Christine Mottet
Research Subjects
Christine Mottet has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
J. Goniakowski
INSP, Campus de Boucicaut, 140 rue de Lourmel, 75015 Paris, France
2 shared publicationsA. Ouahab
CRMCN-CNRS, Campus de Luminy, Case 913, 13288 Marseille Cedex 9, France
1 shared publicationAnnick Loiseau
Laboratory for Microstructural Investigations—ONERA-CNRS, B.P., 92322 Châtillon, France
1 shared publicationChristian Ricolleau
Laboratory Materials and Quantum Phenomena, University Paris 7, 2 Place Jussieu, Paris, France
1 shared publication- Cyril Langlois
INSA Lyon, CNRS, Univ Claude Bernard Lyon 1, MATEIS, UMR5510 , 7 avenue Jean Capelle, Villeurbanne 69621
1 shared publication D. Sayers
Department of Physics, North Carolina State University, 27695, Raleigh, North Carolina - United States
1 shared publication
Latest Publications
- 28 September 2007
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 138, 193-210
Structure and chemical ordering in CoPt nanoalloys
The structure and chemical ordering of CoPt nanoclusters in the size range of 1 to 3 nm are investigated by global optimization methods and Monte Carlo simulations using a many body potential derived from the tight binding model. For the smaller systems (number of atoms N < 100), the optimized clusters display a polyicosahedral-like atomic structure with a little core-shell chemical ordering characterized by a particular surface chemical configuration: some pentagonal or hexagonal Pt rings centered, respectively on a Co atom or a Co dimer. A transition to the decahedral symmetry occurs at about N = 100 atoms, with a pseudo L10 ordered phase in each tetrahedral unit. For larger cluster sizes, 201 < N < 1289, the L10-ordered/disordered transition on the face centered cubic truncated octahedron is studied by canonical Monte Carlo simulations showing that the critical disordering temperature decreases with the cluster size. We also notice a Co surface segregation especially at edges and, possibly, (100) facets, depending on the cluster size, on both cubic and fivefold symmetry structures.
- 28 September 2007
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 138, 193-210
Structure and chemical ordering in CoPt nanoalloys
The structure and chemical ordering of CoPt nanoclusters in the size range of 1 to 3 nm are investigated by global optimization methods and Monte Carlo simulations using a many body potential derived from the tight binding model. For the smaller systems (number of atoms N < 100), the optimized clusters display a polyicosahedral-like atomic structure with a little core-shell chemical ordering characterized by a particular surface chemical configuration: some pentagonal or hexagonal Pt rings centered, respectively on a Co atom or a Co dimer. A transition to the decahedral symmetry occurs at about N = 100 atoms, with a pseudo L10 ordered phase in each tetrahedral unit. For larger cluster sizes, 201 < N < 1289, the L10-ordered/disordered transition on the face centered cubic truncated octahedron is studied by canonical Monte Carlo simulations showing that the critical disordering temperature decreases with the cluster size. We also notice a Co surface segregation especially at edges and, possibly, (100) facets, depending on the cluster size, on both cubic and fivefold symmetry structures.
- Top Cited Papers
- 21 September 2007
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 138, 375-391
Growth and structural properties of CuAg and CoPt bimetallic nanoparticles
Core/shell CuAg and alloyed CoPt have been synthesized using two vapor phase deposition techniques. For CuAg prepared by Thermal Evaporation (TE), the size and the morphology of the Cu cores are the key parameters to promote the formation of the core/shell arrangement. For CoPt synthesized by Pulsed Laser Deposition (PLD), the growth kinetics of nanoparticles, depending on the deposition rate, the substrate nature and the temperature, controls the nanoparticle morphology. The competition between the growth and the ordering kinetics governs the nanoparticle structure. By reducing the growth kinetics, as-grown L10 ordered nanoparticles are obtained according to the bulk phase diagram.
- 21 September 2007
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 138, 375-391
Top Cited PapersGrowth and structural properties of CuAg and CoPt bimetallic nanoparticles
Core/shell CuAg and alloyed CoPt have been synthesized using two vapor phase deposition techniques. For CuAg prepared by Thermal Evaporation (TE), the size and the morphology of the Cu cores are the key parameters to promote the formation of the core/shell arrangement. For CoPt synthesized by Pulsed Laser Deposition (PLD), the growth kinetics of nanoparticles, depending on the deposition rate, the substrate nature and the temperature, controls the nanoparticle morphology. The competition between the growth and the ordering kinetics governs the nanoparticle structure. By reducing the growth kinetics, as-grown L10 ordered nanoparticles are obtained according to the bulk phase diagram.
