Julie Q. Shang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Julie Q. Shang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Joon Kyu Lee
Yonsei University
2 shared publications - A. Rittirong
Deep Sea Asia Ltd 15th Floor, SCB Park Plaza, West Tower II, 18 Ratchadapisek Road, Jatujak, Bangkok, Thailand, 10900 Telephone: , Telefax:
1 shared publication - Amnart Rittirong
Ph.D. Student, Dept. of Civil and Environmental Engineering, Univ. of Western Ontario, 1151 Richmond St., London, Ontario, Canada N6A 5B9
1 shared publication - Cheng Zhao
DST Consulting Engineers, 203-2150 Thurston Drive, Ottawa, ON, Canada K1G 5TG
1 shared publication D.G. Buckland
1 shared publication- E. C. Lee
Emas Kiara Marketing Sdn. Bhd. Lot 13A, Jalan RP3, Rawang Industrial Estate, 48000 Rawang, Selangor Darul Ehsan, Malaysia Telephone: , Telefax:
1 shared publication
Latest Publications
- Open Access
- 23 July 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 167 (1) , 012024
Monitoring Lead in Soil Water System Using Complex Permittivity
The complex permittivity was investigated to detect lead contamination in soil. The system used consists of an Automatic Network Analyzer (ANA), a sample holder, coaxial cables and a personal computer for data processing. Five samples of Halton Till soil were prepared and mixed with five different concentrations of hybrid blends of lead salts (PbSO4, PbCl2 and Pb(NO3)2). The objective was to investigate the capability of complex permittivity to detect lead, when introduced to the soil in hybrid blend salts. Chemical analysis was conducted on the pore water of the six soil samples to investigate lead transport and the potential risk of lead in groundwater sources. The results show that the complex permittivity is sensitive to the change in lead concentration in soil as the real part decreases and the imaginary part increases with the increase of lead concentration. The real part decreased from 23 to 17 when the concentration of the lead increased from 0 to 1800 ppm. The imaginary part increased from 16 to 24 as the lead concentration in soil increased from 0 to 1800 ppm. The chemical analysis of the pore water showed that the electrolytes increased as lead concentrations increased in soil. The results displayed that the complex permittivity could be used as a nondestructive tool to monitor lead contamination in soil.
- 23 July 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 167 (1) , 012024
Open AccessMonitoring Lead in Soil Water System Using Complex Permittivity
The complex permittivity was investigated to detect lead contamination in soil. The system used consists of an Automatic Network Analyzer (ANA), a sample holder, coaxial cables and a personal computer for data processing. Five samples of Halton Till soil were prepared and mixed with five different concentrations of hybrid blends of lead salts (PbSO4, PbCl2 and Pb(NO3)2). The objective was to investigate the capability of complex permittivity to detect lead, when introduced to the soil in hybrid blend salts. Chemical analysis was conducted on the pore water of the six soil samples to investigate lead transport and the potential risk of lead in groundwater sources. The results show that the complex permittivity is sensitive to the change in lead concentration in soil as the real part decreases and the imaginary part increases with the increase of lead concentration. The real part decreased from 23 to 17 when the concentration of the lead increased from 0 to 1800 ppm. The imaginary part increased from 16 to 24 as the lead concentration in soil increased from 0 to 1800 ppm. The chemical analysis of the pore water showed that the electrolytes increased as lead concentrations increased in soil. The results displayed that the complex permittivity could be used as a nondestructive tool to monitor lead contamination in soil.
- Open Access
Micropore Structure of Cement-Stabilized Gold Mine Tailings
Mine tailings have often to be stabilized by mixing them with cementing agents. In this study, the pore structure of gold tailings stabilized with Portland cement was evaluated by means of mercury intrusion porosimetry. The investigation was conducted on samples prepared with different fractions of tailings and cement as well as on samples activated with elevated temperature curing and chemical (CaCl2) addition. It was observed that all mixed samples exhibit a mono-modal pore size distribution, indicating that the cement-stabilized tailings are characterized by a single-porosity structure. The results also showed that the higher fraction of tailings and cement leads to a dense and finer pore structure. The total porosity of mixture samples decreases with increasing curing temperature and CaCl2 concentration due to the acceleration of hydration reaction.
