Janos Hajdu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Janos Hajdu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Beata Ziaja
Department of Biochemistry Biomedical Centre Uppsala University Box 576 S-75123 Uppsala Sweden
8 shared publications - Abraham Szoeke
Department of Biochemistry Biomedical Centre Uppsala University Box 576 S-75123 Uppsala Sweden
6 shared publications - David van der Spoel
Department of Cell and Molecular Biology, Uppsala University, Uppsala, Sweden
6 shared publications - Richard A. London
Lawrence Livermore National Laboratory , Livermore, California 94551
2 shared publications Abraham Szöke
Department of Biochemistry, Biomedical Centre, Box 576, Uppsala University, S-75123 Uppsala, Sweden
1 shared publication- B. Ziaja
Department of Theoretical Physics Institute of Nuclear Physics Radzikowskiego 152 31-342 Cracow Poland
1 shared publication
Latest Publications
- Open Access
Ionization by Impact Electrons in Solids: Electron Mean Free Path Fitted Over a Wide Energy Range
We propose a simple formula for fitting the electron mean free paths in solids both at high and at low electron energies. The free-electron-gas approximation used for predicting electron mean free paths is no longer valid at low energies (E < 50 eV), as the band structure effects become significant at those energies. Therefore we include the results of the band structure calculations in our fit. Finally, we apply the fit to 9 elements and 2 compounds.
Open AccessIonization by Impact Electrons in Solids: Electron Mean Free Path Fitted Over a Wide Energy Range
We propose a simple formula for fitting the electron mean free paths in solids both at high and at low electron energies. The free-electron-gas approximation used for predicting electron mean free paths is no longer valid at low energies (E < 50 eV), as the band structure effects become significant at those energies. Therefore we include the results of the band structure calculations in our fit. Finally, we apply the fit to 9 elements and 2 compounds.
- 4 March 2005
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 97 (6)
Unified model of secondary electron cascades in diamond
In this article we present a detailed and unified theoretical treatment of secondary electron cascades that follow the absorption of x-ray photons. A Monte Carlo model has been constructed that treats in detail the evolution of electron cascades induced by photoelectrons and by Auger electrons following inner shell ionizations. Detailed calculations are presented for cascades initiated by electron energies between 0.1 and . The present article expands our earlier work [B. Ziaja, D. van der Spoel, A. Szöke, and J. Hajdu, Phys. Rev. B 64, 214104 (2001), Phys. Rev. B 66, 024116 (2002)] by extending the primary energy range, by improving the treatment of secondary electrons, especially at low electron energies, by including ionization by holes, and by taking into account their coupling to the crystal lattice. The calculations describe the three-dimensional evolution of the electron cloud, and monitor the equivalent instantaneous temperature of the free electron gas as the system cools. The dissipation of the impact energy proceeds predominantly through the production of secondary electrons whose energies are comparable to the binding energies of the valence and of the core electrons . The electron cloud generated by a electron is strongly anisotropic in the early phases of the cascade . At later times, the sample is dominated by low energy electrons, and these are scattered more isotropically by atoms in the sample. Our results for the total number of secondary electrons agree with available experimental data, and show that the emission of secondary electrons approaches saturation within about following the primary impact.- 4 March 2005
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 97 (6)
Unified model of secondary electron cascades in diamond
In this article we present a detailed and unified theoretical treatment of secondary electron cascades that follow the absorption of x-ray photons. A Monte Carlo model has been constructed that treats in detail the evolution of electron cascades induced by photoelectrons and by Auger electrons following inner shell ionizations. Detailed calculations are presented for cascades initiated by electron energies between 0.1 and . The present article expands our earlier work [B. Ziaja, D. van der Spoel, A. Szöke, and J. Hajdu, Phys. Rev. B 64, 214104 (2001), Phys. Rev. B 66, 024116 (2002)] by extending the primary energy range, by improving the treatment of secondary electrons, especially at low electron energies, by including ionization