MVMyrto Valari

Myrto Valari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Myrto Valari has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    EXPLUME v1.0: a model for personal exposure to ambient O3 and PM2.5

    by Myrto Valari, Konstandinos Markakis, Emilie Powaga, Bernard Collignan, Olivier Perrussel

    This paper presents the first version of the regional-scale personal exposure model EXPLUME (EXposure to atmospheric PolLUtion ModEling). The model uses simulated gridded data of outdoor O3 and PM2.5 concentrations and several population and building-related datasets to simulate (1) space–time activity event sequences, (2) the infiltration of atmospheric contaminants indoors, and (3) daily aggregated personal exposure. The model is applied over the greater Paris region at 2 km×2 km resolution for the entire year of 2017. Annual averaged population exposure is discussed. We show that population mobility within the region, disregarding pollutant concentrations indoors, has only a small effect on average daily exposure. By contrast, considering the infiltration of PM2.5 in buildings decreases annual average exposure by 11 % (population average). Moreover, accounting for PM2.5 exposure during transportation (in vehicle, while waiting on subway platforms, and while crossing on-road tunnels) increases average population exposure by 5 %. We show that the spatial distribution of PM2.5 and O3 exposure is similar to the concentration maps over the region, but the exposure scale is very different when accounting for indoor exposure. We model large intra-population variability in PM2.5 exposure as a function of the transportation mode, especially for the upper percentiles of the distribution. Overall, 20 % of the population using bicycles or motorcycles is exposed to annual average PM2.5 concentrations above the EU target value (25 µg m−3), compared to 0 % for people travelling by car. Finally, we develop a 2050 horizon projection of the building stock to study how changes in the buildings' characteristics to comply with the thermal regulations will affect personal exposure. We show that exposure to ozone will decrease by as much as 14 % as a result of this projection, whereas there is no significant impact on exposure to PM2.5.


  • Open Access

    EXPLUME v1.0: a model for personal exposures to ambient O3 and PM2.5

    by Myrto Valari, Konstandinos Markakis, Emilie Powaga, Bernard Collignan, Olivier Perrussel

    This paper presents the first version of the regional scale personal exposure model EXPLUME. The model uses simulated gridded data of outdoor O3 and PM2.5 concentrations and several population and building-related datasets to simulate 1) space-time activity event sequences, 2) the infiltration of atmospheric contaminants indoors and 3) daily aggregated personal exposures. The model is applied over the greater Paris region at 2 km x 2 km resolution for the entire 2017 year. Annual averaged population exposures are discussed. We show that population mobility within the region, disregarding pollutant concentrations indoors, has only a small effect on average daily exposures. By contrast, considering the infiltration of PM2.5 in buildings decreases annual average exposure by 11 % (population average). Moreover, accounting for PM2.5 exposure during transportation (in-vehicle, while waiting on subway platforms, and while crossing on-road tunnels) increases average population exposure by 5 %. We show that the spatial distribution of PM2.5 and O3 exposures is similar to the concentration maps over the region, but the exposure scale is very different when accounting for indoor exposure. We model large intra-population variability in PM2.5 exposure as a function of the transportation mode, especially for the upper percentiles of the distribution. 20 % of the population using bicycles or motorcycles is exposed to annual average PM2.5 concentrations above the EU target value (25 µg/m3), compared to 0 % for people travelling by car. Finally, we develop a 2050–horizon projection of the building stock to study how changes in the buildings' characteristics to comply with the thermal regulations will affect personal exposures. We show that exposure to ozone will decrease by as much as 14 % as a result of this projection, whereas there is no significant impact on exposure to PM2.5.

  • Top Cited Papers
    Open Access

    CHIMERE-2017: from urban to hemispheric chemistry-transport modeling

    by Sylvain Mailler, Laurent Menut, Dmitry Khvorostyanov, Myrto Valari, Florian Couvidat, Guillaume Siour, Solène Turquety, Régis Briant, Paolo Tuccella, Bertrand Bessagnet, et al.

    CHIMERE is a chemistry-transport model designed for regional atmospheric composition. It can be used at a variety of scales from local to continental domains. However, due to the model design and its historical use as a regional model, major limitations had remained, hampering its use at hemispheric scale, due to the coordinate system used for transport as well as to missing processes that are important in regions outside Europe. Most of these limitations have been removed in the CHIMERE-2017 version, allowing its use in any region of the world and at any scale, from the scale of a single urban area up to hemispheric scale, with or without polar regions included. Other important improvements have been made in the treatment of the physical processes affecting aerosols and the emissions of mineral dust. From a computational point of view, the parallelization strategy of the model has also been updated in order to improve model numerical performance and reduce the code complexity. The present article describes all these changes. Statistical scores for a model simulation over continental Europe are presented, and a simulation of the circumpolar transport of volcanic ash plume from the Puyehue volcanic eruption in June 2011 in Chile provides a test case for the new model version at hemispheric scale.


