Bruce J. Haines
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bruce J. Haines has a total of 80 co-authors. Here are the top co-authors by number of shared publications:
- Jinbo Wang
Texas A&M University
3 shared publications - Lee-Lueng Fu
Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA
3 shared publications Scott Stalin
NOAA Pacific Marine Environmental Laboratory Seattle WA USA
3 shared publications- Andrew. J. Lucas
Scripps Institution of Oceanography University of California San Diego San Diego CA USA
2 shared publications - Athina Peidou
Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA
2 shared publications Christian Meinig
Pacific Marine Environmental Laboratory NOAA/R/PMEL Seattle WA USA
2 shared publications
Latest Publications
- Open Access
- 29 November 2025
- Published by American Geophysical Union (AGU) in Earth and Space Science
- Vol. 12 (12)
In Situ Validation of Small‐Scale Spatial Variability in Significant Wave Height Observations From SWOT
Ocean surface wave climates are shaped by both atmospheric forcing and underlying ocean conditions. Variability in open‐ocean wave heights subsequently reflects complex interactions occurring across a broad range of spatial and temporal scales. Many of the processes driving this variability take place at small spatial scales that have been previously poorly resolved by sparse altimetry observations and coarse global wave models. The Surface Water and Ocean Topography (SWOT) mission offers a new opportunity to observe variability at these scales with unprecedented two‐dimensional measurements of significant wave height (SWH) from the Ka‐band radar interferometer (KaRIn). In this study, we evaluate the accuracy of SWOT's KaRIn SWH estimates at an open‐ocean calibration site off Central California by comparing them to in situ wave measurements from a closely spaced array of buoys. SWOT KaRIn SWH measurements are validated at the calibration site with high fidelity and perform consistently in additional comparison to a network of coastal wave buoys. The centered root‐mean‐square error ranges from 0.10 to 0.17 m across the various data sets and product versions, with correlation coefficients exceeding 0.98. Additionally we show that SWOT is capable of accurately resolving gradients in wave conditions over short spatial scales (10–90 km), and the high resolution two‐dimensional KaRIn observations better represents spatial variability in SWH than either traditional altimetry or coarse‐grid operational numerical wave models run without currents. Overall, these findings validate SWOT's wide‐swath observations as a powerful tool for observing and understanding ocean surface wave conditions and their connection to broader ocean‐atmosphere dynamics.
- 29 November 2025
- Published by American Geophysical Union (AGU) in Earth and Space Science
- Vol. 12 (12)
Open AccessIn Situ Validation of Small‐Scale Spatial Variability in Significant Wave Height Observations From SWOT
Ocean surface wave climates are shaped by both atmospheric forcing and underlying ocean conditions. Variability in open‐ocean wave heights subsequently reflects complex interactions occurring across a broad range of spatial and temporal scales. Many of the processes driving this variability take place at small spatial scales that have been previously poorly resolved by sparse altimetry observations and coarse global wave models. The Surface Water and Ocean Topography (SWOT) mission offers a new opportunity to observe variability at these scales with unprecedented two‐dimensional measurements of significant wave height (SWH) from the Ka‐band radar interferometer (KaRIn). In this study, we evaluate the accuracy of SWOT's KaRIn SWH estimates at an open‐ocean calibration site off Central California by comparing them to in situ wave measurements from a closely spaced array of buoys. SWOT KaRIn SWH measurements are validated at the calibration site with high fidelity and perform consistently in additional comparison to a network of coastal wave buoys. The centered root‐mean‐square error ranges from 0.10 to 0.17 m across the various data sets and product versions, with correlation coefficients exceeding 0.98. Additionally we show that SWOT is capable of accurately resolving gradients in wave conditions over short spatial scales (10–90 km), and the high resolution two‐dimensional KaRIn observations better represents spatial variability in SWH than either traditional altimetry or coarse‐grid operational numerical wave models run without currents. Overall, these findings validate SWOT's wide‐swath observations as a powerful tool for observing and understanding ocean surface wave conditions and their connection to broader ocean‐atmosphere dynamics.