by holes, and by taking into account their coupling to the crystal lattice. The calculations describe the three-dimensional evolution of the electron cloud, and monitor the equivalent instantaneous temperature of the free electron gas as the system cools. The dissipation of the impact energy proceeds predominantly through the production of secondary electrons whose energies are comparable to the binding energies of the valence and of the core electrons . The electron cloud generated by a electron is strongly anisotropic in the early phases of the cascade . At later times, the sample is dominated by low energy electrons, and these are scattered more isotropically by atoms in the sample. Our results for the total number of secondary electrons agree with available experimental data, and show that the emission of secondary electrons approaches saturation within about following the primary impact.- Open Access
Electron Cascades Produced by Photoelectrons in Diamond
Secondary electron cascades are responsible for significant ionizations in macroscopic samples during irradiation with X-rays. A quantitative analysis of these cascades is needed, e.g. for assessing damage in optical components at X-ray free-electron lasers, and for understanding damage in samples exposed to the beam. Here we present results from Monte Carlo simulations, showing the space-time evolution of secondary electron cascades in diamond. These cascades follow the impact of a single primary electron at energies between 0.5-12 keV, representing the usual range for photoelectrons. The calculations describe the secondary ionizations caused by these electrons, the three-dimensional evolution of the electron cloud, and monitor the equivalent instantaneous temperature of the free-electron gas as the system cools during expansion. The dissipation of the impact energy proceeds predominantly through the production of secondary electrons whose energies are comparable to the binding energies of the valence (40-50 eV) and the core electrons (300 eV) in accordance with experiments and the models of interactions. The electron cloud generated by a 12 keV electron is strongly anisotropic in the early phases of the cascade (t <= 1 fs). At later times, the sample is dominated by low energy electrons, and these are scattered more isotropically by atoms in the sample. The results show that the emission of secondary electrons approaches saturation within about 100 fs, following the primary impact. At an impact energy of 12 keV, the total number of electrons liberated in the sample is <= 400 at 1000 fs. The results provide an understanding of ionizations by photoelectrons, and extend earlier models on low-energy electron cascades (E=0.25 keV, [ziaja,ziaja2]) to the higher energy regime of the photoelectrons.
Open AccessElectron Cascades Produced by Photoelectrons in Diamond
Secondary electron cascades are responsible for significant ionizations in macroscopic samples during irradiation with X-rays. A quantitative analysis of these cascades is needed, e.g. for assessing damage in optical components at X-ray free-electron lasers, and for understanding damage in samples exposed to the beam. Here we present results from Monte Carlo simulations, showing the space-time evolution of secondary electron cascades in diamond. These cascades follow the impact of a single primary electron at energies between 0.5-12 keV, representing the usual range for photoelectrons. The calculations describe the secondary ionizations caused by these electrons, the three-dimensional evolution of the electron cloud, and monitor the equivalent instantaneous temperature of the free-electron gas as the system cools during expansion. The dissipation of the impact energy proceeds predominantly through the production of secondary electrons whose energies are comparable to the binding energies of the valence (40-50 eV) and the core electrons (300 eV) in accordance with experiments and the models of interactions. The electron cloud generated by a 12 keV electron is strongly anisotropic in the early phases of the cascade (t <= 1 fs). At later times, the sample is dominated by low energy electrons, and these are scattered more isotropically by atoms in the sample. The results show that the emission of secondary electrons approaches saturation within about 100 fs, following the primary impact. At an impact energy of 12 keV, the total number of electrons liberated in the sample is <= 400 at 1000 fs. The results provide an understanding of ionizations by photoelectrons, and extend earlier models on low-energy electron cascades (E=0.25 keV, [ziaja,ziaja2]) to the higher energy regime of the photoelectrons.
