Masanori Iye
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Masanori Iye has a total of 411 co-authors. Here are the top co-authors by number of shared publications:
Yutaka Hayano
Subaru Telescope, National Astronomical Observatory of Japan, 650 North A'ohoku Place, Hilo, HI 96720, USA
22 shared publications- Hideki Takami
Subaru Telescope, National Astronomical Observatory of Japan (United States)
20 shared publications - Olivier Guyon
University of Arizona
15 shared publications - Shin Oya
Subaru Telescope, National Astronomical Observatory of Japan (United States)
15 shared publications Masayuki Hattori
National Astronomical Observatory of Japan/Subaru Telescope (United States)
14 shared publications- Naruhisa Takato
Subaru Telescope, National Astronomical Observatory of Japan (United States)
13 shared publications
Latest Publications
- 29 April 2015
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 15 (5) , 673-686
High resolution deep imaging of a bright radio quiet QSO atz~ 3
We have obtained deep J and Ks-band images centered on a bright radio quiet QSO UM 402 (zem = 2.856) using the IRCS camera and adaptive optics systems that are part of the Subaru Telescope, as well as retrieved WFC3/F140W archive images of this object. A faint galaxy (mk = 23.32±0.05 in the Vega magnitude system) that lies ~ 2.4'' north of the QSO sightline has been clearly resolved in all three deep high resolution datasets, and appears as an irregular galaxy with two close components in the Ks-band images (separation ~ 0.3''). Given the small impact parameter (b = 19.6 kpc, at zlls = 2.531), as well as the red color of (J - Ks)Vega ~ 1.6, it might be a candidate galaxy giving rise to the Lyman Limit system absorption at zabs = 2.531 seen in the QSO spectrum. After carefully subtracting the point spread function from the QSO images, the host galaxy of this bright radio quiet QSO at z ~ 3 was marginally revealed. We placed a lower limit on the host component of mk ~ 23.3 according to our analyses.
- 29 April 2015
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 15 (5) , 673-686
High resolution deep imaging of a bright radio quiet QSO atz~ 3
We have obtained deep J and Ks-band images centered on a bright radio quiet QSO UM 402 (zem = 2.856) using the IRCS camera and adaptive optics systems that are part of the Subaru Telescope, as well as retrieved WFC3/F140W archive images of this object. A faint galaxy (mk = 23.32±0.05 in the Vega magnitude system) that lies ~ 2.4'' north of the QSO sightline has been clearly resolved in all three deep high resolution datasets, and appears as an irregular galaxy with two close components in the Ks-band images (separation ~ 0.3''). Given the small impact parameter (b = 19.6 kpc, at zlls = 2.531), as well as the red color of (J - Ks)Vega ~ 1.6, it might be a candidate galaxy giving rise to the Lyman Limit system absorption at zabs = 2.531 seen in the QSO spectrum. After carefully subtracting the point spread function from the QSO images, the host galaxy of this bright radio quiet QSO at z ~ 3 was marginally revealed. We placed a lower limit on the host component of mk ~ 23.3 according to our analyses.
- 29 October 2014
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 14 (11) , 1438-1446
Near-infrared polarimetry of the GG Tauri A binary system
A high angular resolution near-infrared image that shows the intensity of polarization for the GG Tau A binary system was obtained with the Subaru Telescope. The image shows a circumbinary disk scattering the light from the central binary. The azimuthal profile of the intensity of polarization for the circumbinary disk is roughly reproduced by a simple disk model with the Henyey-Greenstein phase function and the Rayleigh function, indicating there are small dust grains at the surface of the disk. Combined with a previous observation of the circumbinary disk, our image indicates that the gap structure in the circumbinary disk orbits counterclockwise, but material in the disk orbits clockwise. We propose that there is a shadow caused by material located between the central binary and the circumbinary disk. The separations and position angles of the stellar components of the binary in the past 20 yr are consistent with the binary orbit with a = 33.4 AU and e = 0.34.
- 29 October 2014
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 14 (11) , 1438-1446
Near-infrared polarimetry of the GG Tauri A binary system
A high angular resolution near-infrared image that shows the intensity of polarization for the GG Tau A binary system was obtained with the Subaru Telescope. The image shows a circumbinary disk scattering the light from the central binary. The azimuthal profile of the intensity of polarization for the circumbinary disk is roughly reproduced by a simple disk model with the Henyey-Greenstein phase function and the Rayleigh function, indicating there are small dust grains at the surface of the disk. Combined with a previous observation of the circumbinary disk, our image indicates that the gap structure in the circumbinary disk orbits counterclockwise, but material in the disk orbits clockwise. We propose that there is a shadow caused by material located between the central binary and the circumbinary disk. The separations and position angles of the stellar components of the binary in the past 20 yr are consistent with the binary orbit with a = 33.4 AU and e = 0.34.
