Salah Sukkarieh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Salah Sukkarieh has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Mitch Bryson
ARC Centre of Excellence in Autonomous Systems, ACFR, University of Sydney. NSW 2006, Australia
3 shared publications - Alberto Sanfeliu
Universitat Politecnica de Catalunya
1 shared publication - Ali Haydar Göktoğan
ARC Centre of Excellence for Autonomous Systems, Australian Centre for Field Robotics, The University of Sydney, Sydney, NSW, Australia 2006
1 shared publication - David T. Cole
ARC Centre of Excellence for Autonomous Systems, Australian Centre for Field Robotics, The University of Sydney, Sydney, NSW, Australia 2006
1 shared publication - Juan Andrade-Cetto
CSIC-UPC
1 shared publication - Juan Domingo Tardos
Universidad de Zaragoza
1 shared publication
Latest Publications
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 4114-4119
On the Observability of Bearing-only SLAM
In this paper we present an observability analysis for a mobile robot performing SLAM with a single monocular camera. The aim is to get a better understanding of the well known intuitive behavior of these systems, such as the need for triangulation to features from different positions in order to get accurate relative pose estimates. The characterisation of the unobservable directions is made using the nullspace basis of the stripped observability matrix. This allows us to identify which vehicle motions are required to maximise the number of observable states in the system, which in turn affects accuracy in the estimation process. The analysis is performed by modelling the system in the continuous time domain as piecewise constant. Simulation results using an extended information filter are shown to verify the results of the observability analysis.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 4114-4119
On the Observability of Bearing-only SLAM
In this paper we present an observability analysis for a mobile robot performing SLAM with a single monocular camera. The aim is to get a better understanding of the well known intuitive behavior of these systems, such as the need for triangulation to features from different positions in order to get accurate relative pose estimates. The characterisation of the unobservable directions is made using the nullspace basis of the stripped observability matrix. This allows us to identify which vehicle motions are required to maximise the number of observable states in the system, which in turn affects accuracy in the estimation process. The analysis is performed by modelling the system in the continuous time domain as piecewise constant. Simulation results using an extended information filter are shown to verify the results of the observability analysis.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 2797-2802
Inertial Aiding of Inverse Depth SLAM using a Monocular Camera
This paper presents the benefits of using a low cost inertial measurement unit to aid in an implementation of inverse depth initialized SLAM using a hand-held monocular camera. Results are presented with and without inertial observations for different assumed initial ranges to features on the same dataset. When using only the camera, the scale of the scene is not observable. As expected, the scale of the map depends on the prior used to initialize the depth of the features and may drift when exploring new terrain, precluding loop closure. The results show that the inertial observations help to improve the estimated trajectory of the camera leading to a better estimation of the map scale and a more accurate localization of features.
- 1 April 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (cat. No.01ch37164)
- No. 10504729,p. 2797-2802
Inertial Aiding of Inverse Depth SLAM using a Monocular Camera
This paper presents the benefits of using a low cost inertial measurement unit to aid in an implementation of inverse depth initialized SLAM using a hand-held monocular camera. Results are presented with and without inertial observations for different assumed initial ranges to features on the same dataset. When using only the camera, the scale of the scene is not observable. As expected, the scale of the map depends on the prior used to initialize the depth of the features and may drift when exploring new terrain, precluding loop closure. The results show that the inertial observations help to improve the estimated trajectory of the camera leading to a better estimation of the map scale and a more accurate localization of features.
- 1 January 2007
- Published by Wiley in Journal of Field Robotics
- Vol. 24 (1-2) , 113-143
Building a Robust Implementation of Bearing‐only Inertial SLAM for a UAV
This paper presents the on‐going design and implementation of a robust inertial sensor based simultaneous localization and mapping (SLAM) algorithm for an unmanned aerial vehicle (UAV) using bearing‐only observations. A single color vision camera is used to observe the terrain from which image points corresponding to features in the environment are extracted. The SLAM algorithm estimates the complete six degrees‐of‐freedom motion of the UAV along with the three‐dimensional position of the features in the environment. An extended Kalman filter approach is used where a technique of delayed initialization is performed to initialize the three‐dimensional position of features from bearing‐only observations. Data association is achieved using a multihypothesis innovation gate based on the spatial uncertainty of each feature. Results are presented by running the algorithm off‐line using inertial sensor and vision data collected during a flight test of a UAV.