- 19 July 2002
- Published by American Physical Society (APS) in Physical Review B
- Vol. 66 (2) , 024116
Space-time evolution of electron cascades in diamond
The impact of a primary electron initiates a cascade of secondary electrons in solids, and these cascades play a significant role in the dynamics of ionization. Here we describe model calculations to follow the spatiotemporal evolution of secondary electron cascades in diamond. The band structure of the insulator has been explicitly incorporated into the calculations as it affects ionizations from the valence band. A Monte Carlo model was constructed to describe the path of electrons following the impact of a single electron of energy This energy is similar to the energy of an Auger electron from carbon. Two limiting cases were considered: the case in which electrons transmit energy to the lattice, and the case where no such energy transfer is permitted. The results show the evolution of the secondary electron cascades in terms of the number of electrons liberated, the spatial distribution of these electrons, and the energy distribution among the electrons as a function of time. The predicted ionization rates electrons in 100 fs) lie within the limits given by experiments and phenomenological models. Calculation of the local electron density and the corresponding Debye length shows that the latter is systematically larger than the radius of the electron cloud, and it increases exponentially with the radial size of the cascade. This means that the long-range Coulomb field is not shielded within this cloud, and the electron gas generated does not represent a plasma in a single impact cascade triggered by an electron of energy. This is important as it justifies the independent-electron approximation used in the model. At the (average) spatial distribution of secondary electrons is anisotropic with the electron cloud elongated in the direction of the primary impact. The maximal radius of the cascade is about at this time. At the cascade has a maximal radius of and is already dominated by low-energy electrons These electrons do not contribute to ionization but exchange energies with the lattice. As the system cools, energy is distributed more equally, and the spatial distribution of the electron cloud becomes isotropic. At 90 fs, the maximal radius is about 150 Å. An analysis of the ionization fraction shows that the ionization level needed to create an Auger electron plasma in diamond will be reached with a dose of impact x-ray photons per if these photons arrive before the cascade electrons recombine. The Monte Carlo model described here could be adopted for the investigation of radiation damage in other insulators and has implications for planned experiments with intense femtosecond x-ray sources.- 19 July 2002
- Published by American Physical Society (APS) in Physical Review B
- Vol. 66 (2) , 024116
Space-time evolution of electron cascades in diamond
The impact of a primary electron initiates a cascade of secondary electrons in solids, and these cascades play a significant role in the dynamics of ionization. Here we describe model calculations to follow the spatiotemporal evolution of secondary electron cascades in diamond. The band structure of the insulator has been explicitly incorporated into the calculations as it affects ionizations from the valence band. A Monte Carlo model was constructed to describe the path of electrons following the impact of a single electron of energy This energy is similar to the energy of an Auger electron from carbon. Two limiting cases were considered: the case in which electrons transmit energy to the lattice, and the case where no such energy transfer is permitted. The results show the evolution of the secondary electron cascades in terms of the number of electrons liberated, the spatial distribution of these electrons, and the energy distribution among the electrons as a function of time. The predicted ionization rates electrons in 100 fs) lie within the limits given by experiments and phenomenological models. Calculation of the local electron density and the corresponding Debye length shows that the latter is systematically larger than the radius of the electron cloud, and it increases exponentially with the radial size of the cascade. This means that the long-range Coulomb field is not shielded within this cloud, and the electron gas generated does not represent a plasma in a single impact cascade triggered by an electron of energy. This is important as it justifies the independent-electron approximation used in the