WYWilliam C. Young

William C. Young

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


William C. Young has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Trinexapac-ethyl rate and application timing effects on seed yield and yield components in tall fescue

    by Thomas G. Chastain, William C. Young, Carol J. Garbacik, Thomas B. Silberstein


  • Performance of trinexapac-ethyl on Lolium perenne seed crops in diverse lodging environments

    by Thomas G. Chastain, William C. Young, T.B. Silberstein, Carol J. Garbacik


  • Residue Management of Perennial Ryegrass and Tall Fescue Seed Crops

    by William C. Young, Mark E. Mellbye, Thomas B. Silberstein

    Regulations on open‐field burning have forced grass seed growers to adopt alternatives for postharvest residue management. Experiments were conducted on fields established by grass seed producers in western Oregon to compare effects of (i) mechanical straw removal and flail‐chopping the stubble (flail‐chop), (ii) mechanical straw removal and propane‐burning the stubble (propane‐burn), and (iii) open‐field burning the residue (open‐burn) on seed yield the following year. Treatments were tested on three consecutive crop years of perennial ryegrass (Lolium perenne L. cv. Regal and Pleasure) and tall fescue (Festuca arundinacea Schreb. cv. Martin and Rebel II). Seed yield components were measured to identify the components through which treatments affect yield. Treatments did not affect seed yield of Regal perennial ryegrass and Martin tall fescue in any crop year. Third‐crop seed yield of Pleasure perennial ryegrass was 15% higher for the open‐burn than for the flail‐chop treatment; fourth‐crop seed yield was 12% higher for the open‐burn treatment than for either flail‐chop or propane‐burn. Across years, seed yields of Rebel II tall fescue for propane‐burn and open‐burn treatments were 8 and 12% greater, respectively, than for flail‐chop. Where seed yields were affected, differences among treatments were through changes in seed number per unit area (seeds m−2), but seed weight was relatively stable. Treatments did not affect the number of fertile tillers in any cultivar. Variations in seed number were apparently due to treatment effects on the number of seeds set per tiller. We conclude that the need for postharvest residue burning in perennial ryegrass and tall fescue is cultivar specific. Mechanical residue removal is apparently as effective as open‐field burning for maintaining high seed yields in some cultivars of these grasses.


  • Spring‐Applied Nitrogen and Productivity of Cool‐Season Grass Seed Crops

    by William C. Young, David O. Chilcote, Harold W. Youngberg

    Understanding effects of spring N rates and application timing on seed yield and yield components of cool‐season grass seed crops will help improve N fertilization management. We tested effects of 90, 120, 150, 180, and 210 kg N ha−1, applied at the double‐ridge (DR) stage of development on seed yield and yield components of Chewing's fescue [Festuca rubra L.subsp. fallax (Thuill.) Nyman; syn. F. rubra var. commutata Gaudin], tall fescue (F. arundinacea Schreb.), and orchardgrass (Dactylis glomerata L.) in 1985 and 1986. In a second study, effects of 120 kg N ha−1, applied either at DR, at spikelet initiation (SI), or equally split between the two stages, were tested. Soil type for both experiments was fine‐silty, mixed, mesic Aquultic Argixerolls. Chewing's fescue seed yield was not affected by N rates in 1985 and was the greatest at 90 kg N ha−1 in 1986. Averaged across years, orchardgrass seed yield was the greatest at 120 kg N ha−1. Nitrogen rates did not affect seed yield of tall fescue. Seed yield of all species was most closely correlated with the number of seeds produced per unit area. Seed number per unit area was primarily correlated with the number of seeds produced per panicle in all species; in orchardgrass, the number of panicles per unit area also contributed to total number of seeds produced. Seed yields of all three species were the greatest when N was applied at DR. Split application was not better than application of all N at DR or SI. We concluded that in western Oregon spring application of 90 kg N ha−1 for Chewing's fescue and tall fescue and 120 kg N ha−1 for orchardgrass should be adequate for seed production. For all species, spring N should be applied in one application at DR.