Open AccessMicropore Structure of Cement-Stabilized Gold Mine Tailings
Mine tailings have often to be stabilized by mixing them with cementing agents. In this study, the pore structure of gold tailings stabilized with Portland cement was evaluated by means of mercury intrusion porosimetry. The investigation was conducted on samples prepared with different fractions of tailings and cement as well as on samples activated with elevated temperature curing and chemical (CaCl2) addition. It was observed that all mixed samples exhibit a mono-modal pore size distribution, indicating that the cement-stabilized tailings are characterized by a single-porosity structure. The results also showed that the higher fraction of tailings and cement leads to a dense and finer pore structure. The total porosity of mixture samples decreases with increasing curing temperature and CaCl2 concentration due to the acceleration of hydration reaction.
- 21 July 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 1-8
Application of Coal Fly Ash to Replace Lime in the Management of Reactive Mine Tailings
Acid mine drainage (AMD), the acidic water discharged from active, inactive, or abandoned mine sites, is the largest environmental liability facing the mining industry. Currently large quantities of lime are used for AMD control by mining companies. The manufacture of lime contributes significantly to greenhouse gas (GHG) emissions, since about 0.8 tonnes of CO2 are generated for every tonne of lime produced. This study presents an innovative approach of using coal fly ash, a by-product from coal-fired utilities, to replace lime for AMD control in reactive mine tailings. A case study is presented to demonstrate that at on mining sites with access to high calcium coal fly ash, this approach is effective, cost efficient and presents minimum adverse environmental impacts.
- 21 July 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 1-8
Application of Coal Fly Ash to Replace Lime in the Management of Reactive Mine Tailings
Acid mine drainage (AMD), the acidic water discharged from active, inactive, or abandoned mine sites, is the largest environmental liability facing the mining industry. Currently large quantities of lime are used for AMD control by mining companies. The manufacture of lime contributes significantly to greenhouse gas (GHG) emissions, since about 0.8 tonnes of CO2 are generated for every tonne of lime produced. This study presents an innovative approach of using coal fly ash, a by-product from coal-fired utilities, to replace lime for AMD control in reactive mine tailings. A case study is presented to demonstrate that at on mining sites with access to high calcium coal fly ash, this approach is effective, cost efficient and presents minimum adverse environmental impacts.
- 1 July 2014
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 276, 323-331
Thermo-mechanical properties and microfabric of fly ash-stabilized gold tailings
- 1 July 2014
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 276, 323-331
Thermo-mechanical properties and microfabric of fly ash-stabilized gold tailings
- 1 March 2014
- Published by Elsevier in Journal of Environmental Management
- Vol. 135, 73-80
In-situ study of beneficial utilization of coal fly ash in reactive mine tailings
- 1 March 2014
- Published by Elsevier in Journal of Environmental Management
- Vol. 135, 73-80
In-situ study of beneficial utilization of coal fly ash in reactive mine tailings
- 9 October 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 205-212
Soil Cementation Generated and Enhanced by Electrokinetics
Electrokinetics has been applied in geotechnical engineering, specifically in soil improvement, for nearly a century. Most engineering applications and research projects have focused on electro-osmotic consolidation generated by the negative pore water pressure, as well as settling of suspended soil solids due to electrophoresis. Although many studies have reported that significant cementation bonds have developed in soils after electrokinetic treatment, a systematic study on the subject (i.e. the mechanism and observations from field and lab experiments) has not been reported. In this review, the cementation developed in marine sediments and offshore calcareous sands is presented along with discussion of the principles of electrokinetic cementation. The study is of particular importance in earthquake engineering for development of soil improvement technologies against seismic loading, because electrokinetics generated cementation of soils may significantly reduce the risk of soil liquefaction.
- 9 October 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 205-212
Soil Cementation Generated and Enhanced by Electrokinetics
Electrokinetics has been applied in geotechnical engineering, specifically in soil improvement, for nearly a century. Most engineering applications and research projects have focused on electro-osmotic consolidation generated by the negative pore water pressure, as well as settling of suspended soil solids due to electrophoresis. Although many studies have reported that significant cementation bonds have developed in soils after electrokinetic treatment, a systematic study on the subject (i.e. the mechanism and observations from field and lab experiments) has not been reported. In this review, the cementation developed in marine sediments and offshore calcareous sands is presented along with discussion of the principles of electrokinetic cementation. The study is of particular importance in earthquake engineering for development of soil improvement technologies against seismic loading, because electrokinetics generated cementation of soils may significantly reduce the risk of soil liquefaction.
