Bommanna Gounder Krishnappan

Despite the environmental significance and ecological importance of cohesive sediment (<63 μm), improved knowledge of how effective particle size distributions (EPSDs) change due to flocculation under different conditions of shear stress and bed configuration is required to better understand in situ transport and storage properties and refine existing sediment transport models. Here, a rotating annular flume was used to (i) evaluate EPSDs under different shear stress and bed types (plane-impermeable and -porous gravel bed) for deposition and erosion experiments; (ii) assess flocculation processes with EPSDs; and (iii) compare flume and field EPSDs observations with respect to measured shear stress. While deposition experiments over the impermeable bed led to an EPSD equilibrium in all shear conditions (constant EPSD percentiles), the ingress experiment over the gravel bed resulted in varying EPSDs, and no equilibrium was observed. During the erosion experiment, deposited flocs became coarser due to bed consolidation, and no particle breakage was observed once particles were resuspended. The ingress experiment showed high efficiency in entrapping suspended particles (~95% of initial suspended sediment), and no exfiltration or resuspension was recorded. Flocculation ratios calculated using EPSDs showed negative correlations with shear stress, indicating that increasing flow energy promoted flocculation for flume and field observations. Our results showed that both suspended and bed sediments can flocculate into coarser flocs that, in turn, are preferentially ingressed and stored in the substrate when in suspension. These findings have important implications regarding legacy impacts, as substrate-stored particles can potentially extend the effects of upstream landscape disturbances.

“Excess” interstitial fine sediment (<2 mm) is known to cause deleterious impacts on streambed ecosystems. Current methodologies available to assess ingress and its vertical and horizontal components still lack standardization, and the accuracy of commonly used assessments is still debatable. Here, we evaluate three fine sediment trap designs that measure only vertical (V), only horizontal (H), and both vertical and horizontal (HV) ingress mechanisms. Sediment traps were deployed in triplicates to: (i) evaluate measurement variability within traps of the same type; (ii) evaluate the effects of trap design on particle size distributions of infiltrated fine sediment and; (iii) assess methodologies used to calculate vertical and horizontal ingress mechanisms. Ingress rates were recorded for each sediment trap during seven deployment periods (lasting from 2 to 10 days) at a range of flow conditions at four sites. A total of 252 traps were deployed. Results from the triplicate assessment of traps with the same design showed that most measurements presented high variability and that particle size distributions were significantly affected by trap design. Here, different sediment traps were able to estimate directional ingress mechanisms. However, direct comparison between HV with either H or V traps led to an overestimation of horizontal or vertical ingress mechanisms, respectively. Better estimations were found when comparing HV observations to half the accumulation in either H or V, due to the proportional trap volume available for each accumulation mechanism according to trap design.

In this paper, the author had employed a version of the universal soil loss equation to assess the soil erosion in the Cesar Watershed in Colombia. The hotspots where the soil erosion is most pronounced were also identified using the Getis-Ord statis...

Sampling programs for suspended sediment were carried out in the Usumacinta River and its tributary Grijalva River in Mexico during the years 2016 and 2017. Suspended sediment samples collected during these sampling programs were analyzed in the laboratory using a Rotating Annular Flume (RAF) fitted with a Particle Tracking Velocimetry (PTV) to obtain the 2D images of the suspended sediment particles as they were undergoing floc reconstruction, and subsequently using a glass settling column fitted with inline digital holography set up to obtain 3D holograms of the fully flocculated sediment particles. From these high-resolution hologram images, the fractal dimension of the flocculated sediment particles was obtained using the classical box-counting method and an improved Triangular box-counting method. The estimated fractal dimension of flocculated sediment, which is a measure of floc compactness and structure that control the settling velocity of flocculated sediment was used to validate two empirical models to estimate the fractal dimension in terms of the floc sizes of suspended sediments of these two rivers. It is shown in this study that the floc characteristic can be analyzed in laboratory experiments after floc reconstruction with the use of an RAF and it offers a viable alternative to the costly in-situ sampling that is often carried out in ocean research. The digital holography method employed in this research offers an efficient methodology to obtain the floc fractal dimension. Regarding the innovative aspects and new contribution to science, we can say that we have developed a laboratory protocol to test river waters to establish floc properties such as fractal dimensions of flocs in this research which will help to test river waters on a routine basis with manageable costs. We can also say that we have developed models to predict the relationship between floc fractal dimension and floc size, which did not exist before.

