Bhojan Vidhya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Bhojan Vidhya has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Raju Nandhakumar
Fluorensic Materials Lab, Division of Physical Science, Karunya Institute of Technology and Sciences, (Deemed-to-be University), Karunya Nagar, Coimbatore 641 114, India
12 shared publications J. Deepak Rosario
6 shared publications- Swaminathan Rajesh
Karunya Institute of Technology and Sciences
6 shared publications Anju Sebastian
Department of Physics, Karunya Institute of Technology and Sciences, Coimbatore, India
5 shared publicationsR. Ranjithkumar
5 shared publications- Sakunthala Ayyasamy
Karunya Institute of Technology and Sciences
5 shared publications
Latest Publications
- 24 August 2026
- Published by Taylor & Francis
- p. 160-180
Piezoelectric nanogenerators
Miniaturization of electronic components eases the fabrication of tiny portable devices like smartwatches, phones, and laptops. These compact devices play a significant role in the latest technologies supporting various advanced industries. Specifically, the bio-implant industry benefits from miniaturized devices like pacemakers, pressure sensors, and nerve stimulators. On the other side powering these tiny devices poses a major challenge. To address these shortcomings, research and development on energy-harvesting self-sustaining power systems mark a crucial advancement. These energy-harvesting systems replace the bulky conventional batteries that have a short lifespan and need periodic replacement. One of the most notable innovations in this segment is the nanogenerator (NG), which converts ambient energy into electrical power. In recent years, research into NGs has expanded. These NGs are categorized with respect to the energy conversion, such as mechanical, thermal, or electrical, into piezoelectric nanogenerators (PENGs), triboelectric nanogenerators (TENGs), and pyroelectric nanogenerators, respectively. Among these, piezoelectric NGs are more attractive based on their simple fabrication methods, high energy conversion efficiency, cost-effectiveness, and adaptability to a wide range of applications.
- 24 August 2026
- Published by Taylor & Francis
- p. 160-180
Piezoelectric nanogenerators
Miniaturization of electronic components eases the fabrication of tiny portable devices like smartwatches, phones, and laptops. These compact devices play a significant role in the latest technologies supporting various advanced industries. Specifically, the bio-implant industry benefits from miniaturized devices like pacemakers, pressure sensors, and nerve stimulators. On the other side powering these tiny devices poses a major challenge. To address these shortcomings, research and development on energy-harvesting self-sustaining power systems mark a crucial advancement. These energy-harvesting systems replace the bulky conventional batteries that have a short lifespan and need periodic replacement. One of the most notable innovations in this segment is the nanogenerator (NG), which converts ambient energy into electrical power. In recent years, research into NGs has expanded. These NGs are categorized with respect to the energy conversion, such as mechanical, thermal, or electrical, into piezoelectric nanogenerators (PENGs), triboelectric nanogenerators (TENGs), and pyroelectric nanogenerators, respectively. Among these, piezoelectric NGs are more attractive based on their simple fabrication methods, high energy conversion efficiency, cost-effectiveness, and adaptability to a wide range of applications.
- 14 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. PP (00933813) , 1-8
PVA Nanocomposites Reinforced With Plasma-Functionalized MWCNTs: A Sustainable Path to Enhanced Structure and Thermal Properties
Poly(vinyl alcohol) (PVA), untreated multiwalled carbon nanotube (MWCNT)/PVA, and nitrogen plasma-functionalized MWCNT (N-MWCNT)/PVA nanocomposites were fabricated via the solution-casting method to investigate the effects of nanotube surface treatment on the dielectric and thermal properties of the composite. A fixed concentration of MWCNTs was used across all nanocomposite samples. Comprehensive characterization was performed using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and contact angle measurements. Dielectric constant was also assessed. The results revealed that plasma-treated MWCNTs exhibit enhanced dispersion within the PVA matrix, resulting in improved crystallinity and elevated thermal stability of the composite films. These enhancements are attributed to the introduction of polar functional groups on the MWCNTs surface during plasma treatment, which promote stronger interactions with PVA chains. This work provides a sustainable and environmentally friendly approach to high-performance nanocomposites. Potential applications include flexible electronics, dielectric films, and thermally robust coatings.