- 19 March 2013
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 767 (1) , 10
MAPPINGH-BAND SCATTERED LIGHT EMISSION IN THE MYSTERIOUS SR21 TRANSITIONAL DISK
We present the first near infrared (NIR) spatially resolved images of the circumstellar transitional disk around SR21. These images were obtained with the Subaru HiCIAO camera, adaptive optics, and the polarized differential imaging technique. We resolve the disk in scattered light at H-band for stellocentric 01 ≤ r ≤ 06 (12 r 75 AU). We compare our results with previously published spatially resolved 880 μm continuum Submillimeter Array images that show an inner r 36 AU cavity in SR21. Radiative transfer models reveal that the large disk depletion factor invoked to explain SR21's sub-mm cavity cannot be "universal" for all grain sizes. Even significantly more moderate depletions (δ = 0.1, 0.01 relative to an undepleted disk) than those that reproduce the sub-mm cavity (δ ~ 10–6) are inconsistent with our H-band images when they are assumed to carry over to small grains, suggesting that surface grains scattering in the NIR either survive or are generated by whatever mechanism is clearing the disk midplane. In fact, the radial polarized intensity profile of our H-band observations is smooth and steeply inwardly-increasing (r –3), with no evidence of a break at the 36 AU sub-mm cavity wall. We hypothesize that this profile is dominated by an optically thin disk envelope or atmosphere component. We also discuss the compatibility of our data with the previously postulated existence of a sub-stellar companion to SR21 at r ~ 10-20 AU, and find that we can neither exclude nor verify this scenario. This study demonstrates the power of multiwavelength imaging of transitional disks to inform modeling efforts, including the debate over precisely what physical mechanism is responsible for clearing these disks of their large midplane grains.
- 19 March 2013
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 767 (1) , 10
MAPPINGH-BAND SCATTERED LIGHT EMISSION IN THE MYSTERIOUS SR21 TRANSITIONAL DISK
We present the first near infrared (NIR) spatially resolved images of the circumstellar transitional disk around SR21. These images were obtained with the Subaru HiCIAO camera, adaptive optics, and the polarized differential imaging technique. We resolve the disk in scattered light at H-band for stellocentric 01 ≤ r ≤ 06 (12 r 75 AU). We compare our results with previously published spatially resolved 880 μm continuum Submillimeter Array images that show an inner r 36 AU cavity in SR21. Radiative transfer models reveal that the large disk depletion factor invoked to explain SR21's sub-mm cavity cannot be "universal" for all grain sizes. Even significantly more moderate depletions (δ = 0.1, 0.01 relative to an undepleted disk) than those that reproduce the sub-mm cavity (δ ~ 10–6) are inconsistent with our H-band images when they are assumed to carry over to small grains, suggesting that surface grains scattering in the NIR either survive or are generated by whatever mechanism is clearing the disk midplane. In fact, the radial polarized intensity profile of our H-band observations is smooth and steeply inwardly-increasing (r –3), with no evidence of a break at the 36 AU sub-mm cavity wall. We hypothesize that this profile is dominated by an optically thin disk envelope or atmosphere component. We also discuss the compatibility of our data with the previously postulated existence of a sub-stellar companion to SR21 at r ~ 10-20 AU, and find that we can neither exclude nor verify this scenario. This study demonstrates the power of multiwavelength imaging of transitional disks to inform modeling efforts, including the debate over precisely what physical mechanism is responsible for clearing these disks of their large midplane grains.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 77365H
Visible low-order wavefront sensor for the Subaru LGSAO system
The Subaru laser guide star adaptive optics system (AO188) was installed at the Nasmyth focus of the Subaru Telescope on October 2006 and it is in operation with the natural guide star (NGS) mode. The operation of the laser guide star (LGS) mode started on January 2010. A visible low-order wavefront sensor (LOWFS) was built to measure tip-tilt and defocus terms of wavefront by using a single NGS within a 2.7 arcmin diameter field when an LGS is used for high-order wavefront sensing with the 188-element curvature based wavefront sensor. This LOWFS is a 2 × 2 sub-aperture Shack-Hartmann sensor with 16 photon-counting avalanche photodiode (APD) modules. A 4×4-element lenslet array is located after the 2 × 2 sub-aperture Shack-Hartmann lenslet array and it is coupled with the APD modules through optical fibers. The field of view of the LOWFS is 4 arcsec in diameter. It has own guide star acquisition unit, acquisition and pupil cameras, and atmospheric dispersion corrector. We describe the design, construction, and integration of this low-order wavefront sensor.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 77365H
Visible low-order wavefront sensor for the Subaru LGSAO system
