Gregory-George Zafiropoulos
Research Subjects
Gregory-George Zafiropoulos has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Giorgio Deli
Division of Periodontology, A. Gemelli Hospital, Catholic University, Rome, Italy
4 shared publications- Adrian Kasaj
Department of Periodontology and Operative Dentistry, University of Mainz, Mainz, Germany
3 shared publications Oliver Hoffmann
Department of Periodontics, University of Loma Linda, Loma Linda, Calif
3 shared publications- Oliver Hoffmann
Department of Periodontics, Loma Linda University, Loma Linda, Calif., USA
3 shared publications Jochen Rebbe
Herrmann Dental Studio, Duesseldorf, Germany
2 shared publicationsAristea Gortan-Kasaj
1 shared publication
Latest Publications
- 1 June 2013
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 39 (3) , 372-379
Implant Placement and Immediate Loading With Fixed Restorations in Augmented Sockets. Five-Year Results. A Case Report
In this report, a case is presented in which a patient received eight implants 10 months after tooth extraction and socket preservation. The implants were placed in both arches (maxilla = 4, mandible = 4) and immediately loaded using fixed partial restorations; they remained functional over 5 years. No changes in bleeding on probing or plaque index were observed; however, a 1.5-mm probing attachment level loss was observed during the first 3 years (mean: 0.25 mm/year) with no subsequent changes.
- 1 June 2013
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 39 (3) , 372-379
Implant Placement and Immediate Loading With Fixed Restorations in Augmented Sockets. Five-Year Results. A Case Report
In this report, a case is presented in which a patient received eight implants 10 months after tooth extraction and socket preservation. The implants were placed in both arches (maxilla = 4, mandible = 4) and immediately loaded using fixed partial restorations; they remained functional over 5 years. No changes in bleeding on probing or plaque index were observed; however, a 1.5-mm probing attachment level loss was observed during the first 3 years (mean: 0.25 mm/year) with no subsequent changes.
- 25 April 2012
- Published by Springer Nature in Der Diabetologe
- Vol. 8 (3) , 239-249
Parodontitis und Diabetes mellitus
- 25 April 2012
- Published by Springer Nature in Der Diabetologe
- Vol. 8 (3) , 239-249
Parodontitis und Diabetes mellitus
- 27 March 2012
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
A Method for Fabrication of Implant-Supported Fixed Partial Dentures
When restoring a partially edentulous arch with an implant-supported fixed partial denture, the optimal fit and function of the final restoration depend on the fabrication of an accurate impression and the registration of the interocclusal relationship. The present case report presents a method for the fabrication of impressions and the registration of the interocclusal relationship for implant-supported partial dentures. The described method allows the accurate transfer of the implant position and the registration of the interocclusal relationship using transfer key and electroformed gold copings. The key and copings were used to transfer the intraoral implant position to the cast, to position the abutments intraorally, and to facilitate the fabrication of the final partial denture.
- 27 March 2012
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
A Method for Fabrication of Implant-Supported Fixed Partial Dentures
When restoring a partially edentulous arch with an implant-supported fixed partial denture, the optimal fit and function of the final restoration depend on the fabrication of an accurate impression and the registration of the interocclusal relationship. The present case report presents a method for the fabrication of impressions and the registration of the interocclusal relationship for implant-supported partial dentures. The described method allows the accurate transfer of the implant position and the registration of the interocclusal relationship using transfer key and electroformed gold copings. The key and copings were used to transfer the intraoral implant position to the cast, to position the abutments intraorally, and to facilitate the fabrication of the final partial denture.
- 24 March 2012
- Vol. 27 (2) , 352-8
Osseointegration of zirconia implants with different surface characteristics: an evaluation in rabbits.