- 14 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. PP (00933813) , 1-8
PVA Nanocomposites Reinforced With Plasma-Functionalized MWCNTs: A Sustainable Path to Enhanced Structure and Thermal Properties
Poly(vinyl alcohol) (PVA), untreated multiwalled carbon nanotube (MWCNT)/PVA, and nitrogen plasma-functionalized MWCNT (N-MWCNT)/PVA nanocomposites were fabricated via the solution-casting method to investigate the effects of nanotube surface treatment on the dielectric and thermal properties of the composite. A fixed concentration of MWCNTs was used across all nanocomposite samples. Comprehensive characterization was performed using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and contact angle measurements. Dielectric constant was also assessed. The results revealed that plasma-treated MWCNTs exhibit enhanced dispersion within the PVA matrix, resulting in improved crystallinity and elevated thermal stability of the composite films. These enhancements are attributed to the introduction of polar functional groups on the MWCNTs surface during plasma treatment, which promote stronger interactions with PVA chains. This work provides a sustainable and environmentally friendly approach to high-performance nanocomposites. Potential applications include flexible electronics, dielectric films, and thermally robust coatings.
- Open Access
- 30 September 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (10) , 2571-2577
TiO2-Anchored Graphene Nanocomposite as Robust Fluorometric Sensor for Ag+ Ions and its Real Sample Analysis
A hybrid nanocomposite comprised of reduced graphene oxide and titanium dioxide (rGO-TiO2) was synthesized from graphite following reduced graphene oxide synthesis, which utilized a modified Hummer’s method and then subsequently reduced. The optical, morphological and structural properties of the hybrid composite were characterized with FTIR, UV-Vis, SEM, XRD and photoluminescence spectroscopy. The rGO-TiO2 composite retains its in-solution affinity and selectivity for Ag+ ions in an aqueous medium in spite of the presence of other metal ions. The sensing capabilities of this fluorometric sensor arise from the inhibition of photoinduced electron transfer mechanism (PET). The rGO-TiO2 hybrid composite represents a low-cost, sensitive and effective sensing platform for the hazardous monitoring of metal ions under ambient conditions, particularly silver.
- 30 September 2025
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 37 (10) , 2571-2577
Open AccessTiO2-Anchored Graphene Nanocomposite as Robust Fluorometric Sensor for Ag+ Ions and its Real Sample Analysis
A hybrid nanocomposite comprised of reduced graphene oxide and titanium dioxide (rGO-TiO2) was synthesized from graphite following reduced graphene oxide synthesis, which utilized a modified Hummer’s method and then subsequently reduced. The optical, morphological and structural properties of the hybrid composite were characterized with FTIR, UV-Vis, SEM, XRD and photoluminescence spectroscopy. The rGO-TiO2 composite retains its in-solution affinity and selectivity for Ag+ ions in an aqueous medium in spite of the presence of other metal ions. The sensing capabilities of this fluorometric sensor arise from the inhibition of photoinduced electron transfer mechanism (PET). The rGO-TiO2 hybrid composite represents a low-cost, sensitive and effective sensing platform for the hazardous monitoring of metal ions under ambient conditions, particularly silver.
