KSKanai Shah

Kanai Shah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kanai Shah has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Estimation of Fano factor in inorganic scintillators

    by Vaibhav Bora, Harrison H. Barrett, David Fastje, Eric Clarkson, Lars Furenlid, Abdelkader Bousselham, Kanai S. Shah, Jarek Glodo


  • Triplet harvesting plastic scintillators with neutron-gamma pulse shape discrimination

    by Edgar V. van Loef, Patrick Feng, Gary Markosyan, Urmila Shirwadkar, Patrick Doty, Kanai Shah

    In this paper we report on plastic scintillators that contain organometallic iridium compounds as triplet harvesting complexes for neutron-gamma pulse shape discrimination (PSD). Our results show that these plastic scintillators have a relatively high light output (higher than BGO) and exhibit very good neutron-gamma PSD with a Figure-of-Merit of ≥ 2.0 at 2.5 MeVee cut-off energy. Under X-ray excitation, the radioluminescence spectrum exhibits a broad band between 400 and 650 nm peaking at 470 nm which is well-matched to bialkali photomultiplier tubes and UV-enhanced photodiodes. The scintillation decay due to Ir3+ luminescence is of the order of 1 us.


  • Instrument Development and Gamma Spectroscopy With Strontium Iodide

    by Nerine J. Cherepy, Steve A. Payne, Benjamin W. Sturm, Owen B. Drury, Sean P. O'Neal, Peter A. Thelin, Kanai S. Shah, Rastgo Hawrami, Michael Momayezi, Brad Hurst, et al.

    Development of the Europium-doped Strontium Iodide scintillator, SrI2(Eu), involves advances in crystal growth, optics and readout methodology for prototype detectors. We have demonstrated energy resolution of 3% at 662 keV for a 26 cm3 SrI2(Eu) crystal, which is equivalent to the performance obtained with Cerium-doped Lanthanum Bromide of equivalent size. Compared to standard analog readout, use of a digital readout method allows improved energy resolution to be obtained with large volume SrI2(Eu) crystals. Comparative gamma spectra acquired with LaBr3(Ce) and NaI(Tl) quantitatively depict the value of the high resolution of SrI2(Eu) in discriminating closely spaced gamma lines for radioisotope identification applications.


  • Prospects for High Energy Resolution Gamma Ray Spectroscopy with Europium-Doped Strontium Iodide

    by Nerine Cherepy, S A. Payne, Rastgo Hawrami, A Burger, Lynn Boatner, Edgar Van Loef, Kanai Shah


  • High Resolution Sensor for Nuclear Waste Characterization

    by Kanai Shah, William Higgins, Edgar V Van Loef

    Gamma ray spectrometers are an important tool in the characterization of radioactive waste. Important requirements for gamma ray spectrometers used in this application include good energy resolution, high detection efficiency, compact size, light weight, portability, and low power requirements. None of the available spectrometers satisfy all of these requirements. The goal of the Phase I research was to investigate lanthanum halide and related scintillators for nuclear waste clean-up. LaBr3:Ce remains a very promising scintillator with high light yield and fast response. CeBr3 is attractive because it is very similar to LaBr3:Ce in terms of scintillation properties and also has the advantage of much lower self-radioactivity, which may be important in some applications. CeBr3 also shows slightly higher light yield at higher temperatures than LaBr3 and may be easier to produce with high uniformity in large volume since it does not require any dopants. Among the mixed lanthanum halides, the light yield of LaBrxI3-x:Ce is lower and the difference in crystal structure of the binaries (LaBr3 and LaI3) makes it difficult to grow high quality crystals of the ternary as the iodine concentration is increased. On the other hand, LaBrxCl3-x:Ce provides excellent performance. Its light output is high and it providesmore » fast response. The crystal structures of the two binaries (LaBr3 and LaCl3) are very similar. Overall, its scintillation properties are very similar to those for LaBr3:Ce. While the gamma-ray stopping efficiency of LaBrxCl3-x:Ce is lower than that for LaBr3:Ce (primarily because the density of LaCl3 is lower than that of LaBr3), it may be easier to grow large crystals of LaBrxCl3-x:Ce than LaBr3:Ce since in some instances (for example, CdxZn1-xTe), the ternary compounds provide increased flexibility in the crystal lattice. Among the new dopants, Eu2+ and Pr3+, tried in LaBr3 host crystals, the Eu2+ doped samples exhibited low light output. This was mostly because a large fraction of light was emitted via very slow decay components (>50 ­s) and as a result was not included in the light estimation performed using gamma-ray spectroscopy where the typical amplifier integration time used is <12 ­s. The origin of these slow component(s) is most likely related to the presence of defects caused by charge imbalance in the crystals. The charge imbalance occurs when the Eu2+ ions replace the La3+ ions in crystal lattice. This charge neutrality can be restored by codoping the Eu2+ doped LaBr3 crystals with ions such as Hf4+. The Pr3+ doped LaBr3 crystals provided exciting results. They exhibited very high light yield (85,000 photons/MeV) and good energy resolution. While the decay time of LaBr3:Pr is much slower than that for LaBr3:Ce, it is fast enough for many nuclear waste cleanup applications. Furthermore, it should be possible to increase the speed of LaBr3:Pr by adjusting its Pr3+ concentration. The most exciting feature of LaBr3:Pr is that it emits in red-region and is therefore, well suited for silicon photodiode readout. In fact, LaBr3:Pr is the brightest scintillator in the red-region and its light yield is ~15% higher than the light yield of LaBr3 doped with Ce. Overall, the Phase I research has been very successful and has lead to better understanding of the lanthanum halide and related scintillators. It has also opened up some promising avenues to optimize the performance of these exciting scintillators. Based on the Phase I results, we have clearly demonstrated the feasibility of the proposed approach.« less