TGTom Gallagher

Tom Gallagher

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tom Gallagher has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High Throughput Screening of Elite Loblolly Pine Families for Chemical and Bioenergy Traits with Near Infrared Spectroscopy

    by Gifty E. Acquah, Brian K. Via, Tom Gallagher, Nedret Billor, Oladiran O. Fasina, Lori G. Eckhardt

    Pinus taeda L. (loblolly pine) dominates 13.4 million ha of US southeastern forests and contributes over $30 billion to the economy of the region. The species will also form an important component of the renewable energy portfolio as the United States seeks national and energy security as well as environmental sustainability. This study employed NIR-based chemometric models as a high throughput screening tool to estimate the chemical traits and bioenergy potential of 351 standing loblolly pine trees representing 14 elite genetic families planted on two forest sites. The genotype of loblolly pine families affected the chemical, proximate and energy traits studied. With a range of 36.7% to 42.0%, the largest genetic variation (p-value < 0.0001) was detected in the cellulose content. Furthermore, although family by site interactions were significant for all traits, cellulose was the most stable across the two sites. Considering that cellulose content has strong correlations with other properties, selecting and breeding for cellulose could generate some gains.


  • Application of a Small-Scale Equipment System for Biomass Harvesting

    by Aihua Yu, Tom Gallagher, Dana Mitchell, Brandon O’neal


  • High Tonnage Forest Biomass Production Systems from Southern Pine Energy Plantations

    by Steve Taylor, Corley Land Services Usda Forest Service, Timothy McDonald, Oladiran Fasina, Tom Gallagher, Mathew Smidt, Dana Mitchell, John Klepac, Jason Thompson, Wes Sprinkle, et al.

    In this study, a high-tonnage harvesting system designed specifically to operate efficiently in the expected stand types of a bioenergy scenario was built, deployed, and evaluated in a production setting. Stands on which the system was evaluated exhibited the heavy stocking levels (> 600 stems per acre) and tree size distributions with significant volume in small stems (down to 2” DBH) that were expected in the modified energy plantation silvicultural approach. The harvest system also was designed to be functional in the traditional plantation stands dominating the commercial forestry landscape in the region. The Tigercat 845D feller buncher, which was a prototype machine designed for the high tonnage harvest system, used a boom-mounted prototype DT1802 shear felling head and incorporated a number of options intended to maximize its small-stem productivity, including: a high-speed shear severing system that was cheaper to operate than a saw; a large-pocket felling head that allowed larger accumulations of small stems to be built before expending the time to drop them for the skidder; efficient, low ground pressure, tracked carrier system to decrease the amount of maneuvering, saving time and minimizing soil disturbance; and various energy-saving devices to lower fuel costs and minimize air quality impacts.more » Overall, the feller buncher represented a quantum advance in small-stem harvesting technology. Extensive testing showed the machine’s production rate to be relatively insensitive to piece size, much less so than comparable traditional equipment. In plantation stands, the feller buncher was able to produce approximately 100 green tons of biomass per productive machine hour (PMH), and in natural stands, it produced nearly 120 green tons per PMH. The ability of the high tonnage feller buncher to maintain high productivity in stands with smaller diameter stems is something that has not been achieved in previous feller buncher designs. The Tigercat 845D feller buncher is now a production machine for Tigercat and is being sold in their current product line. The high-speed felling system was paired with a Tigercat 630D skidder and high-capacity grapple; one that could match the felling productivity when pulling small stems. The harvesting system minimized hourly costs using a single, high-capacity skidder (with a single operator), rather than two smaller ones, which is the traditional practice. The skidder itself can be considered a mid-range size and had an engine no larger than other machines in its class, but it incorporated a very large capacity 25 ft2 grapple. The large grapple is well suited to grabbing and hauling a large bunch of small-diameter trees, as produced by the high tonnage feller buncher. The grapple worked effectively in larger stems as well, but its ability to carry large numbers of small stems meant the average payload did not drop as stand DBH decreased. Tests with the machine indicated its travel speeds were nearly the same as, or perhaps slightly better than, conventionally equipped skidders, but grapple capacity was 75% larger. Productivity and cost per ton of the new skidder were better than conventional skidders for average skid distances of any length greater than 100 feet. Measured skidder productivity was as high as 143 gt/PMH. Its productivity exceeded that of the high-capacity feller buncher for skid distances out to nearly 700 feet, so system productivity could be expected to remain high for stands of a size typical in the southern U.S. The Tigercat 630D skidder is a production machine for Tigercat and the large grapple can now be ordered by customers using it for small diameter trees. When the feller buncher and skidder are analyzed as a two-machine system, overall productivity is fixed at the level of the least productive machine. Results from a set of side-by-side tests in the same density stand with conventional feller bunchers and skidders showed that the high tonnage system produced 97 gt/PMH versus 68 gt/PMH for a comparable conventional system. Machine rate costs for felling and skidding were $2.31/gt and $3.72/gt for the high tonnage, and conventional systems, respectively. However, the most significant result of the project is that the high tonnage system was shown to be relatively insensitive to tree size. This ability to maintain felling and skidding productivity and cost as tree size decreases is a breakthrough in harvesting systems for southern pine plantations. The concept of transpirational drying of woody biomass was tested at an industrial scale at multiple locations during this project. Felled trees were allowed to dry in two scenarios: 1) in bunches where they were felled, and 2) in roadside piles. Although the wood piled in large piles at roadside did experience drying, the wood left in bunches experienced a greater moisture reduction. Drying times of 72 days in the late summer resulted in mean wood moisture content of 26% for skidder bunches and 39% for the large pile at roadside as compared to moisture contents of 55% to 58% for freshly cut trees. An existing whole-tree chipper, Precision 2675, was modified to allow production of chips smaller than the traditional pulp size chip (i.e. “microchips”). Feed rates and knife placements were retained in the new design, while additional pockets were incorporated in the chipper disk to allow the attachment of either four knives for pulp chips or eight knives for microchips. This design facilitated switching between the energy and pulp chip product options at relatively low expense (about ½ day downtime). Chipping of whole-trees into pulp chips and microchips with the Precision 2675 disk chipper resulted in average productivities of 79.5 gt/PMH and 70.7 gt/PMH, respectively. Production rates of the chipper were lower when producing microchips by about 10% relative to producing pulp chips, but rates were similar to those achievable when making clean...