- Top Cited PapersOpen Access
- 6 June 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (11)
SWOT Mission Validation of Sea Surface Height Measurements at Sub‐100 km Scales
After two decades of development, the Surface Water and Ocean Topography (SWOT) mission launched on 16 December 2022, pioneering the use of Ka‐band Radar Interferometry (KaRIn) for measuring water surface elevation and achieving two‐dimensional altimetry on two 50 km swaths separated by a 20 km nadir gap. Rigorous validation against in situ observations in this study demonstrates that KaRIn achieves enough accuracy to resolve sub‐100 km oceanic processes, with measurement errors 2–4 times smaller than anticipated. These results confirm SWOT's transformative capabilities for advancing oceanographic research and establishing a robust foundation for future applications of the swath altimetry. The results also underscore the innovative advancements in mooring system design, driven by the stringent science requirements of the SWOT mission.
- 6 June 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (11)
Top Cited PapersOpen AccessSWOT Mission Validation of Sea Surface Height Measurements at Sub‐100 km Scales
After two decades of development, the Surface Water and Ocean Topography (SWOT) mission launched on 16 December 2022, pioneering the use of Ka‐band Radar Interferometry (KaRIn) for measuring water surface elevation and achieving two‐dimensional altimetry on two 50 km swaths separated by a 20 km nadir gap. Rigorous validation against in situ observations in this study demonstrates that KaRIn achieves enough accuracy to resolve sub‐100 km oceanic processes, with measurement errors 2–4 times smaller than anticipated. These results confirm SWOT's transformative capabilities for advancing oceanographic research and establishing a robust foundation for future applications of the swath altimetry. The results also underscore the innovative advancements in mooring system design, driven by the stringent science requirements of the SWOT mission.
- Open Access
- 22 January 2025
- Published by Wiley
SWOT sub-100 km science validation
After two decades of development, the Surface Water and Ocean Topography (SWOT) mission launched on December 16, 2022, pioneering the use of Ka-band Radar Interferometry (KaRIn) for measuring water surface elevation and achieving wide-swath, two-dimensional altimetry. Rigorous validation against in-situ observations in this study demonstrates that KaRIn achieves enough accuracy to resolve sub-100 km oceanic processes, with measurement errors four times smaller than anticipated. These results confirm SWOT’s transformative capabilities for advancing oceanographic research, validating the high fidelity of the advanced mooring systems and establishing a robust foundation for future applications of the wide-swath altimetry.
- 22 January 2025
- Published by Wiley
Open AccessSWOT sub-100 km science validation
After two decades of development, the Surface Water and Ocean Topography (SWOT) mission launched on December 16, 2022, pioneering the use of Ka-band Radar Interferometry (KaRIn) for measuring water surface elevation and achieving wide-swath, two-dimensional altimetry. Rigorous validation against in-situ observations in this study demonstrates that KaRIn achieves enough accuracy to resolve sub-100 km oceanic processes, with measurement errors four times smaller than anticipated. These results confirm SWOT’s transformative capabilities for advancing oceanographic research, validating the high fidelity of the advanced mooring systems and establishing a robust foundation for future applications of the wide-swath altimetry.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
A New Realization of the Terrestrial Reference Frame: Combining GPS, SLR and VLBI at the Observation Level from 2010–2022
We describe the development and assessment of a new terrestrial reference frame (TRF) based on combining GPS, SLR and VLBI at the observation level over the period 2010–2022. Included in the solution, in addition to station coordinates and precise orbit solutions for all participating satellites, are Earth orientation parameters (EOP) and low-degree zonal coefficients (J2 and J3) of the geopotential. The overall solution concept grew from earlier efforts to realize a TRF using GPS data alone, capitalizing on GPS receivers on the ground and in low-Earth orbit (LEO). Here we add observations from both the SLR and VLBI techniques, which provide the foundation for traditional realizations of the TRF.In linking the GPS and SLR techniques, our approach dispenses with traditional ground