- 16 May 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 1-8
Electrokinetics: Engineering Applications and Recent Development
Electrokinetics (EK) is the general term used to describe responses of soil water systems to the application of an external electric field, which includes three predominant components, i.e. electro-osmosis, electrophoresis and electrochemical reactions. Electro-osmosis generates water flow in soil mass, electrophoresis induces movement of soil solids and electrochemical reactions lead to emission of oxygen and hydrogen gases, corrosion of anodes, and pH gradients in soil. Although electrokinetics has been studied over more than a century, the recent advances of anode technology have made electrokinetics a viable tool in geo-engineering. The applications of electrokinetics in geotechnical engineering and recent development of electrical vertical drains are reviewed in this paper. It is demonstrated that with solid understanding to principles, sound engineering design and proper implementation and execution, electrokinetics can provide viable solutions for challenges facing today's geotechnical engineers.
- 16 May 2011
- Published by American Society of Civil Engineers (ASCE)
- p. 1-8
Electrokinetics: Engineering Applications and Recent Development
Electrokinetics (EK) is the general term used to describe responses of soil water systems to the application of an external electric field, which includes three predominant components, i.e. electro-osmosis, electrophoresis and electrochemical reactions. Electro-osmosis generates water flow in soil mass, electrophoresis induces movement of soil solids and electrochemical reactions lead to emission of oxygen and hydrogen gases, corrosion of anodes, and pH gradients in soil. Although electrokinetics has been studied over more than a century, the recent advances of anode technology have made electrokinetics a viable tool in geo-engineering. The applications of electrokinetics in geotechnical engineering and recent development of electrical vertical drains are reviewed in this paper. It is demonstrated that with solid understanding to principles, sound engineering design and proper implementation and execution, electrokinetics can provide viable solutions for challenges facing today's geotechnical engineers.
- 1 October 2008
- Published by Emerald Publishing in Geosynthetics International
- Vol. 15 (5) , 369-381
Electrokinetic improvement of soft clay using electrical vertical drains
The performance of electrical vertical drains (EVDs) is investigated using laboratory tests and a field test. The electrokinetic treatment generates an increase in the soil undrained shear strength of a natural clay soil from London, Ontario, from 3 kPa to over 100 kPa in the laboratory. The soil undrained shear strength in a field test conducted in marine clay increases from between 5 kPa and 13 kPa to between 22 kPa and 39 kPa on average after only five days of electrokinetic treatment using EVDs. It is observed in laboratory and field tests that the water flow generated by electro-osmosis stops shortly after the application of the electric current. The significant shear strength gains of soils observed in the laboratory and field tests are attributed to the reduction of soil water content and increases in Atterberg limits which result from electrochemical reactions.
- 1 October 2008
- Published by Emerald Publishing in Geosynthetics International
- Vol. 15 (5) , 369-381
Electrokinetic improvement of soft clay using electrical vertical drains
The performance of electrical vertical drains (EVDs) is investigated using laboratory tests and a field test. The electrokinetic treatment generates an increase in the soil undrained shear strength of a natural clay soil from London, Ontario, from 3 kPa to over 100 kPa in the laboratory. The soil undrained shear strength in a field test conducted in marine clay increases from between 5 kPa and 13 kPa to between 22 kPa and 39 kPa on average after only five days of electrokinetic treatment using EVDs. It is observed in laboratory and field tests that the water flow generated by electro-osmosis stops shortly after the application of the electric current. The significant shear strength gains of soils observed in the laboratory and field tests are attributed to the reduction of soil water content and increases in Atterberg limits which result from electrochemical reactions.