Zirconia ceramics are a viable alternative to titanium for use as dental implants. However, the smooth surface of zirconia means that longer healing periods are needed to accomplish osseointegration compared to roughened titanium surfaces. Surface modifications can be used to increase the roughness of zirconia. The aim of this study was to assess histologically and compare the degree of early bone apposition around zirconia dental implants with sandblasted, sintered, or laser-modified surfaces to that seen around surface-modified titanium implants. Removal torque was also measured and compared. Ninety-six implants--24 each of four types (sintered zirconia, laser-modified zirconia, sandblasted zirconia, and acid-etched titanium)--were placed in 48 New Zealand White female rabbits. One implant was inserted in each distal femur. Half of the specimens were harvested at 6 or 12 weeks and processed for light microscopic analysis; the area of bone-to-implant contact was measured morphometrically. The other half were evaluated for removal torque at 6 and 12 weeks. No statistically significant differences existed in bone apposition between the different surfaces at either time point. Differences in removal torque were significantly different between titanium and sandblasted zirconia and between sintered zirconia and sandblasted zirconia, with the first mentioned demonstrating a higher torque value at 6 weeks. At 12 weeks, the only significant difference in removal torque was between titanium and sandblasted zirconia, with titanium demonstrating the higher value. Comparable rates of bone apposition in the zirconia and titanium implant surfaces at 6 and 12 weeks of healing were observed. Removal torque values were similar for all implants with a roughened surface.
- 24 March 2012
- Vol. 27 (2) , 352-8
Osseointegration of zirconia implants with different surface characteristics: an evaluation in rabbits.
Zirconia ceramics are a viable alternative to titanium for use as dental implants. However, the smooth surface of zirconia means that longer healing periods are needed to accomplish osseointegration compared to roughened titanium surfaces. Surface modifications can be used to increase the roughness of zirconia. The aim of this study was to assess histologically and compare the degree of early bone apposition around zirconia dental implants with sandblasted, sintered, or laser-modified surfaces to that seen around surface-modified titanium implants. Removal torque was also measured and compared. Ninety-six implants--24 each of four types (sintered zirconia, laser-modified zirconia, sandblasted zirconia, and acid-etched titanium)--were placed in 48 New Zealand White female rabbits. One implant was inserted in each distal femur. Half of the specimens were harvested at 6 or 12 weeks and processed for light microscopic analysis; the area of bone-to-implant contact was measured morphometrically. The other half were evaluated for removal torque at 6 and 12 weeks. No statistically significant differences existed in bone apposition between the different surfaces at either time point. Differences in removal torque were significantly different between titanium and sandblasted zirconia and between sintered zirconia and sandblasted zirconia, with the first mentioned demonstrating a higher torque value at 6 weeks. At 12 weeks, the only significant difference in removal torque was between titanium and sandblasted zirconia, with titanium demonstrating the higher value. Comparable rates of bone apposition in the zirconia and titanium implant surfaces at 6 and 12 weeks of healing were observed. Removal torque values were similar for all implants with a roughened surface.
- 1 April 2011
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 37 (sp1) , 141-155
Maintenance of Class III Trifurcated Molars Versus Implant Placement in Regenerated Extraction Sockets: Long-Term Results of 2 Cases
Studies to date have reached differing conclusions regarding the long-term prognosis of teeth with class III furcation involvement. Replacement of such teeth with implants could be an alternative. This report compares the treatment outcomes of 2 cases with similar disease progression: 1 treated by implant therapy and 1 maintained with nonsurgical periodontal treatment. Two patients with advanced chronic periodontitis and class III furcation involvement of all molars were treated. Case 1 received a conservative periodontal and antibiotic treatment, followed by 15 years of maintenance. In case 2, the molars were extracted and replaced with implants, and the implants were observed for 7 years. Clinical attachment level (CAL), probing attachment level (PAL), bleeding on probing, plaque index, and periodontal pathogens were recorded. Despite good compliance of case 1, periodontal pathogens were not eliminated and tissue destruction was not halted. The PAL outcomes of case 2 improved over time; mean PAL loss reached 0.35 mm/y in the first 3 years and then decreased to 0.01 mm/y. While CAL outcomes did not change in case 2, case 1 showed increased CAL loss after 8 years. Based on the limited findings of this case report, extraction of molars with class III furcation involvement and subsequent implant placement may render a better predictability of treatment outcomes than nonsurgical periodontal therapy in the cases of infection with periodontal pathogens.
- 1 April 2011
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 37 (sp1) , 141-155
Maintenance of Class III Trifurcated Molars Versus Implant Placement in Regenerated Extraction Sockets: Long-Term Results of 2 Cases
Studies to date have reached differing conclusions regarding the long-term prognosis of teeth with class III furcation involvement. Replacement of such teeth with implants could be an alternative. This report compares the treatment outcomes of 2 cases with similar disease progression: 1 treated by implant therapy and 1 maintained with nonsurgical periodontal treatment. Two patients with advanced chronic periodontitis and class III furcation involvement of all molars were treated. Case 1 received a conservative periodontal and antibiotic treatment, followed by 15 years of maintenance. In case 2, the molars were extracted and replaced with implants, and the implants were observed for 7 years. Clinical attachment level (CAL), probing attachment level (PAL), bleeding on probing, plaque index, and periodontal pathogens were recorded. Despite good compliance of case 1, periodontal pathogens were not eliminated and tissue destruction was not halted. The PAL outcomes of case 2 improved over time; mean PAL loss reached 0.35 mm/y in the first 3 years and then decreased to 0.01 mm/y. While CAL outcomes did not change in case 2, case 1 showed increased CAL loss after 8 years. Based on the limited findings of this case report, extraction of molars with class III furcation involvement and subsequent implant placement may render a better predictability of treatment outcomes than nonsurgical periodontal therapy in the cases of infection with periodontal pathogens.
- 1 December 2010
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 36 (6) , 455-465
Zirconia Removable Telescopic Dentures Retained on Teeth or Implants for Maxilla Rehabilitation. Three-Year Observation of Three Cases
This report addresses maxillary restoration with removable telescopic crown-retained palatal free dentures. One patient with 7 natural teeth (PERIO), a second patient with 6 dental implants (IMPL), and a third patient with 2 natural teeth and 4 dental implants (IMPL-PERIO) were treated. Zirconia copings for natural teeth and individual zirconia implant abutments were fabricated in CAD/CAM and used as primary crowns. Electroformed gold copings were used as secondary telescopes. All maxilla supraconstructions were fabricated with zirconia and CAD/CAM. Patients were monitored during a 3-year period; all teeth and implants survived, and no biological or mechanical complications occurred. The peri-implant and periodontal conditions were healthy. While recognizing the limitations of this report, results showed that fabricating removable zirconia structures by means of CAD/CAM can yield highly functional and esthetic results. Galvanoforming technology is the preferable means of fabricating secondary crowns. The combination of these techniques and materials results in a prosthetic reconstruction of high quality, good fit, and biocompatibility. Long-term studies of large populations are necessary to investigate the clinical properties of the material utilized in this type of construction.
- 1 December 2010
- Published by American Academy of Implant Dentistry in Journal of Oral Implantology
- Vol. 36 (6) , 455-465
Zirconia Removable Telescopic Dentures Retained on Teeth or Implants for Maxilla Rehabilitation. Three-Year Observation of Three Cases
This report addresses maxillary restoration with removable telescopic crown-retained palatal free dentures. One patient with 7 natural teeth (PERIO), a second patient with 6 dental implants (IMPL), and a third patient with 2 natural teeth and 4 dental implants (IMPL-PERIO) were treated. Zirconia copings for natural teeth and individual zirconia implant abutments were fabricated in CAD/CAM and used as primary crowns. Electroformed gold copings were used as secondary telescopes. All maxilla supraconstructions were fabricated with zirconia and CAD/CAM. Patients were monitored during a 3-year period; all teeth and implants survived, and no biological or mechanical complications occurred. The peri-implant and periodontal conditions were healthy. While recognizing the limitations of this report, results showed that fabricating removable zirconia structures by means of CAD/CAM can yield highly functional and esthetic results. Galvanoforming technology is the preferable means of fabricating secondary crowns. The combination of these techniques and materials results in a prosthetic reconstruction of high quality, good fit, and biocompatibility. Long-term studies of large populations are necessary to investigate the clinical properties of the material utilized in this type of construction.
- 1 October 2010
- Vol. 12 (4) , 112-22
Maintenance after a complex orthoperio treatment in a case of generalized aggressive periodontitis: 7-year result.
Generalized aggressive periodontitis (GAgP) encompasses a distinct type of periodontal disease exhibiting much more rapid periodontal tissue destruction than chronic periodontitis. The best method for management of GAgP may include the use of both regenerative periodontal techniques and the administration of systemic antibiotics. The treatment of a case of GAgP over a period of 6.7 years is presented in this case report. Initial periodontal therapy (week 1- 32) consisted of supragingival plaque control and three appointments of scaling and root planing. Based on the periodontal pathogens isolated (5 species), the patient also received metronidazole plus amoxicillin for one week, followed 10 weeks later by metronidazole plus amoxicillin/clavulanate for one week. The patient was put on regular supportive periodontal therapy (SPT) thereafter. Orthodontic treatment was performed after completion of the initial therapy for 96 weeks. Measurements of clinical attachment level, bleeding on probing and plaque index were obtained at every examination. Antimicrobial and mechanical treatment resulted in eradication of all periopathogens and significantly improved all clinical parameters. During orthodontic treatment and active maintenance, there was no relapse of GAgP. The patient participated in SPT for 194 weeks and thereafter decided to discontinue SPT. Twenty-four months later a relapse of GAgP was diagnosed and all teeth had to be extracted. These results indicate that a combined mechanical and antimicrobial treatment approach can lead to consistent resolution of GAgP. Further studies including a larger number of cases are warranted to validate these findings.
- 1 October 2010
- Vol. 12 (4) , 112-22
Maintenance after a complex orthoperio treatment in a case of generalized aggressive periodontitis: 7-year result.
Generalized aggressive periodontitis (GAgP) encompasses a distinct type of periodontal disease exhibiting much more rapid periodontal tissue destruction than chronic periodontitis. The best method for management of GAgP may include the use of both regenerative periodontal techniques and the administration of systemic antibiotics. The treatment of a case of GAgP over a period of 6.7 years is presented in this case report. Initial periodontal therapy (week 1- 32) consisted of supragingival plaque control and three appointments of scaling and root planing. Based on the periodontal pathogens isolated (5 species), the patient also received metronidazole plus amoxicillin for one week, followed 10 weeks later by metronidazole plus amoxicillin/clavulanate for one week. The patient was put on regular supportive periodontal therapy (SPT) thereafter. Orthodontic treatment was performed after completion of the initial therapy for 96 weeks. Measurements of clinical attachment level, bleeding on probing and plaque index were obtained at every examination. Antimicrobial and mechanical treatment resulted in eradication of all periopathogens and significantly improved all clinical parameters. During orthodontic treatment and active maintenance, there was no relapse of GAgP. The patient participated in SPT for 194 weeks and thereafter decided to discontinue SPT. Twenty-four months later a relapse of GAgP was diagnosed and all teeth had to be extracted. These results indicate that a combined mechanical and antimicrobial treatment approach can lead to consistent resolution of GAgP. Further studies including a larger number of cases are warranted to validate these findings.
- 2 July 2010
- Vol. 58 (4) , e149-55
Comprehensive treatment in a case with advanced chronic periodontitis: a 15-year follow-up.