model. At the (average) spatial distribution of secondary electrons is anisotropic with the electron cloud elongated in the direction of the primary impact. The maximal radius of the cascade is about at this time. At the cascade has a maximal radius of and is already dominated by low-energy electrons These electrons do not contribute to ionization but exchange energies with the lattice. As the system cools, energy is distributed more equally, and the spatial distribution of the electron cloud becomes isotropic. At 90 fs, the maximal radius is about 150 Å. An analysis of the ionization fraction shows that the ionization level needed to create an Auger electron plasma in diamond will be reached with a dose of impact x-ray photons per if these photons arrive before the cascade electrons recombine. The Monte Carlo model described here could be adopted for the investigation of radiation damage in other insulators and has implications for planned experiments with intense femtosecond x-ray sources.- Open Access
Space-time evolution of electron cascades in diamond
Here we describe model calculations to follow the spatio-temporal evolution of secondary electron cascades in diamond. The band structure of the insulator has been explicitly incorporated into the calculations as it affects ionizations from the valence band. A Monte-Carlo model was constructed to describe the path of electrons following the impact of a single electron of energy E 250 eV. The results show the evolution of the secondary electron cascades in terms of the number of electrons liberated, the spatial distribution of these electrons, and the energy distribution among the electrons as a function of time. The predicted ionization rates (5-13 electrons in 100 fs) lie within the limits given by experiments and phenomenological models. Calculation of the local electron density and the corresponding Debye length shows that the latter is systematically larger than the radius of the electron cloud. This means that the electron gas generated does not represent a plasma in a single impact cascade triggered by an electron of E 250 eV energy. This is important as it justifies the independent-electron approximation used in the model. At 1 fs, the (average) spatial distribution of secondary electrons is anisotropic with the electron cloud elongated in the direction of the primary impact. The maximal radius of the cascade is about 50 A at this time. As the system cools, energy is distributed more equally, and the spatial distribution of the electron cloud becomes isotropic. At 90 fs maximal radius is about 150 A. The Monte-Carlo model described here could be adopted for the investigation of radiation damage in other insulators and has implications for planned experiments with intense femtosecond X-ray sources.
Open AccessSpace-time evolution of electron cascades in diamond
Here we describe model calculations to follow the spatio-temporal evolution of secondary electron cascades in diamond. The band structure of the insulator has been explicitly incorporated into the calculations as it affects ionizations from the valence band. A Monte-Carlo model was constructed to describe the path of electrons following the impact of a single electron of energy E 250 eV. The results show the evolution of the secondary electron cascades in terms of the number of electrons liberated, the spatial distribution of these electrons, and the energy distribution among the electrons as a function of time. The predicted ionization rates (5-13 electrons in 100 fs) lie within the limits given by experiments and phenomenological models. Calculation of the local electron density and the corresponding Debye length shows that the latter is systematically larger than the radius of the electron cloud. This means that the electron gas generated does not represent a plasma in a single impact cascade triggered by an electron of E 250 eV energy. This is important as it justifies the independent-electron approximation used in the model. At 1 fs, the (average) spatial distribution of secondary electrons is anisotropic with the electron cloud elongated in the direction of the primary impact. The maximal radius of the cascade is about 50 A at this time. As the system cools, energy is distributed more equally, and the spatial distribution of the electron cloud becomes isotropic. At 90 fs maximal radius is about 150 A. The Monte-Carlo model described here could be adopted for the investigation of radiation damage in other insulators and has implications for planned experiments with intense femtosecond X-ray sources.
