Giuseppe Zerbi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Giuseppe Zerbi has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Chiara Castiglioni
Dipartimento di Chimica, Materiali e Ingegneria Chimica Giulio Natta, Politecnico di Milano, 20133 Milano, Italy
7 shared publications - Luigi Brambilla
Dipartimento di Chimica, Materiali e Ingegneria Chimica Giulio Natta, Politecnico di Milano, 20133 Milano, Italy
7 shared publications - Mirella Del Zoppo
Politecnico di Milano, Italy
7 shared publications - Andrea Lucotti
Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
5 shared publications - Matteo Tommasini
Politecnico di Milano
5 shared publications - Andrea Bianco
INAF - Osservatorio Astronomico di Brera (Italy)
2 shared publications
Latest Publications
- Open Access
Vibrational Properties of Doped P3HT Chains in Solution: Insight into the Doping Mechanism from Infrared IRAV and Raman RaAV Bands
Chemical doping is a well-established technique for increasing the electrical conductivity of polyconjugated polymers, and its effectiveness can be assessed through IR spectroscopy, thanks to the rise of the so-called IRAVs (infrared activated vibrations), which prove the formation of polarons on the polymer chain. While the mechanism of the IRAVs activation has been widely explored in the past, several peculiar features remain unclear. Changes in the Raman spectrum of doped polymers (RaAV, Raman activated vibrations) are widely used as well for monitoring the doping process, but the interpretation is often limited to purely empirical correlations. By means of an experimental campaign on doped regio-regular poly(3-hexylthiophene-2,5-diyl) (P3HT) samples in chloroform solution and on the solid samples cast from the same solutions, this paper presents for the first time a thorough comparative analysis of IRAVs and RaAVs, aiming at a unified description of the structure of doped P3HT. In particular, we will discuss the effect of the doping level on the vibrational features of the polymer and the dopant so that spectroscopic markers can be found to be used in the identification of the presence of ICT (integer charge transfer) complexes in different doping regimes. This study demonstrates that combining IR, Raman, and UV-Vis-NIR spectroscopies provides a powerful, complementary set of tools to diagnose not only the doping level but also the detailed molecular and supramolecular structure of the doped P3HT, useful for the development of structure/properties relationships in the perspective of the optimization of the charge transport performances.
Open AccessVibrational Properties of Doped P3HT Chains in Solution: Insight into the Doping Mechanism from Infrared IRAV and Raman RaAV Bands
Chemical doping is a well-established technique for increasing the electrical conductivity of polyconjugated polymers, and its effectiveness can be assessed through IR spectroscopy, thanks to the rise of the so-called IRAVs (infrared activated vibrations), which prove the formation of polarons on the polymer chain. While the mechanism of the IRAVs activation has been widely explored in the past, several peculiar features remain unclear. Changes in the Raman spectrum of doped polymers (RaAV, Raman activated vibrations) are widely used as well for monitoring the doping process, but the interpretation is often limited to purely empirical correlations. By means of an experimental campaign on doped regio-regular poly(3-hexylthiophene-2,5-diyl) (P3HT) samples in chloroform solution and on the solid samples cast from the same solutions, this paper presents for the first time a thorough comparative analysis of IRAVs and RaAVs, aiming at a unified description of the structure of doped P3HT. In particular, we will discuss the effect of the doping level on the vibrational features of the polymer and the dopant so that spectroscopic markers can be found to be used in the identification of the presence of ICT (integer charge transfer) complexes in different doping regimes. This study demonstrates that combining IR, Raman, and UV-Vis-NIR spectroscopies provides a powerful, complementary set of tools to diagnose not only the doping level but also the detailed molecular and supramolecular structure of the doped P3HT, useful for the development of structure/properties relationships in the perspective of the optimization of the charge transport performances.