  • Chemical Dwarfing and the Response of Cool‐Season Grass Seed Crops to Spring‐Applied Nitrogen

    by William C. Young, David O. Chilcote, Harold W. Youngberg

    Seed yield response of cool‐season grasses to spring‐applied N is usually limited because of lodging. This study investigated whether chemical dwarfing of these crops improves their seed yield response to spring‐applied N. Chewing's fescue [Festuca rubra L. subsp. fallax (Thuill.) Nyman; syn. F. rubra var. commutata Gaudin], tall fescue (Festuca arundinacea Schreb.), and orchardgrass (Dactylis glomerata L.) were established in September 1983 near Corvallis, OR. Treatments were all combinations of 90, 120, 150, 180, and 210 kg N ha−1 applied at the double‐ridge stage of development, followed by paclobutrazol [(2RS,3RS)‐l‐(4‐chlorophenyl)‐4,4‐dimethyl‐2‐(1H1,2,4‐triazol‐1‐yl)‐pentan‐3‐ol] at 0, 0.25, 0.5, and 1 kg a.i. ha−1 applied at floret initiation stage in 1985 and 1986. Averaged across years and N rates, the 1 kg ha−1 rate reduced Chewing's fescue height by 23% and tall fescue and orchardgrass heights by 30%. In the absence of paclobutrazol, Chewing's fescue and tall fescue seed yields were the greatest at 90 kg N ha−1. Paclobutrazol did not affect seed yield response of Chewing's fescue to N rates, but tall fescue seed yield in 1986 was the greatest at 150 kg N ha−1 when only 0.25 kg a.i. paclobutrazol ha−1 was applied. Averaged across N rates, the 0.5 kg ha−1 rate increased Chewing's fescue seed yield by 32% in 1985 and 18% in 1986, and also increased tall fescue seed yield by 32% in 1985 and 23% in 1986. Orchardgrass seed yield was the greatest at 180 kg N ha−1 in both years. Paclobutrazol did not affect orchardgrass seed yield in 1985, and the 1 kg ha−1 rate decreased seed yield in 1986. We concluded that in western Oregon paclobutrazol application at floret initiation does not improve seed yield response of these crops to spring‐applied N, but it would significantly improve Chewing's fescue and tall fescue seed yield, regardless of the N rate applied. Results did not indicate any advantage for applying paclobutrazol on orchardgrass seed crop.


  • Management Studies on Seed Production of Turf‐Type Tall Fescue: I. Seed Yield

    by William C. Young, Harold W. Youngberg, Thomas B. Silberstein

    Tall fescue (Festuca arundinacea Schreber) is rapidly gaining popularity as a turfgrass. Limited information is available on seed yield response of turf‐type cultivars to seed production management practices. We tested effects of four management variables on seed yield of Bonanza (late‐maturing turf type), Rebel (mid‐maturing turf type), Falcon (early‐maturing turf type), and Fawn (forage type) tall fescue cultivars. Variables were spring‐applied N rates (100, 145, and 190 kg ha−1), N application timing (double‐ridge stage, spikelet initiation, and equally split between the two), row spacing (0.3 and 0.6 m), and post‐harvest residue managements after removing the straw (flailchopping or burning the stubble). Seed yields of the second through fifth crops were measured. Nitrogen application timing did not affect seed yield of any cultivar. Effects of the other three variables on seed yield interacted with each other. For both Fawn and Rebel, high seed yields were achieved when 100 kg N ha−1 was applied and residue was burned, irrespective of row spacing. Bonanza produced high seed yields with 145 kg N ha−1, 0.6‐m row spacing, and flail‐chopping. In contrast, 0.3‐m row spacing and residue burning was required for maximum seed yield in Falcon, whereas N rates did not have an effect. We conclude that seed yield responses of Fawn and Rebel to management practices are similar. Results further suggest that, compared with Fawn, the optimum spring N rate was higher for Bonanza seed production, and the optimum row spacing was narrower for Falcon seed production. Also, residue burning was needed for maintaining high seed yield in Fawn, Rebel, and Falcon, whereas, at optimum row spacing and N rate, mechanical removal of post‐harvest residue was as effective as burning for Bonanza seed production.