- 28 December 2001
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4500, 63-75
Radiation-induced electron cascade in diamond and amorphous carbon
We have analyzed the evolution and the interaction dynamics of secondary cascade electrons generated by a single Auger electron in diamond and in amorphous carbon. The elastic mean free path was calculated as a function of impact energy, using the muffin-tin potential approximation, while the differential mean free path and the inelastic mean free path were estimated from two different optical models as a function of the impact energy. A Monte-Carlo model for describing the time evolution of the cascade was constructed, and numerical simulations were performed. The results show that the maximal average ionization rate caused by a single Auger electron corresponds to about $20$ to $40$ ionization events in a macroscopic sample. These electrons are liberated within 100 fs, following the Auger emission.- 28 December 2001
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4500, 63-75
Radiation-induced electron cascade in diamond and amorphous carbon
We have analyzed the evolution and the interaction dynamics of secondary cascade electrons generated by a single Auger electron in diamond and in amorphous carbon. The elastic mean free path was calculated as a function of impact energy, using the muffin-tin potential approximation, while the differential mean free path and the inelastic mean free path were estimated from two different optical models as a function of the impact energy. A Monte-Carlo model for describing the time evolution of the cascade was constructed, and numerical simulations were performed. The results show that the maximal average ionization rate caused by a single Auger electron corresponds to about $20$ to $40$ ionization events in a macroscopic sample. These electrons are liberated within 100 fs, following the Auger emission.- 12 November 2001
- Published by American Physical Society (APS) in Physical Review B
- Vol. 64 (21) , 214104
Auger-electron cascades in diamond and amorphous carbon
We have analyzed cascades of secondary electrons in diamond and amorphous carbon generated by the thermalization of a single Auger electron. The elastic electron mean free path was calculated as a function of impact energy in the muffin-tin potential approximation. The inelastic scattering cross section and the energy loss of electrons (expressed in terms of the differential inverse mean free path) were estimated from two “optical” models that utilize the measured dielectric constants of the materials. Using these data, a Monte Carlo model describing the time evolution of the cascade was constructed. The results show that at most around 20–40 secondary cascade electrons are released by a single Auger electron in a macroscopic sample of diamond or amorphous carbon. Consideration of the real band structure of diamond reduces this number further. The release of the cascade electrons happens within the first fs after the emission of the primary Auger electron. The results have implications to planned experiments with femtosecond x-ray sources.- 12 November 2001
- Published by American Physical Society (APS) in Physical Review B
- Vol. 64 (21) , 214104
Auger-electron cascades in diamond and amorphous carbon
We have analyzed cascades of secondary electrons in diamond and amorphous carbon generated by the thermalization of a single Auger electron. The elastic electron mean free path was calculated as a function of impact energy in the muffin-tin potential approximation. The inelastic scattering cross section and the energy loss of electrons (expressed in terms of the differential inverse mean free path) were estimated from two “optical” models that utilize the measured dielectric constants of the materials. Using these data, a Monte Carlo model describing the time evolution of the cascade was constructed. The results show that at most around 20–40 secondary cascade electrons are released by a single Auger electron in a macroscopic sample of diamond or amorphous carbon. Consideration of the real band structure of diamond reduces this number further. The release of the cascade electrons happens within the first fs after the emission of the primary Auger electron. The results have implications to planned experiments with femtosecond x-ray sources.- Open Access
Shake-up and shake-off excitations with associated electron losses in X-ray studies of proteins
Photoionisation of an atom by X-rays usually removes an inner-shell electron from the atom, leaving behind a perturbed "hollow ion" whose relaxation may take different routes. In light elements, emission of an Auger electron is common. However, the energy and the total number of electrons released from the atom may be modulated by shake-up and shake-off effects. When the inner-shell electron leaves, the outer-shell electrons may find themselves in a state that is not an eigen-state of the atom in its surroundings. The resulting collective excitation is called shake-up. If this process also involves the release of low energy electrons from the outer shell, then the process is called shake-off. It is not clear how significant shake-up and shake-off contributions are to the overall ionisation of biological materials like proteins. In particular, the interaction between the out-going electron and the remaining system depends on the chemical environment of the atom, which can be studied by quantum chemical methods. Here we present calculations on model compounds to represent the most common chemical environments in proteins. The results show that the shake-up and shake-off processes affect about 20% of all emissions from nitrogen, 30% from carbon, 40% from oxygen, and 23% from sulphur. Triple and higher ionisations are rare for carbon, nitrogen and oxygen, but are frequent for sulphur. The findings are relevant to the design of biological experiments at emerging X-ray free-electron lasers.