  • Open Access

    CHIMERE-2016: From urban to hemispheric chemistry-transport modeling

    by Sylvain Mailler, Laurent Menut, Dmitry Khvorostyanov, Myrto Valari, Florian Couvidat, Guillaume Siour, Solène Turquety, Régis Briant, Paolo Tuccella, Bertrand Bessagnet, et al.

    CHIMERE is a chemistry-transport model initially designed for box-modelling of regional atmospheric composition. In the past decade, it has been converted into a 3D eulerian model that could be used at a variety of scales from local to continental domains. However, due to the model design and its historic use as a regional model, major limitations had remained, prohibiting its use at hemispheric scale, due to the coordinate system used for transport as well as to missing processes that are important in regions outside Europe. Most of these limitations have been lifted in the CHIMERE-2016 version, allowing its use in any region of the world and at any scale, from the scale of a single urban area up to hemispheric scale, including or not polar regions. Other important improvements have been brought in the treatment of the physical processes affecting aerosols and the emissions of mineral dust. From a computational point of view, the parallelization strategy of the model has also been improved in order to improve model numerical performance. The present article describes all these changes. Scores for a model simulation over continental Europe are presented, and a simulation of the circumpolar transport of volcanic ash plume from the Puyehue volcanic eruption in June 2011 in Chile provides a test case for the new model version at hemispheric scale.


  • Estimation des impacts sanitaires futurs de la pollution de l'air dans le monde, en Europe et Île-de-France : le projet A-C HIA

    by Victoria Likhvar, Didier Hauglustaine, Patrick Kinney, Augustin Colette, Myrto Valari, Konstandinos Markakis, Mathilde Pascal, Sylvia Medina

  • Open Access

    Mid-21st century air quality at the urban scale under the influence of changed climate and emissions – case studies for Paris and Stockholm

    by Konstantinos Markakis, Myrto Valari, Magnuz Engardt, Gwendoline Lacressonniere, Robert Vautard, Camilla Andersson

    Ozone, PM10 and PM2.5 concentrations over Paris, France and Stockholm, Sweden were modelled at 4 and 1 km horizontal resolutions respectively for the present and 2050 periods employing decade-long simulations. We account for large-scale global climate change (RCP-4.5) and fine-resolution bottom-up emission projections developed by local experts and quantify their impact on future pollutant concentrations. Moreover, we identify biases related to the implementation of regional-scale emission projections by comparing modelled pollutant concentrations between the fine- and coarse-scale simulations over the study areas. We show that over urban areas with major regional contribution (e.g. the city of Stockholm) the bias related to coarse-scale projections may be significant and lead to policy misclassification. Our results stress the need to better understand the mechanism of bias propagation across the modelling scales in order to design more successful local-scale strategies. We find that the impact of climate change is spatially homogeneous in both regions, implying strong regional influence. The climate benefit for ozone (daily mean and maximum) is up to −5 % for Paris and −2 % for Stockholm city. The climate benefit on PM2.5 and PM10 in Paris is between −5 and −10 %, while for Stockholm we estimate mixed trends of up to 3 % depending on season and size class. In Stockholm, emission mitigation leads to concentration reductions up to 15 % for daily mean and maximum ozone and 20 % for PM. Through a sensitivity analysis we show that this response is entirely due to changes in emissions at the regional scale. On the contrary, over the city of Paris (VOC-limited photochemical regime), local mitigation of NOx emissions increases future ozone concentrations due to ozone titration inhibition. This competing trend between the respective roles of emission and climate change, results in an increase in 2050 daily mean ozone by 2.5 % in Paris. Climate and not emission change appears to be the most influential factor for maximum ozone concentration over the city of Paris, which may be particularly interesting from a health impact perspective.


  • Open Access

    Mid-21st century air quality at the urban scale under the influence of changed climate and emissions: case studies for Paris and Stockholm

    by K. Markakis, M. Valari, M. Engardt, G. Lacressonnière, R. Vautard, C. Andersson

    Ozone, PM10 and PM2.5 concentrations over Paris, France and Stockholm, Sweden were modeled at 4 and 1 \\unit{km} horizontal resolutions respectively for the present and 2050 periods employing decade-long simulations. We account for large-scale global climate change (RCP-4.5) and fine resolution bottom-up emission projections developed by local experts and quantify their impact on future pollutant concentrations. Moreover, we identify biases related to the implementation of regional scale emission projections over the study areas by comparing modeled pollutant concentrations between the fine and coarse scale simulations. We show that over urban areas with major regional contribution (e.g., the city of Stockholm) the bias due to coarse emission inventory may be significant and lead to policy misclassification. Our results stress the need to better understand the mechanism of bias propagation across the modeling scales in order to design more successful local-scale strategies. We find that the impact of climate change is spatially homogeneous in both regions, implying strong regional influence. The climate benefit for ozone (daily average and maximum) is up to −5 % for Paris and −2 % for Stockholm city. The joined climate benefit on PM2.5 and PM10 in Paris is between −10 and −5 % while for Stockholm we observe mixed trends up to 3 % depending on season and size class. In Stockholm, emission mitigation leads to concentration reductions up to 15 % for daily average and maximum ozone and 20 % for PM and through a sensitivity analysis we show that this response is entirely due to changes in emissions at the regional scale. On the contrary, over the city of Paris (VOC-limited photochemical regime), local mitigation of NOx emissions increases future ozone concentrations due to ozone titration inhibition. This competing trend between the respective roles of emission and climate change, results in an increase in 2050 daily average ozone by 2.5 % in Paris. Climate and not emission change appears to be the most influential factor for maximum ozone concentration over the city of Paris, which may be particularly interesting in a health impact perspective.

  • Open Access

    Climate-forced air-quality modeling at the urban scale: sensitivity to model resolution, emissions and meteorology

    by K. Markakis, M. Valari, O. Perrussel, O. Sanchez, C. Honore

    While previous research helped to identify and prioritize the sources of error in air-quality modeling due to anthropogenic emissions and spatial scale effects, our knowledge is limited on how these uncertainties affect climate-forced air-quality assessments. Using as reference a 10-year model simulation over the greater Paris (France) area at 4 km resolution and anthropogenic emissions from a 1 km resolution bottom-up inventory, through several tests we estimate the sensitivity of modeled ozone and PM2.5 concentrations to different potentially influential factors with a particular interest over the urban areas. These factors include the model horizontal and vertical resolution, the meteorological input from a climate model and its resolution, the use of a top-down emission inventory, the resolution of the emissions input and the post-processing coefficients used to derive the temporal, vertical and chemical split of emissions. We show that urban ozone displays moderate sensitivity to the resolution of emissions (~ 8 %), the post-processing method (6.5 %) and the horizontal resolution of the air-quality model (~ 5 %), while annual PM2.5 levels are particularly sensitive to changes in their primary emissions (~ 32 %) and the resolution of the emission inventory (~ 24 %). The air-quality model horizontal and vertical resolution have little effect on model predictions for the specific study domain. In the case of modeled ozone concentrations, the implementation of refined input data results in a consistent decrease (from 2.5 up to 8.3 %), mainly due to inhibition of the titration rate by nitrogen oxides. Such consistency is not observed for PM2.5. In contrast this consistency is not observed for PM2.5. In addition we use the results of these sensitivities to explain and quantify the discrepancy between a coarse (~ 50 km) and a fine (4 km) resolution simulation over the urban area. We show that the ozone bias of the coarse run (+9 ppb) is reduced by ~ 40 % by adopting a higher resolution emission inventory, by 25 % by using a post-processing technique based on the local inventory (same improvement is obtained by increasing model horizontal resolution) and by 10 % by adopting the annual emission totals of the local inventory. The bias of PM2.5 concentrations follows a more complex pattern, with the positive values associated with the coarse run (+3.6 μg m−3), increasing or decreasing depending on the type of the refinement. We conclude that in the case of fine particles, the coarse simulation cannot selectively incorporate local-scale features in order to reduce its error.


  • A multi-scale health impact assessment of air pollution over the 21st century

    by Victoria N. Likhvar, Mathilde Pascal, Konstantinos Markakis, Augustin Colette, Didier Hauglustaine, Myrto Valari, Zbigniew Klimont, Sylvia Medina, Patrick Kinney


  • Open Access

    Climate forced air-quality modeling at urban scale: sensitivity to model resolution, emissions and meteorology

    by K. Markakis, M. Valari, O. Perrussel, O. Sanchez, C. Honore

    While previous research helped to identify and prioritize the sources of error in air-quality modeling due to anthropogenic emissions and spatial scale effects our knowledge is limited on how these uncertainties affect climate forced air-quality assessments. Using as reference a 10 yr model simulation over the greater Paris (France) area at 4 km resolution and anthropogenic emissions from a 1 km resolution bottom-up inventory, through several tests we estimate the sensitivity of modeled ozone and PM2.5 concentrations to different potentially influential factors with a particular interest over the urban areas. These factors include the model horizontal and vertical resolution, the meteorological input from a climate model and its resolution, the use of a top-down emission inventory, the resolution of the emissions input and the post-processing coefficients used to derive the temporal, vertical and chemical split of emissions. We show that urban ozone displays moderate sensitivity to the resolution of emissions (~8%), the post-processing method (6.5%) and model resolution (~5) while annual PM2.5 levels are particularly sensitive to changes in their primary emissions (~32%) and the resolution of the emission inventory (~24%) while model horizontal and vertical resolution are of little effect. In addition we use the results of these sensitivities to explain and quantify the discrepancy between a coarse (~50 km) and a fine (4 km) resolution simulation over the urban area. We show that the ozone bias of the coarse run (+9 ppb) is reduced by ~40% by adopting a higher resolution emission inventory, by 25% by using a post-processing technique based on the local inventory (same improvement is obtained by increasing model horizontal resolution) and by 10% by adopting the annual emission totals of the local inventory. The bias on PM2.5 follows a more complex pattern with the positive bias associated to the coarse run (+3.6 μg m3) increasing or decreasing depending on the type of the refinement. We conclude that in the case of fine particles the coarse simulation cannot selectively incorporate local scale features in order to reduce model error.