The Subaru laser guide star adaptive optics system (AO188) was installed at the Nasmyth focus of the Subaru Telescope on October 2006 and it is in operation with the natural guide star (NGS) mode. The operation of the laser guide star (LGS) mode started on January 2010. A visible low-order wavefront sensor (LOWFS) was built to measure tip-tilt and defocus terms of wavefront by using a single NGS within a 2.7 arcmin diameter field when an LGS is used for high-order wavefront sensing with the 188-element curvature based wavefront sensor. This LOWFS is a 2 × 2 sub-aperture Shack-Hartmann sensor with 16 photon-counting avalanche photodiode (APD) modules. A 4×4-element lenslet array is located after the 2 × 2 sub-aperture Shack-Hartmann lenslet array and it is coupled with the APD modules through optical fibers. The field of view of the LOWFS is 4 arcsec in diameter. It has own guide star acquisition unit, acquisition and pupil cameras, and atmospheric dispersion corrector. We describe the design, construction, and integration of this low-order wavefront sensor.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 77364M
Recent development in real-time control system of Subaru adaptive optics including laser guide star mode
We report recent development in real time control system of Subaru adaptive optics system. The main topic is modification of the real time control system for laser guide star operation. The primary change is appending lower order wave-front sensor. And also, an auxiliary tip-tilt and focus control are appended before higher order waver-front sensor to absorb the perturbation of the laser beam and height of sodium layer. Our implementations using the control gain matrix are introduced thoroughly from the basis of the system design and down to the details. Also, other new function and prospects in the near future will be presented for the cascaded average monitor and the time domain over sampling.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 77364M
Recent development in real-time control system of Subaru adaptive optics including laser guide star mode
We report recent development in real time control system of Subaru adaptive optics system. The main topic is modification of the real time control system for laser guide star operation. The primary change is appending lower order wave-front sensor. And also, an auxiliary tip-tilt and focus control are appended before higher order waver-front sensor to absorb the perturbation of the laser beam and height of sodium layer. Our implementations using the control gain matrix are introduced thoroughly from the basis of the system design and down to the details. Also, other new function and prospects in the near future will be presented for the cascaded average monitor and the time domain over sampling.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 77360N
Commissioning status of Subaru laser guide star adaptive optics system
The current status of commissioning and recent results in performance of Subaru laser guide star adaptive optics system is presented. After the first light using natural guide stars with limited configuration of the system in October 2006, we concentrated to complete a final configuration for a natural guide star to serve AO188 to an open use observation. On sky test with full configurations using natural guide star started in August 2008, and opened to a public one month later. We continuously achieved around 0.6 to 0.7 of Strehl ratio at K band using a bright guide star around 9th to 10th magnitude in R band. We found an unexpectedly large wavefront error in our laser launching telescope. The modification to fix this large wavefront error was made and we resumed the characterization of a laser guide star in February 2009. Finally we obtained a round-shaped laser guide star, whose image size is about 1.2 to 1.6 arcsec under the typical seeing condition. We are in the final phase of commissioning. A diffraction limited image by our AO system using a laser guide star will be obtained in the end of 2010. An open use observation with laser guide star system will start in the middle of 2011.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 77360N
Commissioning status of Subaru laser guide star adaptive optics system
The current status of commissioning and recent results in performance of Subaru laser guide star adaptive optics system is presented. After the first light using natural guide stars with limited configuration of the system in October 2006, we concentrated to complete a final configuration for a natural guide star to serve AO188 to an open use observation. On sky test with full configurations using natural guide star started in August 2008, and opened to a public one month later. We continuously achieved around 0.6 to 0.7 of Strehl ratio at K band using a bright guide star around 9th to 10th magnitude in R band. We found an unexpectedly large wavefront error in our laser launching telescope. The modification to fix this large wavefront error was made and we resumed the characterization of a laser guide star in February 2009. Finally we obtained a round-shaped laser guide star, whose image size is about 1.2 to 1.6 arcsec under the typical seeing condition. We are in the final phase of commissioning. A diffraction limited image by our AO system using a laser guide star will be obtained in the end of 2010. An open use observation with laser guide star system will start in the middle of 2011.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7735, 773530