- Open Access
- 28 February 2025
- Published by MDPI AG in Preprints.org
Vibrational Properties of Doped P3HT Chains in Solution: Insight into the Doping Mechanism from Infrared IRAV and Raman RaAV Bands
P3HT is one of the most well-known conducting polymers, and it is still considered a promising candidate for new applications in its conductive p-doped state. According to the literature, polymer doping can be assessed through IR spectroscopy: the raise of strong IR absorption bands - the so-called IRAVs – is indeed the signature of polarons, which form on the polymer chain after the hole (or electron) injection by the dopant. While the mechanism of the IRAVs activation has been widely explored in the past and the IRAV bands can be reasonably predicted by means of state-of-the-art DFT calculations on model charged oligomers in vacuo, several peculiar features remain still unclear, and cannot be fully understood based on such idealized models. In addition, changes in the Raman spectrum of doped polymers (RaAV bands) are widely used for monitoring the doping process, but the interpretation is often limited to purely empirical correlations. This paper focuses on the comparative analysis of IRAVs and RaAVs of doped P3HT, aiming at a unified description of the structure of doped P3HT. By means of an experimental campaign on doped P3HT samples in chloroform solution, and on the solid samples cast from the same solutions, we will explore how modifications in the spectra can reveal different features of the molecular structure that can be related to the doping mechanism. In particular, we will discuss the effect of the doping level on the vibrational features of the polymer and the dopant, to unfold the spectroscopic markers of ICT complexes, and the role of the crystalline vs disordered phases.
- 28 February 2025
- Published by MDPI AG in Preprints.org
Open AccessVibrational Properties of Doped P3HT Chains in Solution: Insight into the Doping Mechanism from Infrared IRAV and Raman RaAV Bands
P3HT is one of the most well-known conducting polymers, and it is still considered a promising candidate for new applications in its conductive p-doped state. According to the literature, polymer doping can be assessed through IR spectroscopy: the raise of strong IR absorption bands - the so-called IRAVs – is indeed the signature of polarons, which form on the polymer chain after the hole (or electron) injection by the dopant. While the mechanism of the IRAVs activation has been widely explored in the past and the IRAV bands can be reasonably predicted by means of state-of-the-art DFT calculations on model charged oligomers in vacuo, several peculiar features remain still unclear, and cannot be fully understood based on such idealized models. In addition, changes in the Raman spectrum of doped polymers (RaAV bands) are widely used for monitoring the doping process, but the interpretation is often limited to purely empirical correlations. This paper focuses on the comparative analysis of IRAVs and RaAVs of doped P3HT, aiming at a unified description of the structure of doped P3HT. By means of an experimental campaign on doped P3HT samples in chloroform solution, and on the solid samples cast from the same solutions, we will explore how modifications in the spectra can reveal different features of the molecular structure that can be related to the doping mechanism. In particular, we will discuss the effect of the doping level on the vibrational features of the polymer and the dopant, to unfold the spectroscopic markers of ICT complexes, and the role of the crystalline vs disordered phases.
- Open Access
- 15 November 2024
- Published by MDPI AG in Spectroscopy Journal
- Vol. 2 (4) , 264-286
Probing the Charge State and the Intermolecular Environment by Vibrational Spectroscopy: The Peculiar Modulation of Frequencies and Band Intensities of F4TCNQ and Its Anion
2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is a molecule widely employed as a very effective p-dopant of semi-conducting polymers, such as poly(3-hexylthiophene-2,5-diyl) (P3HT). The CN stretching transitions of F4TCNQ are exceptionally sensitive to the charge state of the molecule, thus allowing the doping diagnosis via IR spectroscopy. Less pronounced frequency shifts can reveal characteristics of the intermolecular environment. We present a systematic study based on Density Functional Theory (DFT) calculations and on experiments aimed at exploring how different factors, such as the charge state and the environment, modify the vibrational spectra of F4TCNQ. While several effects on the vibrational frequencies are well known and have been thoroughly investigated in the past, this study focuses on the infrared intensities of the CN stretching modes and reveals that they are strongly affected both by the charge state of the molecule and by the surrounding medium: it is then mandatory to consider such remarkable intensity modulation for any quantitative diagnosis based on spectroscopic measurements, e.g., concerning the number of F4TCNQ molecules involved in the formation of charge transfer complexes.