- 1 March 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 134 (3) , 352-365
Effects of Electrode Configuration on Electrokinetic Stabilization for Caisson Anchors in Calcareous Sand
The study is on the electrokinetic strengthening of caisson anchors embedded in offshore calcareous sand. The effects of electrode configuration on the effectiveness of electrokinetic treatment are investigated based on electric field analysis and are verified by results from a series of large scale laboratory tests on caisson models of 200 mm diam and 400 mm height, embedded in calcareous sand submerged under seawater. The electrokinetic treatment generates cementation of soil solids as well as bonding between soil and caisson shafts, which leads to increases in the side resistance and overall pullout resistance. The effectiveness of electrokinetic treatment is directly related to the electric field intensity. A linear relationship is observed between the increase in the side resistance and energy consumption. The study shows that the effectiveness of electrokinetic treatments can be maximized by the optimization of the electric field distribution through the electrode configuration.
- 1 March 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Geotechnical and Geoenvironmental Engineering
- Vol. 134 (3) , 352-365
Effects of Electrode Configuration on Electrokinetic Stabilization for Caisson Anchors in Calcareous Sand
The study is on the electrokinetic strengthening of caisson anchors embedded in offshore calcareous sand. The effects of electrode configuration on the effectiveness of electrokinetic treatment are investigated based on electric field analysis and are verified by results from a series of large scale laboratory tests on caisson models of 200 mm diam and 400 mm height, embedded in calcareous sand submerged under seawater. The electrokinetic treatment generates cementation of soil solids as well as bonding between soil and caisson shafts, which leads to increases in the side resistance and overall pullout resistance. The effectiveness of electrokinetic treatment is directly related to the electric field intensity. A linear relationship is observed between the increase in the side resistance and energy consumption. The study shows that the effectiveness of electrokinetic treatments can be maximized by the optimization of the electric field distribution through the electrode configuration.
- 1 January 2000
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 37 (4) , 735-747
Electrokinetic sedimentation of contaminated Welland River sediment
An experimental study on electrokinetic sedimentation of contaminated sediment is conducted. The sediment dredged from the Welland River in Ontario is heavily contaminated by metals, oil, and grease as a result of industrial activities over past decades. Characterization of the sediment is presented, followed by descriptions of the sedimentation columns used in the experiments and testing procedure. The application of electrokinetics on the Welland River sediment suspensions significantly increases the free settling velocity (up to 110%) and final solid concentration (up to 33%) and reduces the coefficient of sedimentation (up to 111%) and overall sedimentation time (up to 50%). These changes are functions of the initial solid concentration and applied electric field intensity. Based on the evaluation of all influencing factors, it is concluded that a continuous dc current generates better performance than intermittent current and electrokinetic sedimentation is more effective than chemical coagulation. All other conditions being equal, the combined application of electrokinetics and FeCl3 generated the best dewatering effect. The electrokinetic treatment generates pH changes ranging from pH 6.0 at the anode to pH 9.4 at the cathode which will generate a negligible environmental impact, as most metal contaminants will not be released to water in this pH range.Key words: electrophoresis, electrokinetics, sedimentation, contaminated sediment, waste management.
- 1 January 2000
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 37 (4) , 735-747
Electrokinetic sedimentation of contaminated Welland River sediment
An experimental study on electrokinetic sedimentation of contaminated sediment is conducted. The sediment dredged from the Welland River in Ontario is heavily contaminated by metals, oil, and grease as a result of industrial activities over past decades. Characterization of the sediment is presented, followed by descriptions of the sedimentation columns used in the experiments and testing procedure. The application of electrokinetics on the Welland River sediment suspensions significantly increases the free settling velocity (up to 110%) and final solid concentration (up to 33%) and reduces the coefficient of sedimentation (up to 111%) and overall sedimentation time (up to 50%). These changes are functions of the initial solid concentration and applied electric field intensity. Based on the evaluation of all influencing factors, it is concluded that a continuous dc current generates better performance than intermittent current and electrokinetic sedimentation is more effective than chemical coagulation. All other conditions being equal, the combined application of electrokinetics and FeCl3 generated the best dewatering effect. The electrokinetic treatment generates pH changes ranging from pH 6.0 at the anode to pH 9.4 at the cathode which will generate a negligible environmental impact, as most metal contaminants will not be released to water in this pH range.Key words: electrophoresis, electrokinetics, sedimentation, contaminated sediment, waste management.