HTHenrique Trevisan

Henrique Trevisan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Henrique Trevisan has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    EFFICIENCY OF TRADITIONAL SHOU SUGI BAN WOOD PROTECTION TECHNIQUE IN ASSOCIATION WITH VEGETABLE OILS AGAINST ROTTING FUNGI ACTION ON PINUS WOOD

    by Henrique Trevisan, Nathália Augusto dos Santos, Vinicius José Fernandes

    The use of low-durability wood species encouraged the development of new methods focused on protecting wood from decay processes. Thus, the aim of the current study is to assess resistance-aggregation efficiency in Pinus sp. wood subjected to the action of fungi Trametes versicolor and Rhodonia placenta, as well as to the Japanese heat-treatment method called Shou sugi ban, in association with the incorporation of two oils. The experiment was performed based on the ASTM D – 2017 standard (1994). The herein adopted wood treatments comprised natural wood, charred wood, natural wood treated with linseed oil, charred wood treated with linseed oil, natural wood treated with Crude Tall Oil (CTO) and charred wood treated with CTO. There was resistance aggregation against the action of fungi T. versicolor and R. placenta in wood treated under all assessed conditions, although at different efficiency levels. Increased inhibition of xylophagous fungi action on charred Pinus sp. wood was observed when both linseed oil and CTO were incorporated to it. Based on the current findings, natural Pinus sp. wood is not resistant or perishable to these xylophages, but treated under the tested conditions were classified as resistant to T. versicolor and as moderately resistant to R. placenta.


  • Open Access

    Evaluations of the deterioration characteristics of thermally treated wood samples from Corymbia citriodora and Eucalyptus urophylla caused by marine wood borers

    by Henrique Trevisan, Gabriel Paura Antônio, Thiago Sampaio de Souza, Vinicius José Fernandes, Paulo Sergio Torres Brioso, Natalia Dias de Souza

    The low natural durability properties of some types of wood indicate the need for treatments to enhance the resistance of these materials to biological decay. In the sea, this resistance is necessary due to the actions of wood-boring mollusks and crustaceans. These treatments must be effective without harming the environment. Wood thermal treatment should be evaluated for this purpose. Therefore, the aim of this study was to evaluate the deterioration characteristics of thermally treated wood samples from Corymbia citriodora and Eucalyptus urophylla under the actions of marine wood borers. A method was proposed to aid in this assessment. Ten samples of these woods, both untreated and thermally treated, were submerged in the sea, each at a depth of 2.5 meters, for five months. After this period, the external borehole number, mass loss, and central flat lesion parameters of the samples were evaluated. Both the thermally treated and untreated wood samples of C. citriodora showed less deterioration than those of E. urophylla, with fewer boreholes, smaller lesioned areas, and lower mass losses. Compared with untreated wood and E. urophylla wood, thermally treated C. citriodora wood exhibited some resistance to marine wood borers. It was concluded that C. citriodora wood was naturally more resistant to marine wood borers than E. urophylla wood. Moreover, thermal treatment increased the boring resistance of C. citriodora wood while increasing the susceptibility of E. urophylla wood. The digital measurement of flat lesions was proven to be an auxiliary and promising method for evaluating the deterioration process.

  • Open Access

    Effect of the thermal modification and nano-ZnO impregnation on the deterioration of Caribbean pine wood

    by Bruno Couto da Silva, Henrique Trevisan, Rosilei Aparecida Garcia

    This study aimed to investigate the effect of thermal modification and nano-zinc oxide (nano-ZnO) particle impregnation on the deterioration of Caribbean pine wood under field conditions. Samples were thermally-modified at various temperature levels (control, 180 °C, 200 °C, and 220 °C). Nano-ZnO impregnation was done with an aqueous solution at 1,5 % in an autoclave under two-steps of pressure and vacuum. Unmodified and thermally-modified, non-impregnated and nano-ZnO impregnated samples were exposed to deterioration for five months in field tests. A deterioration index was used to evaluate the health condition of the samples. The mass loss and occurrence of termite tunnels in percentage were also determined. The nano-ZnO impregnation improved the resistance of unmodified wood to field-deterioration. The thermal modification at 180oC, and 200ºC increased the wood deterioration and nano-ZnO impregnation did not improve their resistance. Unmodified and 220 ºC modified samples had a lower mass loss by xylophages than other thermal treatments regardless of the nanoparticle impregnation. The nano-ZnO impregnation decreases the occurrence of termite tunnels in unmodified, 200 ºC and 220 ºC-modified samples.

  • Open Access

    Novo Modelo de Armadilha para Captura de Scolytinae e Platypodinae (Insecta, Coleoptera)

    by Acacio Geraldo de Carvalho, Henrique Trevisan

    O monitoramento de insetos é atividade relevante no processo de avaliação da sanidade de povoamentos florestais, bem como em estudos ecológicos. Dessa forma, geralmente, os levantamentos são realizados utilizando-se armadilhas de captura. Em especial para os grupos Scolytinae e Platypodinae, são empregadas armadilhas de impacto, iscadas com álcool 96 ºGL. Sendo assim, este trabalho tem o objetivo de descrever um novo modelo desse tipo de equipamento, denominado SEMIFUNIL. O projeto propõe o uso de materiais alternativos na fabricação da armadilha: garrafa PET de 2000 mL, mangueira plástica, prato plástico e arame, buscando com isso redução de custos.