- 30 October 2024
- Published by Elsevier in Diamond and Related Materials
- Vol. 150
Synergistic effect of argon plasma and heterojunction of g-C3N4 and GO on BiVO4 for photocatalytic application
- 30 October 2024
- Published by Elsevier in Diamond and Related Materials
- Vol. 150
Synergistic effect of argon plasma and heterojunction of g-C3N4 and GO on BiVO4 for photocatalytic application
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (6) , 2168-2179
Influence of Post Plasma Treatment on the Photocatalytic Activity of BiVO₄ Synthesized by Surfactant-Assisted Hydrothermal Method
Monoclinic bismuth vanadium oxide (BiVO $_{4})$ has been synthesized by solvothermal method with the assistance of surfactant, and the prepared sample was treated with cold plasma in argon atmosphere. The hydrothermal temperature has been controlled at 80 $^{\circ}$ C for 3 h in hot air oven. Four different surfactants were used, i.e., hexamine, PEG, PVA, and PVP. The prepared samples were subjected to argon plasma treatment for 20 min with glow discharge (GD) plasma technique. The morphology and structural properties have been analyzed with SEM and XRD, respectively. The optical property has been evaluated and showed higher absorbance in UV–visible light region. Photocatalytic activity of PEG added BiVO $_{4}$ showed higher degradation for methylene blue dye, i.e., 56% in 180 min under visible light illumination. The result has been further supported by PL and Raman analyses. The BET analysis was used to detect the pore size and specific surface area of the samples. Furthermore, the reusability of the photocatalyst was evaluated by the stability test. The XPS and TEM analyses analyze the composition and crystalline nature of the prepared sample. The GCMS analysis of MB dye degradation has inferred the stability of the sample after dye degradation. The GCMS analysis and reusability test confirm the stability of PG after the photocatalysis process and confirm that the plasma treatment has helped in the stability of PG.
- 26 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (6) , 2168-2179
Influence of Post Plasma Treatment on the Photocatalytic Activity of BiVO₄ Synthesized by Surfactant-Assisted Hydrothermal Method
Monoclinic bismuth vanadium oxide (BiVO $_{4})$ has been synthesized by solvothermal method with the assistance of surfactant, and the prepared sample was treated with cold plasma in argon atmosphere. The hydrothermal temperature has been controlled at 80 $^{\circ}$ C for 3 h in hot air oven. Four different surfactants were used, i.e., hexamine, PEG, PVA, and PVP. The prepared samples were subjected to argon plasma treatment for 20 min with glow discharge (GD) plasma technique. The morphology and structural properties have been analyzed with SEM and XRD, respectively. The optical property has been evaluated and showed higher absorbance in UV–visible light region. Photocatalytic activity of PEG added BiVO $_{4}$ showed higher degradation for methylene blue dye, i.e., 56% in 180 min under visible light illumination. The result has been further supported by PL and Raman analyses. The BET analysis was used to detect the pore size and specific surface area of the samples. Furthermore, the reusability of the photocatalyst was evaluated by the stability test. The XPS and TEM analyses analyze the composition and crystalline nature of the prepared sample. The GCMS analysis of MB dye degradation has inferred the stability of the sample after dye degradation. The GCMS analysis and reusability test confirm the stability of PG after the photocatalysis process and confirm that the plasma treatment has helped in the stability of PG.
- 26 December 2023
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 53 (2) , 1058-1066
Influence of h-BN Concentration on the Development of PVDF-HFP/TiO2/h-BN Nanocomposite Films for Electroadhesive Applications
- 26 December 2023
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 53 (2) , 1058-1066
Influence of h-BN Concentration on the Development of PVDF-HFP/TiO2/h-BN Nanocomposite Films for Electroadhesive Applications
- 9 December 2023
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 109 (2) , 362-375
Deposition and characterization of ZnO/CdSe/SnSe ternary thin film based photocatalyst for an enhanced visible light-driven photodegradation of model pollutants
- 9 December 2023
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 109 (2) , 362-375
Deposition and characterization of ZnO/CdSe/SnSe ternary thin film based photocatalyst for an enhanced visible light-driven photodegradation of model pollutants
- 7 September 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 968
An insight on the growth mechanism of Cu2ZnSnS4 via hydrothermal route
- 7 September 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 968
An insight on the growth mechanism of Cu2ZnSnS4 via hydrothermal route