Jon-Paul Maria
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jon-Paul Maria has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Edward Sachet
Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695, United States
2 shared publicationsA. I. Kingon
Department of Materials Science and Engineering, North Carolina State University, Raleigh, USA
1 shared publicationAli Moballegh
Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695, USA
1 shared publicationB. A. Boyette
Department of Materials Science and Engineering, North Carolina State University, Raleigh, USA
1 shared publicationC. Ragaglia
Advanced Technology Materials, Inc., Danbury, USA
1 shared publicationChristina M. Rost
Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695, USA
1 shared publication
Latest Publications
- 18 July 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 4 (8) , 1885-1892
Epsilon-near-Zero Modes and Surface Plasmon Resonance in Fluorine-Doped Cadmium Oxide Thin Films
- 18 July 2017
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 4 (8) , 1885-1892
Epsilon-near-Zero Modes and Surface Plasmon Resonance in Fluorine-Doped Cadmium Oxide Thin Films
- Top Cited PapersOpen Access
- 29 September 2015
- Published by Springer Nature in Nature Communications
- Vol. 6 (1) , 8485
Entropy-stabilized oxides
Configurational disorder can be compositionally engineered into mixed oxide by populating a single sublattice with many distinct cations. The formulations promote novel and entropy-stabilized forms of crystalline matter where metal cations are incorporated in new ways. Here, through rigorous experiments, a simple thermodynamic model, and a five-component oxide formulation, we demonstrate beyond reasonable doubt that entropy predominates the thermodynamic landscape, and drives a reversible solid-state transformation between a multiphase and single-phase state. In the latter, cation distributions are proven to be random and homogeneous. The findings validate the hypothesis that deliberate configurational disorder provides an orthogonal strategy to imagine and discover new phases of crystalline matter and untapped opportunities for property engineering.
- 29 September 2015
- Published by Springer Nature in Nature Communications
- Vol. 6 (1) , 8485
Top Cited PapersOpen AccessEntropy-stabilized oxides
Configurational disorder can be compositionally engineered into mixed oxide by populating a single sublattice with many distinct cations. The formulations promote novel and entropy-stabilized forms of crystalline matter where metal cations are incorporated in new ways. Here, through rigorous experiments, a simple thermodynamic model, and a five-component oxide formulation, we demonstrate beyond reasonable doubt that entropy predominates the thermodynamic landscape, and drives a reversible solid-state transformation between a multiphase and single-phase state. In the latter, cation distributions are proven to be random and homogeneous. The findings validate the hypothesis that deliberate configurational disorder provides an orthogonal strategy to imagine and discover new phases of crystalline matter and untapped opportunities for property engineering.
- 28 February 2011
- Published by Springer Nature in Journal of Materials Research
- Vol. 26 (4) , 592-599
Hydrothermal BaTiO3 thin films from nanostructured Ti templates
- 28 February 2011
- Published by Springer Nature in Journal of Materials Research
- Vol. 26 (4) , 592-599
Hydrothermal BaTiO3 thin films from nanostructured Ti templates
- 1 June 2010
- Published by Springer Nature in Journal of Materials Research
- Vol. 25 (6) , 1064-1071
Property engineering in BaTiO3 films by stoichiometry control
BaTiO3 thin films were prepared on metallic foil substrates using chemical solution deposition. The impact of A to B site cation ratios on the phase assemblage and microstructural and dielectric properties was investigated by characterizing a sample set that includes stoichiometric BaTiO3 and 1, 2, 3, 4, and 5 mol% excess BaO. Each composition was subjected to a high-temperature anneal step with maximum dwell temperatures of 1000, 1100, and 1200 °C for 20 h. Excess barium concentrations greater than 3% lead to dramatic grain growth and average grain sizes exceeding 1 μm. Despite the large deviations from stoichiometry and the 20 h dwell time at temperature, x-ray diffraction, and high-resolution electron microscopy analysis were unable to detect secondary phases until films with 5% excess barium were annealed to 1200 °C. Thin films with 3% excess barium were prepared on copper substrates and annealed at 1060 °C, the practical limit for copper. This combination of BaO excess and annealing temperature produced an average lateral grain size of 0.8 μm and a room-temperature permittivity of 4000. This is in comparison to a permittivity of 1800 for stoichiometric material prepared using identical conditions. This work suggests metastable solubility of BaO in BaTiO3 that leads to enhanced grain growth and large permittivity values. This technique provides a new solid-state means of achieving grain growth in low thermal budget systems.
