Tokuji Okada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tokuji Okada has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Toshimi Shimizu
Niigata Univ
10 shared publications - Abeer Mahmoud Mahmoud
Computer Science Department, Faculty of Computer and Information Science, Ain Shams University, Cairo 11566, Egypt
3 shared publications Naoki Hasegawa
3 shared publicationsToshimi Shimizu
Information Science and Engineering, Graduate School of Science and Technology, Niigata University, Niigata 950-2181, Japan
2 shared publicationsWagner Tanaka Botelho
Information Science and Engineering, Graduate School of Science and Technology, Niigata University, Niigata 950-2181, Japan
2 shared publicationsAkira Iguchi
Niigata Univ
1 shared publication
Latest Publications
- 6 May 2011
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 30 (1) , 123-132
Trajectory estimation of a skid-steering mobile robot propelled by independently driven wheels
SUMMARY: This paper analyses a mobile robot with independently rotating wheels travelling on uneven but smooth ground, including ascending or descending surfaces. We formulate a mathematical expression for the energy cost of the robot's movement. For our analysis, we utilise the principle of virtual work and assume that the robot moves with a fixed arrangement of wheel axes and without using a steering handle. The mathematical model reveals that the coefficient of friction and the payload distribution dominate the wheel behaviour, including slipping and skidding. We minimise the virtual work expression to determine the robot's motion complying with driven wheels. The model also enables us to estimate trajectories for different ground conditions. A hybrid robot, PEOPLER-II, is used to demonstrate the predicted motions, including turns and spins, by following angular velocity control rules. Experimental data verifies that the proposed formulation and minimisation of virtual work are valid techniques for predicting a robot's trajectory. The method described is widely applicable to wheeled robots having independently driven wheels.
- 6 May 2011
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 30 (1) , 123-132
Trajectory estimation of a skid-steering mobile robot propelled by independently driven wheels
SUMMARY: This paper analyses a mobile robot with independently rotating wheels travelling on uneven but smooth ground, including ascending or descending surfaces. We formulate a mathematical expression for the energy cost of the robot's movement. For our analysis, we utilise the principle of virtual work and assume that the robot moves with a fixed arrangement of wheel axes and without using a steering handle. The mathematical model reveals that the coefficient of friction and the payload distribution dominate the wheel behaviour, including slipping and skidding. We minimise the virtual work expression to determine the robot's motion complying with driven wheels. The model also enables us to estimate trajectories for different ground conditions. A hybrid robot, PEOPLER-II, is used to demonstrate the predicted motions, including turns and spins, by following angular velocity control rules. Experimental data verifies that the proposed formulation and minimisation of virtual work are valid techniques for predicting a robot's trajectory. The method described is widely applicable to wheeled robots having independently driven wheels.
- Open Access
- 1 February 2011
- Published by FapUNIFESP (SciELO) in Sba: Controle & Automação Sociedade Brasileira de Automatica
- Vol. 22 (1) , 9-22
Software and Hardware control of a hybrid robot for switching between leg-type and wheel-type modes
One of the objectives of the paper is to describe the hybrid robot PEOPLER-II (Perpendicularly Oriented Planetary Legged Robot) with regard to switching between leg-type and wheel-type. Our robot has an easier design and control system than other hybrid robots. The software and hardware control in the process of performing five robot tasks are considered. These are the walking, rolling, switching, turning and spinning. In the switching task, we show the control method based on minimization of total energycost. Also, the hardware components and their interconnections are described. The graphical user interfaces utilized in the simulation and experiment are demonstrated. The walking, rolling and the switching without reverse rotation and arm motion are verified in simulation and with real robot, in addition to turning and spinning.
- 1 February 2011
- Published by FapUNIFESP (SciELO) in Sba: Controle & Automação Sociedade Brasileira de Automatica
- Vol. 22 (1) , 9-22
Open AccessSoftware and Hardware control of a hybrid robot for switching between leg-type and wheel-type modes
One of the objectives of the paper is to describe the hybrid robot PEOPLER-II (Perpendicularly Oriented Planetary Legged Robot) with regard to switching between leg-type and wheel-type. Our robot has an easier design and control system than other hybrid robots. The software and hardware control in the process of performing five robot tasks are considered. These are the walking, rolling, switching, turning and spinning. In the switching task, we show the control method based on minimization of total energycost. Also, the hardware components and their interconnections are described. The graphical user interfaces utilized in the simulation and experiment are demonstrated. The walking, rolling and the switching without reverse rotation and arm motion are verified in simulation and with real robot, in addition to turning and spinning.