survey ties, relying exclusively on space ties from the GRACE and Jason LEO missions. In addition to SLR from these satellites, we include observations from the dedicated LAGEOS satellites, which prove particularly important for recovering low-degree gravity. A major evolution of our approach is the addition of VLBI at the observation level. Lacking a robust tie in Earth orbit for VLBI observations, we apply as constraints the published ground survey ties to nearby GPS stations, enforcing inclusion of the corresponding tracking data in the solutions. The VLBI effort is in the exploratory phase, and further tuning of the strategy is needed to better exploit collocations with both GPS and SLR. About 40% of the participating solution arcs (spanning 2010–2022) now include VLBI and support accurate recovery of UT1 as part of the EOP solution.Though the resulting TRF solution is based on only 12.6 years of data, it is competitive with ITRF2020 in terms of fundamental frame parameters (origin and scale) and their temporal evolution, both linear and seasonal. The relative rates of origin (3D) and scale (at Earth's surface) are 0.2 mm yr-1 and 0.1 mm yr-1 respectively. Absolute scale (at epoch 2015.0) and 3D origin both differ by 2 mm. One advantage of our technique is that precise orbit solutions for both GRACE and Jason missions, defined in the realized TRF, are byproducts of the overall solution. We use the Jason orbit solutions to characterize the impact of contemporary TRF errors on sea level variations (both global and regional) and discuss the implications of these results.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessA New Realization of the Terrestrial Reference Frame: Combining GPS, SLR and VLBI at the Observation Level from 2010–2022
We describe the development and assessment of a new terrestrial reference frame (TRF) based on combining GPS, SLR and VLBI at the observation level over the period 2010–2022. Included in the solution, in addition to station coordinates and precise orbit solutions for all participating satellites, are Earth orientation parameters (EOP) and low-degree zonal coefficients (J2 and J3) of the geopotential. The overall solution concept grew from earlier efforts to realize a TRF using GPS data alone, capitalizing on GPS receivers on the ground and in low-Earth orbit (LEO). Here we add observations from both the SLR and VLBI techniques, which provide the foundation for traditional realizations of the TRF.In linking the GPS and SLR techniques, our approach dispenses with traditional ground survey ties, relying exclusively on space ties from the GRACE and Jason LEO missions. In addition to SLR from these satellites, we include observations from the dedicated LAGEOS satellites, which prove particularly important for recovering low-degree gravity. A major evolution of our approach is the addition of VLBI at the observation level. Lacking a robust tie in Earth orbit for VLBI observations, we apply as constraints the published ground survey ties to nearby GPS stations, enforcing inclusion of the corresponding tracking data in the solutions. The VLBI effort is in the exploratory phase, and further tuning of the strategy is needed to better exploit collocations with both GPS and SLR. About 40% of the participating solution arcs (spanning 2010–2022) now include VLBI and support accurate recovery of UT1 as part of the EOP solution.Though the resulting TRF solution is based on only 12.6 years of data, it is competitive with ITRF2020 in terms of fundamental frame parameters (origin and scale) and their temporal evolution, both linear and seasonal. The relative rates of origin (3D) and scale (at Earth's surface) are 0.2 mm yr-1 and 0.1 mm yr-1 respectively. Absolute scale (at epoch 2015.0) and 3D origin both differ by 2 mm. One advantage of our technique is that precise orbit solutions for both GRACE and Jason missions, defined in the realized TRF, are byproducts of the overall solution. We use the Jason orbit solutions to characterize the impact of contemporary TRF errors on sea level variations (both global and regional) and discuss the implications of these results.
- Open Access
- 17 December 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (12)
A Global Combination of Geodetic Techniques at the Observation Level: New Perspectives on the Terrestrial Reference Frame
We describe the development and assessment of a new terrestrial reference frame (TRF) based on a combination of geodetic techniques at the observation level over the period 2010–2022. Included in the solution are observations from the Global Positioning System (GPS), