Wenning N. Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wenning N. Liu has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Ahmed Khaleel
Qatar Foundation
4 shared publications - Xin Sun
Oak Ridge National Laboratory
4 shared publications - Brian J. Koeppel
Pacific Northwest National Laboratory
2 shared publications Elizabeth Stephens
Pacific Northwest National Laboratory, Richland, Washington 99354
2 shared publications- Elizabeth V. Stephens
Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, WA 99352, USA
1 shared publication Moe Khaleel
Pacific Northwest National Laboratory
1 shared publication
Latest Publications
- 5 January 2011
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 8 (1) , 49-59
Creep Behavior of Glass/Ceramic Sealant and its Effect on Long‐Term Performance of Solid Oxide Fuel Cells
The creep behavior of glass or glass–ceramic sealant materials used in solid oxide fuel cells (SOFCs) becomes relevant under SOFC operating temperatures. In this paper, the creep of glass–ceramic sealants was experimentally examined, and a standard linear solid model was applied to capture the creep behavior of glass–ceramic sealant materials developed for planar SOFCs at high temperatures. The parameters of this model were determined based on the creep test results. Furthermore, the creep model was incorporated into finite‐element software programs SOFC‐MP and Mentat‐FC developed at Pacific Northwest National Laboratory for multiphysics simulation of SOFCs. The effect of creep of glass–ceramic sealant materials on the long‐term performance of SOFC stacks was investigated by studying the stability of the flow channels and the stress redistribution in the glass seal and on the various interfaces of the glass seal with other layers. Finite‐element analyses were performed to quantify the stresses in various parts. The stresses in glass seals were released because of creep behavior during operations.
- 5 January 2011
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 8 (1) , 49-59
Creep Behavior of Glass/Ceramic Sealant and its Effect on Long‐Term Performance of Solid Oxide Fuel Cells
The creep behavior of glass or glass–ceramic sealant materials used in solid oxide fuel cells (SOFCs) becomes relevant under SOFC operating temperatures. In this paper, the creep of glass–ceramic sealants was experimentally examined, and a standard linear solid model was applied to capture the creep behavior of glass–ceramic sealant materials developed for planar SOFCs at high temperatures. The parameters of this model were determined based on the creep test results. Furthermore, the creep model was incorporated into finite‐element software programs SOFC‐MP and Mentat‐FC developed at Pacific Northwest National Laboratory for multiphysics simulation of SOFCs. The effect of creep of glass–ceramic sealant materials on the long‐term performance of SOFC stacks was investigated by studying the stability of the flow channels and the stress redistribution in the glass seal and on the various interfaces of the glass seal with other layers. Finite‐element analyses were performed to quantify the stresses in various parts. The stresses in glass seals were released because of creep behavior during operations.
- 17 November 2010
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 42 (5) , 1222-1228
Interfacial Shear Strength of Oxide Scale and SS 441 Substrate
- 17 November 2010
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 42 (5) , 1222-1228
Interfacial Shear Strength of Oxide Scale and SS 441 Substrate
- 3 August 2010
- Published by Wiley in Fuel Cells
- Vol. 10 (4) , 703-717
Effect of Creep of Ferritic Interconnect on Long‐Term Performance of Solid Oxide Fuel Cell Stacks
- 3 August 2010
- Published by Wiley in Fuel Cells
- Vol. 10 (4) , 703-717
Effect of Creep of Ferritic Interconnect on Long‐Term Performance of Solid Oxide Fuel Cell Stacks
- 1 March 2010
- Published by Office of Scientific and Technical Information (OSTI)
Investigation of Performance of SCN-1 Pure Glass as Sealant Used in SOFC
As its name implies, self-healing glass seal has the potential of restoring its mechanical properties upon being reheated to stack operating temperature, even when it has experienced some cooling induced damage/crack at room temperature. Such a self-healing feature is desirable for achieving high seal reliability during thermal cycling. On the other hand, self-healing glass is also characterized by its low mechanical stiffness and high creep rate at the typical operating temperature of SOFCs. Therefore, from a design’s perspective, it is important to know the long term geometric stability and thermal mechanical behaviors of the self-healing glass under the stack operating conditions. These predictive capabilities will guide the design and optimization of a reliable sealing system that potentially utilizes self-healing glass as well as other ceramic seal components in achieving the ultimate goal of SOFC. In this report, we focused on predicting the effects of various generic seal design parameters on the stresses in the seal. For this purpose, we take the test cell used in the leakage test for compliant glass seals conducted in PNNL as our initial modeling geometry. The effect of the ceramic stopper on the geometry stability of the self-healing glass sealants is studied first. Then wemore » explored the effect of various interfaces such as stopper and glass, stopper and PEN, as well stopper and IC plate, on the geometry stability and reliability of glass during the operating and cooling processes.« less
- 1 March 2010
- Published by Office of Scientific and Technical Information (OSTI)
Investigation of Performance of SCN-1 Pure Glass as Sealant Used in SOFC
As its name implies, self-healing glass seal has the potential of restoring its mechanical properties upon being reheated to stack operating temperature, even when it has experienced some cooling induced damage/crack at room temperature. Such a self-healing feature is desirable for achieving high seal reliability during thermal cycling. On the other hand, self-healing glass is also characterized by its low mechanical stiffness and high creep rate at the typical operating temperature of SOFCs. Therefore, from a design’s perspective, it is important to know the long term geometric stability and thermal mechanical behaviors of the self-healing glass under the stack operating conditions. These predictive capabilities will guide the design and optimization of a reliable sealing system that potentially utilizes self-healing glass as well as other ceramic seal components in achieving the ultimate goal of SOFC. In this report, we focused on predicting the effects of various generic seal design parameters on the stresses in the seal. For this purpose, we take the test cell used in the leakage test for compliant glass seals conducted in PNNL as our initial modeling geometry. The effect of the ceramic stopper on the geometry stability of the self-healing glass sealants is studied first. Then wemore » explored the effect of various interfaces such as stopper and glass, stopper and PEN, as well stopper and IC plate, on the geometry stability and reliability of glass during the operating and cooling processes.« less
- 4 January 2010
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 7 (1) , 22-29
Experimental Study of the Aging and Self‐Healing of the Glass/Ceramic Sealant Used in SOFCs
High operating temperatures of solid oxide fuel cells (SOFCs) require that the sealant must function at a high temperature between 600°C and 900°C and in the oxidizing and reducing environments of fuel and air. This paper describes tests to investigate the temporal evolution of the volume fraction of ceramic phases, the evolution of micro‐damage, and the self‐healing behavior of the glass–ceramic sealant used in SOFCs. It was found that after the initial sintering process, further crystallization of the glass–ceramic sealant does not stop, but slows down and reduces the residual glass content while boosting the ceramic crystalline content. Under a long‐term operating environment, distinct fibrous and needle‐like crystals in the amorphous phase disappeared, and smeared/diffused phase boundaries between the glass phase and ceramic phase were observed. Meanwhile, the micro‐damage was induced by the cooling down process from the operating temperature to room temperature, which can potentially degrade the mechanical properties of the glass/ceramic sealant. The glass/ceramic sealant exhibited self‐healing upon reheating to the SOFC operating temperature, which can restore the mechanical performance of the glass/ceramic sealant.
- 4 January 2010
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 7 (1) , 22-29
Experimental Study of the Aging and Self‐Healing of the Glass/Ceramic Sealant Used in SOFCs
High operating temperatures of solid oxide fuel cells (SOFCs) require that the sealant must function at a high temperature between 600°C and 900°C and in the oxidizing and reducing environments of fuel and air. This paper describes tests to investigate the temporal evolution of the volume fraction of ceramic phases, the evolution of micro‐damage, and the self‐healing behavior of the glass–ceramic sealant used in SOFCs. It was found that after the initial sintering process, further crystallization of the glass–ceramic sealant does not stop, but slows down and reduces the residual glass content while boosting the ceramic crystalline content. Under a long‐term operating environment, distinct fibrous and needle‐like crystals in the amorphous phase disappeared, and smeared/diffused phase boundaries between the glass phase and ceramic phase were observed. Meanwhile, the micro‐damage was induced by the cooling down process from the operating temperature to room temperature, which can potentially degrade the mechanical properties of the glass/ceramic sealant. The glass/ceramic sealant exhibited self‐healing upon reheating to the SOFC operating temperature, which can restore the mechanical performance of the glass/ceramic sealant.