- 13 October 2009
- Published by SAGE Publications in The International Journal of Robotics Research
- Vol. 29 (9) , 1199-1221
Motion Analysis with Experimental Verification of the Hybrid Robot PEOPLER-II for Reversible Switch between Walk and Roll on Demand
We propose a newly renovated mobile robot PEOPLER-II (Perpendicularly Oriented Planetary Legged Robot), and addresses its motion analysis for switching its locomotion from leg-type to wheel-type and vice versa. For the leg-type locomotion, particularly in a transitional state of sitting or standing, we propose a control method based on minimization of the total energy cost using the distribution of the motor power payload in the hip and knee joints, in addition to the method of keeping the same payload factor. Also, we discuss robot configurations for switching between the two locomotion types by considering environmental factors such as walking gaits, ground inclination angle and robot’s traveling direction. Knee joint position of a pivotal foot determines knee ahead and knee behind gaits. In each switch, we check such characteristics as the hip joint rotation direction, robot center trajectory, and necessary total power in a practical point of use. Then we build three beneficial switching cycles aiming for moderate use of a motor, rider’s comfort, and power saving. Finally, we demonstrate the switching by considering the aim and verify that the results of the analysis become useful for enabling switching on demand.
- 13 October 2009
- Published by SAGE Publications in The International Journal of Robotics Research
- Vol. 29 (9) , 1199-1221
Motion Analysis with Experimental Verification of the Hybrid Robot PEOPLER-II for Reversible Switch between Walk and Roll on Demand
We propose a newly renovated mobile robot PEOPLER-II (Perpendicularly Oriented Planetary Legged Robot), and addresses its motion analysis for switching its locomotion from leg-type to wheel-type and vice versa. For the leg-type locomotion, particularly in a transitional state of sitting or standing, we propose a control method based on minimization of the total energy cost using the distribution of the motor power payload in the hip and knee joints, in addition to the method of keeping the same payload factor. Also, we discuss robot configurations for switching between the two locomotion types by considering environmental factors such as walking gaits, ground inclination angle and robot’s traveling direction. Knee joint position of a pivotal foot determines knee ahead and knee behind gaits. In each switch, we check such characteristics as the hip joint rotation direction, robot center trajectory, and necessary total power in a practical point of use. Then we build three beneficial switching cycles aiming for moderate use of a motor, rider’s comfort, and power saving. Finally, we demonstrate the switching by considering the aim and verify that the results of the analysis become useful for enabling switching on demand.
- 1 January 2009
- Published by Japan Society of Mechanical Engineers in The Proceedings of Conference of Hokuriku-Shinetsu Branch
- Vol. 2009.46, 261-262
707 Extended Kalman Filtering for a magnetically levitated flexible beam
- 1 January 2009
- Published by Japan Society of Mechanical Engineers in The Proceedings of Conference of Hokuriku-Shinetsu Branch
- Vol. 2009.46, 261-262
707 Extended Kalman Filtering for a magnetically levitated flexible beam
- 1 January 2009
- Published by Japan Society of Mechanical Engineers in The Proceedings of Conference of Hokuriku-Shinetsu Branch
- Vol. 2009.46, 453-454
1205 Relation between muscle inputs and joint torques of a robot arm with antagonist bi-articular muscles.
- 1 January 2009
- Published by Japan Society of Mechanical Engineers in The Proceedings of Conference of Hokuriku-Shinetsu Branch
- Vol. 2009.46, 453-454
1205 Relation between muscle inputs and joint torques of a robot arm with antagonist bi-articular muscles.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2008, _2P1-C10_1
2P1-C10 Circular Path Estimation of a Rotating Four-Legged Robot Using a Hybrid Genetic Algorithm LSM
There exists an interest for a new type of vehicle which inherits both advantages of wheeled and legged locomotion. Control of such robots is not a trivial problem since we must find algorithms and strategies for utilizing the type and exhibiting complex interactions with environment. This paper presents the step toward developing a C++ object oriented based simulator for a rotating four-legged mobile robot called PEOPLER which can behave as a four wheeled or four legged robot on demand. We propose a new hybrid method for estimating circular radius of the legged locomotion path on a flat terrain. We call the hybrid estimation method GALSM as an expression of combining genetic algorithm (GA) and the well known least square method (LSM). Results of the estimation showed that the GALSM is promising in steering of the robot.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2008, _2P1-C10_1
2P1-C10 Circular Path Estimation of a Rotating Four-Legged Robot Using a Hybrid Genetic Algorithm LSM
There exists an interest for a new type of vehicle which inherits both advantages of wheeled and legged locomotion. Control of such robots is not a trivial problem since we must find algorithms and strategies for utilizing the type and exhibiting complex interactions with environment. This paper presents the step toward developing a C++ object oriented based simulator for a rotating four-legged mobile robot called PEOPLER which can behave as a four wheeled or four legged robot on demand. We propose a new hybrid method for estimating circular radius of the legged locomotion path on a flat terrain. We call the hybrid estimation method GALSM as an expression of combining genetic algorithm (GA) and the well known least square method (LSM). Results of the estimation showed that the GALSM is promising in steering of the robot.
