THTorunn Thauland Håseth

Torunn Thauland Håseth

*This is an algorithmically generated author record based on publicly available information.

Torunn Thauland Håseth has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Correction: Grabež et al. Seaweed Inclusion in Finishing Lamb Diet Promotes Changes in Micronutrient Content and Flavour-Related Compounds of Raw Meat and Dry-Cured Leg (Fenalår). Foods 2022, 11, 1043

    by Vladana Grabež, Elena Coll-Brasas, Elena Fulladosa, Elin Hallenstvedt, Torunn Thauland Håseth, Margareth Øverland, Per Berg, Alemayehu Kidane, Bjørg Egelandsdal

    “Alemayehu Kidane” was not included as an author in the original publication


  • Open Access

    Seaweed Inclusion in Finishing Lamb Diet Promotes Changes in Micronutrient Content and Flavour-Related Compounds of Raw Meat and Dry-Cured Leg (Fenalår)

    by Vladana Grabež, Elena Coll-Brasas, Elena Fulladosa, Elin Hallenstvedt, Torunn Thauland Håseth, Margareth Øverland, Per Berg, Alemayehu Kidane, Bjørg Egelandsdal

    Innovative feeding strategies tend to improve the quality properties of raw material and dry-cured products. In the present study, Norwegian White female lambs (n = 24) were finished during 35 days on three different diets: control (CD), control supplemented with seaweed (5% DM) (SD), and pasture (PD). The quality of raw meat (Semimembranosus + Adductor) and deboned dry-cured lamb leg (fenalår; n = 24) was studied. The heme, SFA, MUFA, and PUFA content in raw meat was not affected with finishing diet. The SD significantly increased the selenium, iodine, and arsenic content in raw meat and in the dry-cured leg the iodine and arsenic. The dry-cured leg from SD-lamb had the highest amount of iodine with 130 µg I/100 g which corresponds to 60% of Adequate Intake. Aldehydes, ketones, and esters in raw meat and dry-cured lamb leg were significantly affected by finishing diet; CD showed increased esters in raw meat and aldehydes in the dry-cured leg compared to SD and PD. The significantly higher content of simple sugars, mannose being the most dominant, was found in the dry-cured leg from SD-lamb compared to CD and PD. Finishing diets had no effect on the taste profile of dry-cured lamb leg. This study showed the potential of seaweed in iodine biofortification of lamb meat and dry-cured products. Iodine-rich meat products should reduce iodine-deficiency among humans.


  • Nondestructive Analysis of Salt, Water, and Protein in Dried Salted Cod using Computed Tomography

    by T.T. Håseth, M. Høy, B. Egelandsdal, O. Sørheim

    ABSTRACT:  Computed X‐ray tomography (CT) was used to determine NaCl, water, and protein levels in dried salted cod. Cod fillets were salted and dried, and CT was conducted several times during the process. Also, homogenized cod samples with a chemical composition covering the typical composition of cod during salting and drying were produced, and CT scanned. Chemical composition of fillet and model samples was predicted from CT images acquired at 80, 110, and 130 kV. The best average prediction errors (RMSECV) obtained for homogenized samples were 0.6% NaCl, 1.3% water, and 1.5% protein; all explained variances were R 2 = 0.99 or above. The best RMSECVs and explained variances for cod fillet samples were 0.9% NaCl ( R 2 = 0.96), 0.8% water ( R 2 = 0.99), and 1.4% protein ( R 2 = 0.79). Combining CT values from 2 or 3 voltages gave the best predictions except when predicting salt in cod fillet, where 1 voltage was sufficient.


  • Determination of Sodium Chloride in Pork Meat by Computed Tomography at Different Voltages

    by T.T. Håseth, M. Høy, J. Kongsro, A. Kohler, O. Sørheim, B. Egelandsdal

    ABSTRACT:  Ground pork samples simulating the widely different chemical composition of hams during dry‐cured ham production were produced and scanned by x‐ray computed tomography (CT). Chemical composition accounted for most of the variation in CT values (97%). Tube voltage (80, 110, and 130 kV) affected CT value and the effect varied between different types of tissue. Sodium chloride (NaCl) was predicted in the ground samples with average prediction errors (RMSEP) as low as 0.2% to 1.0% NaCl. NaCl was also predicted in small samples of raw to dry‐cured ham. When dry and fat ham samples were left out of the models, NaCl was predicted with a high precision (RMSEP 0.2% to 0.4% NaCl, R 2 > 0.99). CT can be used as a valuable, nondestructive tool to analyze distribution of and quantify NaCl in ham during dry‐curing.


  • Computed Tomography for Quantitative Determination of Sodium Chloride in Ground Pork and Dry‐Cured Hams

    by T.T. Håseth, B. Egelandsdal, F. Bjerke, O. Sørheim

    ABSTRACT:  Seventy‐five ground meat and fat samples of pork with varying composition of sodium chloride (0% to 16%), fat (1% to 82%), protein (1% to 46%), and water (13% to 76%) were scanned by X‐ray computed tomography (CT) at 110 kV. The dependency of CT value on chemical composition and the linear relationships between sodium chloride (NaCl) and CT value were modeled. When all ground samples were used for modeling and no information of chemical composition was included in the model, the prediction error for NaCl was 2.8%. Adding information on fat or protein content to the model reduced the error to 1.6%. A minimal prediction error of 0.2% for NaCl was found when the variation in chemical composition was strongly reduced. In addition, 22 samples of dry‐cured ham lean and fat tissues at different processing stages were CT scanned; their chemical compositions were 0% to 14% NaCl, 1% to 85% fat, 5% to 33% protein, and 7% to 76% water. The NaCl content in dry‐cured ham samples was modeled with prediction errors of 0.6% to 2.1%, depending on which chemical component was included in the models. In general, predictions were improved if either the range of concentrations was reduced or information of chemical composition was included in the models. Important sources of error in the models were the reproduction error for ground samples, and for ham samples the analytical errors in determining the chemical composition.