Performance characterization of the HiCIAO instrument for the Subaru Telescope
HiCIAO is a near-infrared, high contrast instrument which is specifically designed for searches and studies for extrasolar planets and proto-planetary/debris disks on the Subaru 8.2 m telescope. A coronagraph technique and three differential observing modes, i.e., a dual-beam simultaneous polarimetric differential imaging mode, quad-beam simultaneous spectral differential imaging mode, and angular differential imaging mode, are used to extract faint objects from the sea of speckle around bright stars. We describe the instrument performances verified in the laboratory and during the commissioning period. Readout noise with a correlated double sampling method is 15 e- using the Sidecar ASIC controller with the HAWAII-2RG detector array, and it is as low as 5 e- with a multiple sampling method. Strehl ratio obtained by HiCIAO on the sky combined with the 188-actuator adaptive optics system (AO188) is 0.4 and 0.7 in the H and K-band, respectively, with natural guide stars that have R ~ 5 and under median seeing conditions. Image distortion is correctable to 7 milli-arcsec level using the ACS data as a reference image. Examples of contrast performances in the observing modes are presented from data obtained during the commissioning period. An observation for HR 8799 in the angular differential imaging mode shows a clear detection of three known planets, demonstrating the high contrast capability of AO188+HiCIAO.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7735, 773530
Performance characterization of the HiCIAO instrument for the Subaru Telescope
HiCIAO is a near-infrared, high contrast instrument which is specifically designed for searches and studies for extrasolar planets and proto-planetary/debris disks on the Subaru 8.2 m telescope. A coronagraph technique and three differential observing modes, i.e., a dual-beam simultaneous polarimetric differential imaging mode, quad-beam simultaneous spectral differential imaging mode, and angular differential imaging mode, are used to extract faint objects from the sea of speckle around bright stars. We describe the instrument performances verified in the laboratory and during the commissioning period. Readout noise with a correlated double sampling method is 15 e- using the Sidecar ASIC controller with the HAWAII-2RG detector array, and it is as low as 5 e- with a multiple sampling method. Strehl ratio obtained by HiCIAO on the sky combined with the 188-actuator adaptive optics system (AO188) is 0.4 and 0.7 in the H and K-band, respectively, with natural guide stars that have R ~ 5 and under median seeing conditions. Image distortion is correctable to 7 milli-arcsec level using the ACS data as a reference image. Examples of contrast performances in the observing modes are presented from data obtained during the commissioning period. An observation for HR 8799 in the angular differential imaging mode shows a clear detection of three known planets, demonstrating the high contrast capability of AO188+HiCIAO.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 773653
The performance of the laser guide star system for the Subaru Telescope
We are developing a laser guide star (LGS) system for the 188-elements Adaptive Optics system (AO188) of the Subaru telescope. In this paper we describe the results of the performance tests of the LGS system. The beam that excites sodium atoms at 90 km altitude of the LGS is generated by the following sequence. The source of the beam is a quasi-CW mode locked sum-frequency generating 589 nm laser. This laser beam propagates through a diagnostics system for measuring the wavelength and the beam quality. Then it couples into a solidcore photonic crystal fiber cable for transmitting the beam to a telescope for launching the beam (LLT: Laser Launching Telescope). The output beam from this fiber cable is collimated by the optics mounted on the LLT. This collimated beam is expanded by the LLT and launched into the sky. We executed several engineering observations of the LGS system from 2009 for confirming the performance of all the components in this sequence. We also report the quality of the LGS.
- 16 July 2010
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7736, 773653
The performance of the laser guide star system for the Subaru Telescope
We are developing a laser guide star (LGS) system for the 188-elements Adaptive Optics system (AO188) of the Subaru telescope. In this paper we describe the results of the performance tests of the LGS system. The beam that excites sodium atoms at 90 km altitude of the LGS is generated by the following sequence. The source of the beam is a quasi-CW mode locked sum-frequency generating 589 nm laser. This laser beam propagates through a diagnostics system for measuring the wavelength and the beam quality. Then it couples into a solidcore photonic crystal fiber cable for transmitting the beam to a telescope for launching the beam (LLT: Laser Launching Telescope). The output beam from this fiber cable is collimated by the optics mounted on the LLT. This collimated beam is expanded by the LLT and launched into the sky. We executed several engineering observations of the LGS system from 2009 for confirming the performance of all the components in this sequence. We also report the quality of the LGS.