- 1 January 2007
- Published by Wiley in Journal of Field Robotics
- Vol. 24 (1-2) , 113-143
Building a Robust Implementation of Bearing‐only Inertial SLAM for a UAV
This paper presents the on‐going design and implementation of a robust inertial sensor based simultaneous localization and mapping (SLAM) algorithm for an unmanned aerial vehicle (UAV) using bearing‐only observations. A single color vision camera is used to observe the terrain from which image points corresponding to features in the environment are extracted. The SLAM algorithm estimates the complete six degrees‐of‐freedom motion of the UAV along with the three‐dimensional position of the features in the environment. An extended Kalman filter approach is used where a technique of delayed initialization is performed to initialize the three‐dimensional position of features from bearing‐only observations. Data association is achieved using a multihypothesis innovation gate based on the spatial uncertainty of each feature. Results are presented by running the algorithm off‐line using inertial sensor and vision data collected during a flight test of a UAV.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1 (1095323X) , 1-12
Co-operative Localisation and Mapping for Multiple UAVs in Unknown Environments
In this paper we demonstrate a co-operative path-planning algorithm for multi-vehicle simultaneous localisation and mapping (SLAM) that uses information-based measures to maximize the accuracy of a feature map which is constructed from terrain observation made by each vehicle. The SLAM algorithm is distributed amongst the vehicles where each vehicle shares locally built map information via a central communications node. This information is used to assist in localisation which in turn increases the accuracy of the map information each vehicle provides. Each vehicle communicates to the central node potential trajectories it can take and the associated map information it will provide. The central communications node then co-ordinates the actions of each platform such as to maximise the accuracy of the globally constructed map. The vehicles each perform SLAM using a combination of on-board inertial sensors and an on-board terrain sensor. Results are presented using a 6-DoF simulation of several UAVs over an initially unexplored terrain.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1 (1095323X) , 1-12
Co-operative Localisation and Mapping for Multiple UAVs in Unknown Environments
In this paper we demonstrate a co-operative path-planning algorithm for multi-vehicle simultaneous localisation and mapping (SLAM) that uses information-based measures to maximize the accuracy of a feature map which is constructed from terrain observation made by each vehicle. The SLAM algorithm is distributed amongst the vehicles where each vehicle shares locally built map information via a central communications node. This information is used to assist in localisation which in turn increases the accuracy of the map information each vehicle provides. Each vehicle communicates to the central node potential trajectories it can take and the associated map information it will provide. The central communications node then co-ordinates the actions of each platform such as to maximise the accuracy of the globally constructed map. The vehicles each perform SLAM using a combination of on-board inertial sensors and an on-board terrain sensor. Results are presented using a 6-DoF simulation of several UAVs over an initially unexplored terrain.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 1-12
Camera Aided Inertial Navigation in Poor GPS Environments
This paper presents a framework for robust localization suitable to unmanned systems operating in environments that have limited or unreliable access to external localization information, such as GPS. The core algorithm presented is a recasting of the Simultaneous Localization and Mapping (SLAM) technique from the robotics literature as an aid to inertial navigation. A single camera is used to track unknown environment features providing a consistent constraint on inertial sensor drift while global localization information is unavailable. Results from an unmanned flight vehicle, performing a tracking and surveillance task with unreliable GPS are presented.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 1-12
Camera Aided Inertial Navigation in Poor GPS Environments
This paper presents a framework for robust localization suitable to unmanned systems operating in environments that have limited or unreliable access to external localization information, such as GPS. The core algorithm presented is a recasting of the Simultaneous Localization and Mapping (SLAM) technique from the robotics literature as an aid to inertial navigation. A single camera is used to track unknown environment features providing a consistent constraint on inertial sensor drift while global localization information is unavailable. Results from an unmanned flight vehicle, performing a tracking and surveillance task with unreliable GPS are presented.
- 1 June 2006
- Published by Wiley in Journal of Field Robotics
- Vol. 23 (6-7) , 417-440
System development and demonstration of a UAV control architecture for information gathering missions
This paper presents a system architecture for unmanned aerial vehicles (UAVs) performing information gathering missions. Particular focus in this paper is on the development of the architecture from algorithms to simulation, hardware‐in‐the‐loop testing and flight demonstrations. The architecture has been developed for a team of Brumby Mk 3 fixed wing UAVs. Results from recent flight demonstrations are presented in which a single UAV validated a path‐following guidance algorithm for feature orbiting, and a utility‐based dynamic path planning algorithm applied to a feature tracking problem. The architecture has also been designed to accommodate the use of multiple UAVs, and future work on a team approach to the problem is presented.
- 1 June 2006
- Published by Wiley in Journal of Field Robotics
- Vol. 23 (6-7) , 417-440
System development and demonstration of a UAV control architecture for information gathering missions
This paper presents a system architecture for unmanned aerial vehicles (UAVs) performing information gathering missions. Particular focus in this paper is on the development of the architecture from algorithms to simulation, hardware‐in‐the‐loop testing and flight demonstrations. The architecture has been developed for a team of Brumby Mk 3 fixed wing UAVs. Results from recent flight demonstrations are presented in which a single UAV validated a path‐following guidance algorithm for feature orbiting, and a utility‐based dynamic path planning algorithm applied to a feature tracking problem. The architecture has also been designed to accommodate the use of multiple UAVs, and future work on a team approach to the problem is presented.