JTJ. M. Titchmarsh

J. M. Titchmarsh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


J. M. Titchmarsh has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • TEM investigations of intergranular stress corrosion cracking in austenitic alloys in PWR environmental conditions

    by S. Lozano-Perez, J.M. Titchmarsh

    Analytical transmission microscopy has been used to investigate the initiation of stress corrosion cracking in Inconel 600 subjected to constant load testing under simulated pressured water reactor primary water conditions. The observations revealed that intergranular attack proceeded by the development of a zone of polycrystalline chromia along the boundary plane intersecting either the free surface or a blunted, open crack in contact with the free surface. Ni-rich metal particles were interspersed within the chromia. Conversely, open cracks were filled with nanocrystalline NiO and large compound particles of spinel and NiO, indicating a difference in potential between closed, attacked boundaries and open cracks. Open cracks appeared to have initiated by fracture of the chromia zones, such fracture being strongly dependent on boundary geometry with respect to loading direction. The observations suggest that stress corrosion crack initiation and propagation is dependent on diffusion of oxygen through the porous oxides. Dislocations and stress could enhance diffusion as chromia was observed along slip planes at the arrested tips of blunt cracks


  • Preparation of transmission electron microscopy cross‐section specimens of crack tips using focused ion beam milling

    by Y. Z. Huang, S. Lozano‐Perez, R. M. Langford, J. M. Titchmarsh, M. L. Jenkins

    Summary: The preparation of transmission electron microscope (TEM) thin foil specimens from metal alloys containing cracks is usually thwarted by the difficulty in preventing preferential erosion of material along the flanks and at the tips of cracks. Recent developments in focused ion beam (FIB) micromachining methods have the potential to overcome this inherent problem. In this article we describe the development of new procedures, one using FIB alone and the other using a combination of FIB with more conventional ion milling to generate TEM specimens that largely retain the microstructural information at stress corrosion cracks in austentic alloys. Examples of corrosion product phase identification and interfacial segregation are included to verify that detailed information is not destroyed by ion bombardment during specimen preparation.