  • Open Access

    Analysis of rigidity loss and deterioration from exposure in a decay test field of thermorectificated eucalyptus grandis wood

    by Henrique Trevisan, João Vicente De Figueiredo Latorraca, Angelo Luíz Pacheco dos Santos, Juliana Grilo Teixeira, Acacio Geraldo De Carvalho

    The objective was to evaluate the elasticity dynamic modulus reduction (MOEd) and deterioration of E. grandis thermorectificated wood by exposure to environmental weathering. Six trees were used to obtain 14 logs of 2,4m, with seven from external (sapwood) and the others from internal (heartwood) part of the trunk. A total of 84 wood samples of 2,5x 5x 50cm were made, with half from the inner and the other from the external trunk portion. 14 treatments were evaluated with six replicates composed of thermorectificated wood submitted two differents times (2 and 4 hours) and three temperatures (200, 215 and 230˚C). An ultrasound Stress Wave Timer device was used to evaluate MOEd and the mass measured by weighing. Samples remained in the decay test field for ten months, and monthly inspected and recorded to xylophogous organism’s occurrence. At the end of this period MOEd and mass were revaluated. The central portion of wood samples were more deteriorated, with mass losses and stiffness losses ranging from (8-56%) and (18-91%), respectively. Lower values were observed in the wood coming from the external portion, with mass losses and stiffness ranging from (3-10%) and (8-20%), respectively. The thermorectificated wood samples were more damaged by action the termites and less by the action of fungi, compared to controls.


  • Open Access

    Descrição de danos e volume de fitomassa lenhosa de fustes de Cassia siamea Lam. seccionados por Coccoderus novempunctatus (coleoptera: cerambycidae)

    by Antônio José da Silva Neto, Henrique Trevisan, Luiz Santana Do Nascimento, Acacio Geraldo de Carvalho

    Cerambicídeos que promovem a queda de galhos ou fustes podem causar danos a diversas espécies florestais, sejam em plantios econômicos ou mesmo em árvores utilizadas em arborização. O cerambicídeo Coccoderus novempunctatus é um destes agentes. O dano realizado pela larva propicia a queda de ramos de muitas espécies florestais e, no caso ora avaliado, em fustes de Cassia siamea ou parte destes. Esta é uma espécie florestal utilizada em arborização e recuperação de áreas perturbadas ecologicamente. O trabalho teve o objetivo de diagnosticar os danos de C. novempunctatus em C. siamea, através da diagnose das lesões e da quantificação do volume de madeira dos fustes por ele seccionados. Cinco parcelas foram demarcadas em mata secundária, onde a atuação do inseto havia sido registrada. Os fustes de C. siamea, cortados pelo inseto, tiveram seu diâmetro no ponto da secção mensurado bem como o comprimento total. Os volumes de madeira foram calculados utilizando-se o método de Smalian. O diâmetro médio no ponto da secção e o comprimento médio de fustes de C. siamea, cortados por C. novempunctatus foi 9,07 cm e 6,31 m, respectivamente. O volume médio de madeira, destes fustes, com casca e sem casca foi 0,0261 e 0,0218 m³, respectivamente.


  • Open Access

    RESISTÊNCIA DA MADEIRA DE QUATRO ESSÊNCIAS UTILIZADAS NA ARBORIZAÇÃO URBANA A Coptotermes gestroi (WASMANN, 1896)

    by Felipe Marauê Marques Tieppo, Henrique Trevisan, Acacio Geraldo de Carvalho

    RESISTÊNCIA DA MADEIRA DE QUATRO ESSÊNCIAS UTILIZADAS NA ARBORIZAÇÃO URBANA A Coptotermes gestroi (WASMANN, 1896)

  • Open Access

    Avaliação de propriedades físicas e mecânicas da madeira de cinco espécies florestais em função da deterioração em dois ambientes

    by Henrique Trevisan, Felipe Marauê Marques Tieppo, Acacio Geraldo de Carvalho, Roberto Carlos Costa Lelis

    Este trabalho teve por objetivo avaliar algumas propriedades físicas e mecânicas da madeira de Eucalyptus urophylla S.T. Blake "Eucalipto" (Myrtaceae), Melia azedarach L. "Cinamomo" (Meliaceae), Lophantera lactescens Ducke, "lanterneira" (Malpighiaceae), Pinus elliottii Engelm. "Pinus" (Pinaceae) e Inga marginata Wild "Inga" (Mimosaceae), submetidas ao processo de degradação em razão da exposição à intempérie no período de 12 meses, as madeiras foram colocadas em dois ambientes com características edafoclimáticas diferenciadas, isto é, foram montados dois campos de apodrecimento, sendo um dentro de uma mata secundária e outro a céu aberto, em um pasto formado por gramíneas rasteiras. Na avaliação, adotou-se um índice de deterioração médio, para expressar a degradação causada pelos fatores bióticos, nos corpos-de-prova oriundos de toras expostas nos respectivos ambientes. As determinações da densidade aparente, bem como da resistência à flexão (módulo de elasticidade (MOE) e ruptura (MOR)) e compressão paralela às fibras da madeira, foram realizadas antes e depois da exposição à intempérie. Os resultados indicaram que ocorreram reduções diferenciadas nas propriedades avaliadas. As diminuições significativas da densidade ocorreram somente nos corpos-de-prova oriundos das madeiras expostas dentro da mata, bem como as reduções nos módulos de elasticidade e ruptura foram mais acentuadas nas madeiras procedentes desse ambiente. A resistência à compressão da madeira apresentou-se com reduções maiores, também nesse ambiente.