Economic development projects in river basins, involving mining, forestry, agriculture and urban developments, invariably impact the aquatic ecosystems of the basin

In this paper, a review of a semi-empirical modelling approach for cohesive sediment transport in river systems is presented. The mathematical modelling of cohesive sediment transport is a challenge because of the number of governing parameters controlling the various transport processes involved in cohesive sediment, and hence a semi-empirical approach is a viable option. A semi-empirical model of cohesive sediment called the RIVFLOC model developed by Krishnappan is reviewed and the model parameters that need to be determined using a rotating circular flume are highlighted. The parameters that were determined using a rotating circular flume during the application of the RIVFLOC model to different river systems include the critical shear stress for erosion of the cohesive sediment, critical shear stress for deposition according to the definition of Partheniades, critical shear stress for deposition according to the definition of Krone, the cohesion parameter governing the flocculation of cohesive sediment and a set of empirical parameters that define the density of the floc in terms of the size of the flocs. An examination of the variability of these parameters shows the need for testing site-specific sediments using a rotating circular flume to achieve a reliable prediction of the RIVFLOC model. Application of the model to various river systems has highlighted the need for including the entrapment process in a cohesive sediment transport model.

Fine-grained cohesive sediment is the primary vector for nutrient and contaminant redistribution through aquatic systems and is a critical indicator of land disturbance. A critical limitation of most existing sediment transport models is that they assume that the transport characteristics of fine sediment can be described using the same approaches that are used for coarse-grained non-cohesive sediment, thereby ignoring the tendency of fine sediment to flocculate. Here, a modelling framework to simulate flow and fine sediment transport in the Crowsnest River, the Castle River, the Oldman River and the Oldman Reservoir after the 2003 Lost Creek wildfire in Alberta, Canada was developed and validated. It is the first to include explicit description of fine sediment deposition/erosion processes as a function of bed shear stress and the flocculation process. This framework integrates four existing numerical models: MOBED, RIVFLOC, RMA2 and RMA4 using river geometry, flow, fine suspended sediment characteristics and bathymetry data. Sediment concentration and particle size distributions computed by RIVFLOC were used as the upstream boundary condition for the reservoir dispersion model RMA4. The predicted particle size distributions and mass of fine river sediment deposited within various sections of the reservoir indicate that most of the fine sediment generated by the upstream disturbance deposits in the reservoir. Deposition patterns of sediment from wildfire-impacted landscapes were different than those from unburned landscapes because of differences in settling behaviour. These differences may lead to zones of relatively increased internal loading of phosphorus to reservoir water columns, thereby increasing the potential for algae proliferation. In light of the growing threats to water resources globally from wildfire, the generic framework described herein can be used to model propagation of fine river sediment and associated nutrients or contaminants to reservoirs under different flow conditions and land use scenarios. The framework is thereby a valuable tool to support decision making for water resources management and catchment planning.

In this short communication, the erosion process of the fine, cohesive sediment collected from the upper River Taw in South West England was studied in a rotating annular flume located in the National Water Research Institute in Burlington, Ontario, Canada. This study is part of a research project that is underway to model the transport of fine sediment and the associated nutrients in that river system. The erosion experimental data show that the critical shear stress for erosion of the upper River Taw sediment is about 0.09 Pa and it did not depend on the age of sediment deposit. The eroded sediment was transported in a flocculated form and the agent of flocculation for the upper River Taw sediment may be due to the presence of fibrils from microorganisms and organic material in the system. The experimental data were analysed using a curve fitting approach of Krone and a mathematical model of cohesive sediment transport in rotating circular flumes developed by Krishnappan. The modelled and measured data were in good agreement. An evaluation of the physical significance of Krone’s fitting coefficients is presented. Variability of the fitting coefficients as a function of bed shear stress and age of sediment deposit indicate the key role these two factors play in the erosion process of fluvial cohesive sediment.