Open AccessShake-up and shake-off excitations with associated electron losses in X-ray studies of proteins
Photoionisation of an atom by X-rays usually removes an inner-shell electron from the atom, leaving behind a perturbed "hollow ion" whose relaxation may take different routes. In light elements, emission of an Auger electron is common. However, the energy and the total number of electrons released from the atom may be modulated by shake-up and shake-off effects. When the inner-shell electron leaves, the outer-shell electrons may find themselves in a state that is not an eigen-state of the atom in its surroundings. The resulting collective excitation is called shake-up. If this process also involves the release of low energy electrons from the outer shell, then the process is called shake-off. It is not clear how significant shake-up and shake-off contributions are to the overall ionisation of biological materials like proteins. In particular, the interaction between the out-going electron and the remaining system depends on the chemical environment of the atom, which can be studied by quantum chemical methods. Here we present calculations on model compounds to represent the most common chemical environments in proteins. The results show that the shake-up and shake-off processes affect about 20% of all emissions from nitrogen, 30% from carbon, 40% from oxygen, and 23% from sulphur. Triple and higher ionisations are rare for carbon, nitrogen and oxygen, but are frequent for sulphur. The findings are relevant to the design of biological experiments at emerging X-ray free-electron lasers.
- Open Access
Auger-electron cascades in diamond and amorphous carbon
We have analyzed the cascade of secondary electrons in diamond and amorphous carbon generated by the thermalisation of a single Auger electron. The elastic electron mean free path was calculated as a function of impact energy in the muffin-tin potential approximation. The inelastic scattering cross section and the energy loss of the electron (expressed in terms of differential inverse mean free path) were estimated from two "optical" models, that utilise the measured dielectric constants of the materials. Using these data, a Monte-Carlo model describing the time evolution of the cascade was constructed. The results show that at most around 20-40 secondary cascade electrons are released by a single Auger electron in a macroscopic sample of diamond or amorphous carbon. Consideration of the real band structure of diamond reduces this number further. The release of the cascade electrons happens within the first 100 femtoseconds after the emission of the primary Auger electron. The results have implications to planned experiments with femtosecond X-ray sources.
Open AccessAuger-electron cascades in diamond and amorphous carbon
We have analyzed the cascade of secondary electrons in diamond and amorphous carbon generated by the thermalisation of a single Auger electron. The elastic electron mean free path was calculated as a function of impact energy in the muffin-tin potential approximation. The inelastic scattering cross section and the energy loss of the electron (expressed in terms of differential inverse mean free path) were estimated from two "optical" models, that utilise the measured dielectric constants of the materials. Using these data, a Monte-Carlo model describing the time evolution of the cascade was constructed. The results show that at most around 20-40 secondary cascade electrons are released by a single Auger electron in a macroscopic sample of diamond or amorphous carbon. Consideration of the real band structure of diamond reduces this number further. The release of the cascade electrons happens within the first 100 femtoseconds after the emission of the primary Auger electron. The results have implications to planned experiments with femtosecond X-ray sources.
- 1 January 1999
- Published by AIP Publishing
Ultrafast structural studies on biological molecules by x-rays
Dramatic changes can be expected within the next few years in science that depends on synchrotron radiation today. An analysis of available data on short-pulse, high-intensity x-ray and electron sources indicate possibilities for imminent developments with x-ray free-electron lasers (driven primarily by the high energy physics community), and with table-top femtosecond x-ray sources based on laser-induced plasmas and wakefield acceleration. New sources could generate femtosecond x-ray pulses with as much as 12 orders of magnitude increase in peak brilliance and power over third-generation synchrotron storage rings. Such developments would create revolutionary new research opportunities in condensed matter physics, biology and medicine. Some of the possibilities are discussed here.
- 1 January 1999
- Published by AIP Publishing
Ultrafast structural studies on biological molecules by x-rays
Dramatic changes can be expected within the next few years in science that depends on synchrotron radiation today. An analysis of available data on short-pulse, high-intensity x-ray and electron sources indicate possibilities for imminent developments with x-ray free-electron lasers (driven primarily by the high energy physics community), and with table-top femtosecond x-ray sources based on laser-induced plasmas and wakefield acceleration. New sources could generate femtosecond x-ray pulses with as much as 12 orders of magnitude increase in peak brilliance and power over third-generation synchrotron storage rings. Such developments would create revolutionary new research opportunities in condensed matter physics, biology and medicine. Some of the possibilities are discussed here.