- 15 November 2024
- Published by MDPI AG in Spectroscopy Journal
- Vol. 2 (4) , 264-286
Open AccessProbing the Charge State and the Intermolecular Environment by Vibrational Spectroscopy: The Peculiar Modulation of Frequencies and Band Intensities of F4TCNQ and Its Anion
2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is a molecule widely employed as a very effective p-dopant of semi-conducting polymers, such as poly(3-hexylthiophene-2,5-diyl) (P3HT). The CN stretching transitions of F4TCNQ are exceptionally sensitive to the charge state of the molecule, thus allowing the doping diagnosis via IR spectroscopy. Less pronounced frequency shifts can reveal characteristics of the intermolecular environment. We present a systematic study based on Density Functional Theory (DFT) calculations and on experiments aimed at exploring how different factors, such as the charge state and the environment, modify the vibrational spectra of F4TCNQ. While several effects on the vibrational frequencies are well known and have been thoroughly investigated in the past, this study focuses on the infrared intensities of the CN stretching modes and reveals that they are strongly affected both by the charge state of the molecule and by the surrounding medium: it is then mandatory to consider such remarkable intensity modulation for any quantitative diagnosis based on spectroscopic measurements, e.g., concerning the number of F4TCNQ molecules involved in the formation of charge transfer complexes.
- Open Access
- 14 October 2024
- Published by MDPI AG in Preprints.org
Probing the Charge State and the Intermolecular Environment by Vibrational Spectroscopy: The Peculiar Modulation of Frequencies and Bands Intensities of F4TCNQ and of Its Anion
2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is a molecule widely employed as a very effective p-dopant of semi-conducting polymers, such as poly(3-hexylthiophene -2,5-diyl) (P3HT). The CN stretching transitions of F4TCNQ are exceptionally sensitive to the charge state of the molecule, thus allowing the doping diagnosis via IR spectroscopy. Less pronounced frequency shifts can reveal characteristics of the intermolecular environment. We present a systematic study based on Density Functional Theory (DFT) calculations and on experiments aimed at exploring how different factors, such as the charge state and the environment, modify the vibrational spectra of F4TCNQ. While several effects on the vibrational frequencies are well known and have been thoroughly investigated in the past, this study focuses on the infrared intensities of the CN stretching modes and reveals that they are strongly affected both by the charge state of the molecule and by the surrounding medium: it is then mandatory to consider such remarkable intensity modulation for any quantitative diagnosis based on spectroscopic measurements, e.g., concerning the amount of F4TCNQ molecules involved in the formation of charge transfer complexes.
- 14 October 2024
- Published by MDPI AG in Preprints.org
Open AccessProbing the Charge State and the Intermolecular Environment by Vibrational Spectroscopy: The Peculiar Modulation of Frequencies and Bands Intensities of F4TCNQ and of Its Anion
2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) is a molecule widely employed as a very effective p-dopant of semi-conducting polymers, such as poly(3-hexylthiophene -2,5-diyl) (P3HT). The CN stretching transitions of F4TCNQ are exceptionally sensitive to the charge state of the molecule, thus allowing the doping diagnosis via IR spectroscopy. Less pronounced frequency shifts can reveal characteristics of the intermolecular environment. We present a systematic study based on Density Functional Theory (DFT) calculations and on experiments aimed at exploring how different factors, such as the charge state and the environment, modify the vibrational spectra of F4TCNQ. While several effects on the vibrational frequencies are well known and have been thoroughly investigated in the past, this study focuses on the infrared intensities of the CN stretching modes and reveals that they are strongly affected both by the charge state of the molecule and by the surrounding medium: it is then mandatory to consider such remarkable intensity modulation for any quantitative diagnosis based on spectroscopic measurements, e.g., concerning the amount of F4TCNQ molecules involved in the formation of charge transfer complexes.
- 8 August 2017
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 9 (36) , 13640-13650
Graphite particles induce ROS formation in cell free systems and human cells
The edges of carbonaceous graphitic particles, naked from any inorganic and/or organic compounds can promote ROS formation in cell free systems and in human cells.