- Open Access
- 1 September 2006
- Published by EDP Sciences in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
- Vol. 61 (5) , 677-689
Combining Solid State Physics Concepts and X-Ray Absorption Spectroscopy to Understand DeNOx Catalysis
Considering the NO adsorption process, starting from theoretical considerations, evaluation of the variation of the properties of metallic clusters versus their size and composition leads to a prediction of the NO adsorption mode on these nanoentities. Then, based on experimental results obtained mostly through X-ray absorption spectroscopy, we have connected the adsorption mode of the molecule to the behaviour of the metallic cluster following the adsorption process. A simple hypothesis leads us to discuss the catalytic activity of nanometer scale metallic clusters following NO adsorption. Partant des considérations théoriques, l'évaluation de la variation des propriétés d'agrégats métalliques en fonction de leur taille et leur composition mène à une prédiction du mode d'adsorption du NO sur ces nanoentités. En nous appuyant sur les résultats expérimentaux obtenus surtout par la spectroscopie d'absorption de rayons X, nous proposons de lier le mode d'adsorption de la molécule au comportement de l'agrégat métallique suite à l'adsorption. Une hypothèse simple nous mène à envisager une interprétation de l'activité catalytique d'agrégats métalliques nanométriques lors de l'adsorption du NO.
- 1 September 2006
- Published by EDP Sciences in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles
- Vol. 61 (5) , 677-689
Open AccessCombining Solid State Physics Concepts and X-Ray Absorption Spectroscopy to Understand DeNOx Catalysis
Considering the NO adsorption process, starting from theoretical considerations, evaluation of the variation of the properties of metallic clusters versus their size and composition leads to a prediction of the NO adsorption mode on these nanoentities. Then, based on experimental results obtained mostly through X-ray absorption spectroscopy, we have connected the adsorption mode of the molecule to the behaviour of the metallic cluster following the adsorption process. A simple hypothesis leads us to discuss the catalytic activity of nanometer scale metallic clusters following NO adsorption. Partant des considérations théoriques, l'évaluation de la variation des propriétés d'agrégats métalliques en fonction de leur taille et leur composition mène à une prédiction du mode d'adsorption du NO sur ces nanoentités. En nous appuyant sur les résultats expérimentaux obtenus surtout par la spectroscopie d'absorption de rayons X, nous proposons de lier le mode d'adsorption de la molécule au comportement de l'agrégat métallique suite à l'adsorption. Une hypothèse simple nous mène à envisager une interprétation de l'activité catalytique d'agrégats métalliques nanométriques lors de l'adsorption du NO.
- 8 July 2005
- Published by American Physical Society (APS) in Physical Review B
- Vol. 72 (3) , 035421
Atomistic simulation of Ag thin films on MgO(100) substrate: A template substrate for heterogeneous adsorption
The nanostructuration of Ag thin films deposited on the MgO(100) substrate is simulated by classical molecular dynamics using a tight-binding many-body potential for the metal-metal bonds and a potential fitted to ab initio calculations for the metal–oxide ones. Due to the lattice mismatch between the Ag deposit and the MgO(100) substrate, the silver film is strained. The stress is partially released by the introduction of misfit dislocations at the interface. These dislocations form a network with a periodicity of about 10 nm, which varies for ultrathin films according to the film thickness. The strain induced by the interfacial dislocation cores propagates across the silver film up to the surface driving to the nanostructuration of the surface. The atomistic results are compared to the predictions of the elasticity theory. The theoretical results are in a nice agreement with recent experiments obtained by grazing incidence small angle x-ray scattering revealing a self-organization of Co clusters adsorbed on a thin film of [F. Leroy, G. Renaud, A. Letoublon, R. Lazzari, C. Mottet and J. Goniakowski (unpublished)]. We show that the preferential Co adsorption site is obtained on top of tensile surface sites and that the periodicity of the clusters’ self-organization can be tuned by the Ag film thickness.- 8 July 2005
- Published by American Physical Society (APS) in Physical Review B
- Vol. 72 (3) , 035421
Atomistic simulation of Ag thin films on MgO(100) substrate: A template substrate for heterogeneous adsorption
The nanostructuration of Ag thin films deposited on the MgO(100) substrate is simulated by classical molecular dynamics using a tight-binding many-body potential for the metal-metal bonds and a potential fitted to ab initio calculations for the metal–oxide ones. Due to the lattice mismatch between the Ag deposit and the MgO(100) substrate, the silver film is strained. The stress is partially released by the introduction of misfit dislocations at the interface. These dislocations form a network with a periodicity of about 10 nm, which varies for ultrathin films according to the film thickness. The strain induced by the interfacial dislocation cores propagates across the silver film up to the surface driving to the nanostructuration of the surface. The atomistic results are compared to the predictions of the elasticity theory. The theoretical results are in a nice agreement with recent experiments obtained by grazing incidence small angle x-ray scattering revealing a self-organization of Co clusters adsorbed on a thin film of [F. Leroy, G. Renaud, A. Letoublon, R. Lazzari, C. Mottet and J. Goniakowski (unpublished)]. We show that the preferential Co adsorption site is obtained on top of tensile surface sites and that the periodicity of the clusters’ self-organization can be tuned by the Ag film thickness.- 20 September 2004
- Published by Elsevier in Surface Science
- Vol. 566-568, 443-450
Melting and freezing of Pd nanoclusters: effect of the MgO(100) substrate
- 20 September 2004
- Published by Elsevier in Surface Science
- Vol. 566-568, 443-450
Melting and freezing of Pd nanoclusters: effect of the MgO(100) substrate