- 1 January 2008
- Published by The Society of Instrument and Control Engineers in Transactions of the Society of Instrument and Control Engineers
- Vol. 44 (5) , 389-395
Tip Position Control of a Two Link Flexible Manipulator Based on the Dynamic Extension Technique
- 1 January 2008
- Published by The Society of Instrument and Control Engineers in Transactions of the Society of Instrument and Control Engineers
- Vol. 44 (5) , 389-395
Tip Position Control of a Two Link Flexible Manipulator Based on the Dynamic Extension Technique
- 1 January 2007
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2007, _2A2-E10_1
2A2-E10 Force Transmission Mechanism for Steering a Walker with High Performance by a Single Hand Operation
To make it easy for maneuvering a walker toward the direction of destination, we propose a joystick which is operated by a user's hand without asking electric power and instruments. It is basically composed of a differential gear mechanism. However, it assembles irregular gears for satisfying the Ackermann-geometry so that the walker can turn easily by hand operation. We show the design of force transmission mechanism using the irregular gear made up by two different plain gears in size. Also, we show how the mechanism works since a walker steering is an oscillatory motion operation.
- 1 January 2007
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2007, _2A2-E10_1
2A2-E10 Force Transmission Mechanism for Steering a Walker with High Performance by a Single Hand Operation
To make it easy for maneuvering a walker toward the direction of destination, we propose a joystick which is operated by a user's hand without asking electric power and instruments. It is basically composed of a differential gear mechanism. However, it assembles irregular gears for satisfying the Ackermann-geometry so that the walker can turn easily by hand operation. We show the design of force transmission mechanism using the irregular gear made up by two different plain gears in size. Also, we show how the mechanism works since a walker steering is an oscillatory motion operation.
- 1 January 2006
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2006, _2P2-E28_1
2P2-E28 Steering and braking for simplifying manual operation of a 4-wheeled vehicle
To make use of the manually controllable smart mechanism for changing locomotion modes of a 4-wheeled vehicle, we investigate brake force as a function of steer angles of four wheels. This mechanism is applicable to walkers for self-walking rehabilitation, micro cars carrying only one person for moving without human assistance, and four wheeled vehicle like scooters, in general. We fabricated a wagon which can support its load equally at each of four wheels and give brake force by biasing wheel direction from wagon's front direction. We show mathematical equation for estimating relation between the brake force and manually settled steer angles. Experimental results make it clear that the equation is good for producing a given amount of brake force. In the last, we show angular transmission mechanism assembled in outer shafts of a differential gear mechanism for locomotion satisfying Ackermann-geometry.
- 1 January 2006
- Published by Japan Society of Mechanical Engineers in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
- Vol. 2006, _2P2-E28_1
2P2-E28 Steering and braking for simplifying manual operation of a 4-wheeled vehicle
To make use of the manually controllable smart mechanism for changing locomotion modes of a 4-wheeled vehicle, we investigate brake force as a function of steer angles of four wheels. This mechanism is applicable to walkers for self-walking rehabilitation, micro cars carrying only one person for moving without human assistance, and four wheeled vehicle like scooters, in general. We fabricated a wagon which can support its load equally at each of four wheels and give brake force by biasing wheel direction from wagon's front direction. We show mathematical equation for estimating relation between the brake force and manually settled steer angles. Experimental results make it clear that the equation is good for producing a given amount of brake force. In the last, we show angular transmission mechanism assembled in outer shafts of a differential gear mechanism for locomotion satisfying Ackermann-geometry.