- Open Access
- 25 August 2009
- Published by Oxford University Press (OUP) in Publications of the Astronomical Society of Japan
- Vol. 61 (4) , 763-768
High-Power Laser Beam Transfer through Optical Relay Fibers for a Laser Guide Adaptive Optics System
We are developing a laser guide star adaptive optics (LGSAO) system for the Subaru Telescope on Mauna Kea, Hawaii. The AO188 system will dramatically increase the observable sky area. This system differs from systems used at other large telescopes in that it utilizes the combination of an all-solid-state mode-locked sum-frequency generation (SFG) laser as a light source and single-mode optical fiber for beam transference. Optical fibers transfer laser light from the source, located at the Nasmyth platform, to the laser launching telescope more flexibly and more easily than do mirror relay optics. However, optical fibers induce nonlinear scattering effects, such as stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS), beyond certain threshold levels in high-power lasers. We measured the laser transmission characteristics of a photonic crystal fiber (PCF) whose mode field diameter (MFD) was 11$$\mu$$m, and a step index fiber (SIF) cable whose MFD was 4.2$$\mu$$m to evaluate the threshold levels for non-linear effects. We observed SRS in the 200-m-long SIF when we input 1.3 W. However, SRS and SBS were not induced in the 200-m-long PCF, even for an input power of 5.3 W. As a result, we estimated the threshold of SRS to be 33 W for the 35-m-long PCF designed for the Subaru LGSAO system. Given that the fiber will carry a laser beam of about 30 W with a pulse width of less than 1 ns, we conclude that nonlinear scattering will pose no problems for this application.- 25 August 2009
- Published by Oxford University Press (OUP) in Publications of the Astronomical Society of Japan
- Vol. 61 (4) , 763-768
Open AccessHigh-Power Laser Beam Transfer through Optical Relay Fibers for a Laser Guide Adaptive Optics System
We are developing a laser guide star adaptive optics (LGSAO) system for the Subaru Telescope on Mauna Kea, Hawaii. The AO188 system will dramatically increase the observable sky area. This system differs from systems used at other large telescopes in that it utilizes the combination of an all-solid-state mode-locked sum-frequency generation (SFG) laser as a light source and single-mode optical fiber for beam transference. Optical fibers transfer laser light from the source, located at the Nasmyth platform, to the laser launching telescope more flexibly and more easily than do mirror relay optics. However, optical fibers induce nonlinear scattering effects, such as stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS), beyond certain threshold levels in high-power lasers. We measured the laser transmission characteristics of a photonic crystal fiber (PCF) whose mode field diameter (MFD) was 11$$\mu$$m, and a step index fiber (SIF) cable whose MFD was 4.2$$\mu$$m to evaluate the threshold levels for non-linear effects. We observed SRS in the 200-m-long SIF when we input 1.3 W. However, SRS and SBS were not induced in the 200-m-long PCF, even for an input power of 5.3 W. As a result, we estimated the threshold of SRS to be 33 W for the 35-m-long PCF designed for the Subaru LGSAO system. Given that the fiber will carry a laser beam of about 30 W with a pulse width of less than 1 ns, we conclude that nonlinear scattering will pose no problems for this application. - 12 July 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7015
Characterization of vibrating shape of a bimorph deformable mirror
Actual measurement of vibrating shape of a bimorph deformable mirror is presented to discuss the characteristics of resonance. Understanding the vibration properties of a bimorph deformable mirror is a key issue to overcome resonance problem, a major drawback of this type of deformable mirror, and to make full use of its advantages. Two-dimensional vibrating shape of the deformable mirror surface, not only at a point, is essential to figure out the resonance behavior. The results are informative for improvement of mechanical design or control software.
- 12 July 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7015
Characterization of vibrating shape of a bimorph deformable mirror
Actual measurement of vibrating shape of a bimorph deformable mirror is presented to discuss the characteristics of resonance. Understanding the vibration properties of a bimorph deformable mirror is a key issue to overcome resonance problem, a major drawback of this type of deformable mirror, and to make full use of its advantages. Two-dimensional vibrating shape of the deformable mirror surface, not only at a point, is essential to figure out the resonance behavior. The results are informative for improvement of mechanical design or control software.