Ming Zhong

A novel molecular-imprinted electrochemical sensor for 3,4-benzopyrene (3, 4-BaP) in food samples, with high sensitivity and selective detection, is introduced. Firstly, graphene oxide was modified onto a glassy carbon electrode (GCE) by electroreduction deposition to form an RGO/GCE sensing platform, thereby enhancing the sensitivity and stability of the sensor. Then, magnetic molecularly imprinted polymer-zeolite imidazole framework-8 (MMIP-ZIF-8) was synthesized in one step using the crystal growth method and modified onto RGO/GCE, endowing the sensor with good adsorption capacity and selectivity. The performance of the sensor for 3, 4-BaP was studied using differential pulse voltammetry (DPV), and the detection conditions of the constructed sensor were optimized. The results showed that under the optimal conditions, the constructed sensor exhibited a wide linear range (0.5 ~ 1000 nmol L⁻¹), a low limit of detection (0.16 nmol L⁻¹), and good selectivity and stability for the detection of 3, 4-BaP. It also showed a good recovery (99.74 ~ 102.58%) for the detection of 3, 4-BaP in actual corn meal samples. The MMIP-ZIF-8/RGO/GCE sensor developed has potential application prospects in the precise detection of 3, 4-BaP in food. Graphical Abstract

A novel type of magnetic molecularly imprinted polymers (MMIP) as the solid‐phase extraction sorbent was prepared, which can extract effectively the allocryptopine from the waster of Macleaya cordata (Willd) R. Br. In this study, MMIP was synthesized by using Fe₃O₄@SiO₂, 4‐vinyl‐pyridine, ethylene glycol dimethacrylate, and allocryptopine, and these ingredients worked as magnetic core, functional monomer, cross‐linker, and template, respectively. Concluded by the calculation of Gaussian 09 software, different ratio models of 4‐vinyl‐pyridine and allocryptopine were simulated, and the optimal ratio was 1:5 and the energy was −2205.34 kJ/mol. Transmission electron microscopy, vibration sample magnetometry, X‐ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis were used to determine the morphology and structure of MMIP. Furthermore, the results of adsorption experiments indicated that MMIP had high selectivity, excellent recyclability, and good adsorption performance (9.86 mg/g, 298 K). The adsorption process was consistent with the Langmuir adsorption isotherm (R² > 0.98, 298 K) and pseudo‐second‐order kinetics model (R² > 0.99, 298 K). After six times adsorption‐desorption experiments, the adsorption amount of MMIP only reduced to 8.5%. In the experiments of selective adsorption, MMIP has better adsorption properties for allocryptopine (ALL, C₂₁H₂₃NO₅) than those having the same functional group. The limit of detection (LOD) was 0.4 μg/mL. The relative standard deviation ranged from 0.09% to 0.72%. The recovery of allocryptopine in samples ranged from 93.60% to 106.19%. In addition, the synthesized complex had a certain adsorption effect on allocryptopine separating from the wastewater of Macleaya cordata (Willd) R. Br.

A novel type of magnetic molecularly imprinted polymer was prepared for the selective enrichment and isolation of chelerythrine from Macleaya cordata (Willd) R. Br. The magnetic molecularly imprinted polymers were prepared using functional Fe₃O₄@SiO₂ as a magnetic support, chelerythrine as template, methacrylic acid as functional monomer, and ethylene glycol dimethacrylate as cross‐linker. Density functional theory at the B3LYP/6‐31G (d, p) level with Gaussian 09 software was applied to calculate the interaction energies of chelerythrine, methacrylic acid and the complexes formed from chelerythrine and methacrylic acid in different ratios. The structural features and morphology of the synthesized polymers were characterized by using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, and vibration sample magnetometry. Adsorption experiments revealed that the magnetic molecularly imprinted polymers possessed rapid kinetics, high selectivity, and a higher binding capacity (7.96 mg/g) to chelerythrine than magnetic molecularly non‐imprinted polymers (2.36 mg/g). The adsorption process was in good agreement with the Langmuir adsorption isotherm and pseudo‐second‐order kinetics models. Furthermore, the magnetic molecularly imprinted polymers were successfully employed as adsorbents for the extraction and enrichment of chelerythrine from Macleaya cordata (Willd) R. Br. The results indicated that the magnetic molecularly imprinted polymers were suitable for the selective adsorption of chelerythrine from complex samples such as natural medical plants.

The purpose of the research was to investigate the multiple response optimizations for the extraction of protopine and allocryptopine from the stems of Macleaya cordata (Willd) R. Br. by using microwave‐assisted extraction (MAE). A three‐level, three‐factor Box–Behnken design of response surface methodology was used to develop response model, and desirability function was employed to optimize the effects of main extraction parameters. Three variables, ethanol concentration (20–80%, v/v), extraction temperature (30–70°C) and solvent/solid ratio (10:1 to 30:1, mL/g), were investigated in this study. The results showed that the optimum parameters of MAE were ethanol concentration of 45.2 % (v/v), extraction temperature of 54.7°C and solvent/solid ratio of 20.4:1 (mL/g). Under these conditions, the extraction yields of protopine and allocryptopine were 89.4 and 102.0%, respectively, and the extracta sicca yield was 12.5%. The combination use of response surface methodology, Box‐Behnken design and the appropriate desirability function could provide an insight into a lab‐scale MAE process, and help to develop procedures for commercial production of active ingredients from medical plants.