- 8 August 2017
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 9 (36) , 13640-13650
Graphite particles induce ROS formation in cell free systems and human cells
The edges of carbonaceous graphitic particles, naked from any inorganic and/or organic compounds can promote ROS formation in cell free systems and in human cells.
- 7 December 2012
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 405 (5) , 1733-1741
Portable Raman versus portable mid-FTIR reflectance instruments to monitor synthetic treatments used for the conservation of monument surfaces
This study aims to evaluate the relevance of portable Raman and portable mid-Fourier transform infrared (FTIR) reflectance instruments in monitoring the synthetic treatments applied on plaster substrates, a crucial issue in a conservation work. Some polymeric consolidants and protectives have a relatively short life owing to their degradation, and after some years the surface should be retreated. It follows that any information about the presence and composition of the products applied, their chemical transformations and their distribution on the surfaces is essential. For these purposes, conservation scientists should seek and test new in situ methods, and this is of utmost importance especially in the case of buildings, considering their large dimensions and consequent extensive mapping. The effectiveness of portable Raman and portable mid-FTIR reflectance instruments has been compared by analysing a set of laboratory specimens prepared and treated with variable amounts of products belonging to three classes of polymers; the spectroscopic investigation highlighted, for the first time, the limits and the advantages of portable Raman and portable mid-FTIR reflectance instruments in the detection of small amounts of products commonly employed for the conservation of plasters.
- 7 December 2012
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 405 (5) , 1733-1741
Portable Raman versus portable mid-FTIR reflectance instruments to monitor synthetic treatments used for the conservation of monument surfaces
This study aims to evaluate the relevance of portable Raman and portable mid-Fourier transform infrared (FTIR) reflectance instruments in monitoring the synthetic treatments applied on plaster substrates, a crucial issue in a conservation work. Some polymeric consolidants and protectives have a relatively short life owing to their degradation, and after some years the surface should be retreated. It follows that any information about the presence and composition of the products applied, their chemical transformations and their distribution on the surfaces is essential. For these purposes, conservation scientists should seek and test new in situ methods, and this is of utmost importance especially in the case of buildings, considering their large dimensions and consequent extensive mapping. The effectiveness of portable Raman and portable mid-FTIR reflectance instruments has been compared by analysing a set of laboratory specimens prepared and treated with variable amounts of products belonging to three classes of polymers; the spectroscopic investigation highlighted, for the first time, the limits and the advantages of portable Raman and portable mid-FTIR reflectance instruments in the detection of small amounts of products commonly employed for the conservation of plasters.
- 30 September 2011
- Published by Elsevier in European Polymer Journal
- Vol. 47 (9) , 1725-1735
Nanoscale structure and morphology of thin films of poly(2-chloroxylylene) synthesized by the CVD method on different liquids
- 30 September 2011
- Published by Elsevier in European Polymer Journal
- Vol. 47 (9) , 1725-1735
Nanoscale structure and morphology of thin films of poly(2-chloroxylylene) synthesized by the CVD method on different liquids
- 19 January 2011
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 42 (6) , 1207-1214
Retinal in bacteriorhodopsin and related molecular models investigated with Raman spectroscopy and density functional theory calculations
- 19 January 2011
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 42 (6) , 1207-1214
Retinal in bacteriorhodopsin and related molecular models investigated with Raman spectroscopy and density functional theory calculations
- 18 September 2009
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 41 (3) , 256-267
Fiber‐optic SERS sensor with optimized geometry: testing and optimization
A unique, geometry‐optimized, surface‐enhanced Raman scattering (SERS) fiber‐optic sensor has been recently developed and built. Though this class of sensors can be very useful in many applications, their use is greatly hindered by the fact that their reusability can hardly be achieved because of the irreversible adsorption of the analyte molecules on the SERS‐active substrate. Different substrates have been tested on our sensor with the purpose of increasing its reusability by means of cleaning procedures or good reproducibility in manufacturing the sensor, keeping, however, the same enhancement. We show that a partial reusability of the sensor is possible using SERS‐active substrates prepared by a standard process of immobilization of silver nanoparticles with 3‐aminopropyltrimethoxysilane. We also show that a fairly good reproducibility can be achieved with a low‐cost substrate realized in a short time by depositing a layer of polyvinyl alcohol (PVA) containing silver nanoparticles on the etched fiber tip. We prove as well that measurements are possible even with nanoparticles dispersed in the analyte solution instead of using a substrate directly made on the sensor tip. Finally, we have successfully tested our sensor with some molecules cited in EFSA (European Food Safety Authority) and FDA (Food and Drug Administration) reports as molecules for which new detection methods are necessary. Copyright © 2009 John Wiley & Sons, Ltd.