This case report describes the comprehensive treatment of generalized, advanced periodontal disease and full-mouth rehabilitation in an adult patient. Given the extensive periodontal tissue destruction, a systematic approach was needed to determine restoration possibilities and patient expectations. Subsequent oral rehabilitation was accomplished with fixed dentures in the mandible and a removable denture in the maxilla. In the maxilla, strategically important anchor teeth were replaced with implants and a palate-free horseshoe-shaped removable denture was fabricated, using telescopic crowns as abutments. This case indicates that long-term post-treatment periodontal stability can be ensured only by full patient cooperation and consistent periodontal maintenance.
- 2 July 2010
- Vol. 58 (4) , e149-55
Comprehensive treatment in a case with advanced chronic periodontitis: a 15-year follow-up.
This case report describes the comprehensive treatment of generalized, advanced periodontal disease and full-mouth rehabilitation in an adult patient. Given the extensive periodontal tissue destruction, a systematic approach was needed to determine restoration possibilities and patient expectations. Subsequent oral rehabilitation was accomplished with fixed dentures in the mandible and a removable denture in the maxilla. In the maxilla, strategically important anchor teeth were replaced with implants and a palate-free horseshoe-shaped removable denture was fabricated, using telescopic crowns as abutments. This case indicates that long-term post-treatment periodontal stability can be ensured only by full patient cooperation and consistent periodontal maintenance.
- 1 September 2007
- Vol. 61 (4) , 369-74
[The relationship of periodontitis and diabetes mellitus].
Periodontitis is a chronic, dental-plaque induced inflammatory disease of the tooth-supporting tissues, resulting in a gradual loss of connective tissue attachment and alveolar bone. The interrelationship between diabetes mellitus and periodontitis has been studied for many years. At,present, there is strong evidence to suggest that the incidence and severity of periodontitis is influenced by the presence or absence of diabetes mellitus as well as by the degree of diabetes control by patients. Elevated blood glucose levels in poorly controlled diabetics result in an increase of protein glycosylation leading to amplified formation of so-called Advanced Glycation End products (AGE). AGEs are glucose products that have the ability to attract and stimulate inflammatory cells to produce inflammatory cytokines, elevating the risk of periodontal attachment and/or alveolar bone loss. Gram-negative periodontal infection significantly decreases glucose tolerance and can lead, like other types of inflammation, to an increase in the severity of diabetes. Thus, diabetes and periodontal disease form a system in which periodontitis is aggravated and metabolic control of blood glucose levels becomes more difficult. This in turn leads to mutual aggravation that results in a self-enforcing catabolic process, a vicious circle of inflammation, tissue destruction and insulin resistance.
- 1 September 2007
- Vol. 61 (4) , 369-74
[The relationship of periodontitis and diabetes mellitus].
Periodontitis is a chronic, dental-plaque induced inflammatory disease of the tooth-supporting tissues, resulting in a gradual loss of connective tissue attachment and alveolar bone. The interrelationship between diabetes mellitus and periodontitis has been studied for many years. At,present, there is strong evidence to suggest that the incidence and severity of periodontitis is influenced by the presence or absence of diabetes mellitus as well as by the degree of diabetes control by patients. Elevated blood glucose levels in poorly controlled diabetics result in an increase of protein glycosylation leading to amplified formation of so-called Advanced Glycation End products (AGE). AGEs are glucose products that have the ability to attract and stimulate inflammatory cells to produce inflammatory cytokines, elevating the risk of periodontal attachment and/or alveolar bone loss. Gram-negative periodontal infection significantly decreases glucose tolerance and can lead, like other types of inflammation, to an increase in the severity of diabetes. Thus, diabetes and periodontal disease form a system in which periodontitis is aggravated and metabolic control of blood glucose levels becomes more difficult. This in turn leads to mutual aggravation that results in a self-enforcing catabolic process, a vicious circle of inflammation, tissue destruction and insulin resistance.