  • Implementing residue chippers on harvesting operations in the southeastern US for biomass recovery

    by Patrick Jernigan, Tom Gallagher, Jaspreet Aulakh, Robert Tufts, Tim McDonald

    Implementing small residue chippers on conventional feller-buncher, skidder, and knuckleboom loader logging operations was studied in 2006 and 2007. A thinning operation fed the chipper using the same loader that handled roundwood sorting and loading, while a clearcut operation used a separate loader with the chipper. Both operations used set-out trailers to improve transportation efficiency. Production was evaluated for 65 weeks on the thinning operation and 42 weeks on the clearcut operation. Costs for producing and delivering the biomass material were estimated using an after-tax cash-flow method. The thinning operation produced an average of 32 metric tonnes (35 American tons) of biomass per day (SD: 20 tonnes and 22 tons, respectively), at an estimated cost of $18.38 per tonne delivered ($16.71/ton). The clearcut operation averaged 50 tonnes (55 tons) of biomass per day (SD: 19 tonnes and 21 tons), at a cost of $17.81/tonne ($16.19/ton). The biomass produced contained about 75% wood, with the remaining material consisting of bark, needles, and twigs. Implementing a residue chipper on a conventional operation can be economically feasible for producing biomass for an alternative fuels market, provided that it does not interfere with roundwood production. Set-out trucking aids the operation by minimizing the delay time for trucks.


  • A New Slash Bundling Concept for Use in a Southern US Logging System

    by Steven Meadows, Tom Gallagher, Dana Mitchell

    John Deere's biomass bundler unit is an effective machine for harvesting forest residues, which can be used as a source of fuelwood and/or a feedstock for biofuel production. This project explored an avenue that could supply a promising source of readily available energy in southeastern forested lands. Typical southern harvesting operations consist of whole-tree harvesting in which trees are felled and then skidded to a landing. Limbs and tops are usually either deposited over the landscape or piled in windrows. The biomass bundler captures the otherwise nonmerchantable material and maximizes the marketability of the entire tree. In order to reduce costs, maximize efficiency, and implement the bundler in a tree-length harvesting operation, this project tested a prototype harvesting system. This venture (1) adapted the John Deere B380 bundler unit to a motorized trailer, (2) designed an optimum landing configuration, and (3) conducted a productivity study of the bundler unit. The unit produced 13.2 tonnes per productive machine hour (PMH; 14.6 tons/PMH) of 250-cm bundles and 14.9 tonnes/PMH (16.4 tons/PMH) of 350-cm bundles, assuming minor delays at a cost of $12.50 to $14.20/tonne ($11.25 to $12.85/ton).