- 1 June 2010
- Published by Springer Nature in Journal of Materials Research
- Vol. 25 (6) , 1064-1071
Property engineering in BaTiO3 films by stoichiometry control
BaTiO3 thin films were prepared on metallic foil substrates using chemical solution deposition. The impact of A to B site cation ratios on the phase assemblage and microstructural and dielectric properties was investigated by characterizing a sample set that includes stoichiometric BaTiO3 and 1, 2, 3, 4, and 5 mol% excess BaO. Each composition was subjected to a high-temperature anneal step with maximum dwell temperatures of 1000, 1100, and 1200 °C for 20 h. Excess barium concentrations greater than 3% lead to dramatic grain growth and average grain sizes exceeding 1 μm. Despite the large deviations from stoichiometry and the 20 h dwell time at temperature, x-ray diffraction, and high-resolution electron microscopy analysis were unable to detect secondary phases until films with 5% excess barium were annealed to 1200 °C. Thin films with 3% excess barium were prepared on copper substrates and annealed at 1060 °C, the practical limit for copper. This combination of BaO excess and annealing temperature produced an average lateral grain size of 0.8 μm and a room-temperature permittivity of 4000. This is in comparison to a permittivity of 1800 for stoichiometric material prepared using identical conditions. This work suggests metastable solubility of BaO in BaTiO3 that leads to enhanced grain growth and large permittivity values. This technique provides a new solid-state means of achieving grain growth in low thermal budget systems.
- 1 July 2007
- Published by Springer Nature in Journal of Materials Research
- Vol. 22 (7) , 1763-1766
Smart electrodes for ultralarge-area thin film capacitors
A process suitable for preparing metal-insulator-metal thin film capacitors with submicron insulating layers and top electrodes with cm-scale dimensions is presented. Most importantly, this process does not require sophisticated deposition equipment or a clean room environment. The key to large area yield is co-firing the insulator film with a non-dewetting electrode during the dielectric crystallization/densification anneal. We propose a mechanism of electrode dewetting during the high temperature anneal where the metal laterally retreats from geometric asperities that compromise the integrity of the insulating layer. This behavior is driven by surface energy minimization, which promotes metal migration away from the regions of high curvature. This methodology is not material specific, and only requires a top electrode with a large contact angle to the dielectric in question. Using this technique, functional thin film capacitors with 2.5 cm lateral dimensions and 1 μm dielectric thicknesses can be routinely prepared.
- 1 July 2007
- Published by Springer Nature in Journal of Materials Research
- Vol. 22 (7) , 1763-1766
Smart electrodes for ultralarge-area thin film capacitors
A process suitable for preparing metal-insulator-metal thin film capacitors with submicron insulating layers and top electrodes with cm-scale dimensions is presented. Most importantly, this process does not require sophisticated deposition equipment or a clean room environment. The key to large area yield is co-firing the insulator film with a non-dewetting electrode during the dielectric crystallization/densification anneal. We propose a mechanism of electrode dewetting during the high temperature anneal where the metal laterally retreats from geometric asperities that compromise the integrity of the insulating layer. This behavior is driven by surface energy minimization, which promotes metal migration away from the regions of high curvature. This methodology is not material specific, and only requires a top electrode with a large contact angle to the dielectric in question. Using this technique, functional thin film capacitors with 2.5 cm lateral dimensions and 1 μm dielectric thicknesses can be routinely prepared.
- 1 January 2005
- Published by Springer Nature in Journal of Electroceramics
- Vol. 14 (1) , 75-81
Low Loss Tungsten-Based Electrode Technology for Microwave Frequency BST Varactors
- 1 January 2005
- Published by Springer Nature in Journal of Electroceramics
- Vol. 14 (1) , 75-81
Low Loss Tungsten-Based Electrode Technology for Microwave Frequency BST Varactors
- 1 January 2005
- Published by Springer Nature in MRS Proceedings
- Vol. 902
Synthesis and Properties of Barium Titanate Thin Films Deposited on Copper Foil Substrates
- 1 January 2005
- Published by Springer Nature in MRS Proceedings
- Vol. 902
Synthesis and Properties of Barium Titanate Thin Films Deposited on Copper Foil Substrates