quality. According to the FISH results, type 021N was predominant in the reactor with long SRT, which had the clogging problem. On the other hand, other reactors (with SRTs of about 10 and 30 days) did not contain much type 021N, but some other filamentous bacteria dominated. Maximum EPS concentration (as mg/L) was observed in the reactor with long SRT. Also the abundance of two types of metazoa (Pristina sp. and tardigrades) was observed in the reactor with long SRT, which had the clogging problem and poor effluent quality.
- 29 November 2002
- Published by Wiley
Production of Polyhydroxyalkanoates from Activated Sludge