  • Management Studies on Seed Production of Turf‐Type Tall Fescue: II. Seed Yield Components

    by William C. Young, Harold W. Youngberg, Thomas B. Silberstein

    Information on how management affects seed yield components of turf‐type tall fescue (Festuca arundinacea Schreber) cultivars is needed to improve cultural practices for seed production. We tested factorial combinations of two post‐harvest residue managements (flailchopping or burning the stubble), two row spacing (0.3 and 0.6 m), three spring‐applied N rates (100, 145, and 190 kg ha−1), and three N application timings (double‐ridge, spikelet initiation, and equally split between the two) on seed yield components of turf‐type cultivars Falcon, Rebel, and Bonanza, and the forage cultivar Fawn. Seed yields of all cultivars were closely correlated with the number of seeds produced per unit area (m2), but yields were weakly and negatively correlated with weight per seed. Compared with flail‐chopping, burning the residue increased the numbers of fertile tillers, floret sites, and seeds per unit area in all cultivars. The number of seeds per unit area was not affected by row spacing in Fawn and Bonanza, but was increased at 0.3‐m row spacing in Falcon when the residue was burned, and was greater at 0.6‐m in Rebel when the residue was flail‐chopped. Increasing N rate above 100 kg ha‐1 decreased floret site utilization and seeds per unit area in Fawn, but did not affect these components in Falcon and Rebel. Seeds per unit area in Bonanza was the greatest at 145 kg N ha‐1. For all cultivars, N application timing had little effect on seeds per unit area. We conclude that management practices for the turf‐type cultivars should focus on maintaining a high number of fertile tillers throughout the stand life by burning post‐harvest residue. Using narrower row spacings for early‐ and mid‐maturing turf‐type cultivars also could increase the number of fertile tillers per unit area when the post‐harvest residue is burned. The optimum spring‐applied N rate for seed production is apparently greater for the late‐maturing turf types than for forage cultivars.


  • Post‐Harvest Residue Management of Creeping Red and Chewings Fescue Seed Crops

    by William C. Young, Gale A. Gingrich, Thomas B Silberstein, Bryon M. Quebbeman

    Legislative actions in the Pacific Northwest have greatly restricted the total area of grass seed crops that can be burned each year. Grass seed growers are searching for alternatives to postharvest residue burning. In on‐farm experiments in western Oregon, we compared four postharvest residue management methods for effects on seed yield of creeping red fescue (Festuca rubra L. subsp. rubra cv. Cindy) and Chewings fescue (Festuca rubra L. subsp. commutata Gaudin cv. Center). Treatments were (i) straw residue removed and stubble flail‐chopped (flail‐chop), (ii) straw residue removed and stubble close‐clipped and vacuum‐swept (close‐clip), (iii) straw residue removed and stubble propane‐burned (propane‐burn), and (iv) residue and stubble open‐burned with full straw load (open‐burn). Seed yield components were also measured, to identify the component through which treatments affected yield. Treatment effects on seed yield of both crops interacted with years. Averaged across years, creeping red fescue seed yield was 993, 903, 804, and 620 kg ha−1 for open‐burn, propane‐burn, close‐clip, and flail‐chop treatments, respectively. The greatest treatment effect was on number of panicles, and consequently on number of floret sites and seeds produced per unit area. The number of spikelets per panicle, florets per spikelet, and seeds produced per panicle were unaffected. Open‐burn also resulted in the fewest weed seeds and the highest purity of the harvested seed. Treatments affected Chewings fescue seed yield in only one year, when seed yield was 750, 680, 477, and 553 kg ha−1 for open‐burn, propaneburn, close‐clip, and flail‐chop treatments, respectively. Treatments did not affect the number of panicles or seeds produced per unit area in Chewings fescue, the number of weed seeds, or the purity of the harvested seed. We concluded that mechanical removal of postharvest residue in Chewings fescue can maintain seed yield and seed quality similar to open‐burn. In contrast, open‐burn is required to achieve maximum seed yield and seed quality in creeping red fescue.