- 18 September 2009
- Published by Wiley in Journal of Raman Spectroscopy
- Vol. 41 (3) , 256-267
Fiber‐optic SERS sensor with optimized geometry: testing and optimization
A unique, geometry‐optimized, surface‐enhanced Raman scattering (SERS) fiber‐optic sensor has been recently developed and built. Though this class of sensors can be very useful in many applications, their use is greatly hindered by the fact that their reusability can hardly be achieved because of the irreversible adsorption of the analyte molecules on the SERS‐active substrate. Different substrates have been tested on our sensor with the purpose of increasing its reusability by means of cleaning procedures or good reproducibility in manufacturing the sensor, keeping, however, the same enhancement. We show that a partial reusability of the sensor is possible using SERS‐active substrates prepared by a standard process of immobilization of silver nanoparticles with 3‐aminopropyltrimethoxysilane. We also show that a fairly good reproducibility can be achieved with a low‐cost substrate realized in a short time by depositing a layer of polyvinyl alcohol (PVA) containing silver nanoparticles on the etched fiber tip. We prove as well that measurements are possible even with nanoparticles dispersed in the analyte solution instead of using a substrate directly made on the sensor tip. Finally, we have successfully tested our sensor with some molecules cited in EFSA (European Food Safety Authority) and FDA (Food and Drug Administration) reports as molecules for which new detection methods are necessary. Copyright © 2009 John Wiley & Sons, Ltd.
- 2 September 2008
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 55, 1-6
Realization of Photochromic-Polymeric Films for Optical Applications
The peculiar property of reversible change of the refractive index (Δn) of photochromic systems, is suitably exploited to realize volume phase holographic gratings (VPHGs), which are finding applications in optics and in spectroscopic instrumentations. A large modulation of the refractive index between the two photochromic states and a relatively thick layer of good optical quality are the fundamental requirements for the materials to achieve a good diffraction efficiency. A backbone diarylethene polymer which combines good processing properties with a proper photochromic sensitivity is synthesised and studied. The large Δn between the two isomer states (i.e. Δn=0.03 measured at 1500 nm and the value is even higher at shorter wavelengths, approaching 0.1 near the visible) and the high transparency in the near infrared range make it a promising substrate for the realization of efficient VPHGs. First prototype of VPHGs based on photochromic diarylethene polymer films has been written by transferring the pattern of lines from a master and its functionality is shown.
- 2 September 2008
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 55, 1-6
Realization of Photochromic-Polymeric Films for Optical Applications
The peculiar property of reversible change of the refractive index (Δn) of photochromic systems, is suitably exploited to realize volume phase holographic gratings (VPHGs), which are finding applications in optics and in spectroscopic instrumentations. A large modulation of the refractive index between the two photochromic states and a relatively thick layer of good optical quality are the fundamental requirements for the materials to achieve a good diffraction efficiency. A backbone diarylethene polymer which combines good processing properties with a proper photochromic sensitivity is synthesised and studied. The large Δn between the two isomer states (i.e. Δn=0.03 measured at 1500 nm and the value is even higher at shorter wavelengths, approaching 0.1 near the visible) and the high transparency in the near infrared range make it a promising substrate for the realization of efficient VPHGs. First prototype of VPHGs based on photochromic diarylethene polymer films has been written by transferring the pattern of lines from a master and its functionality is shown.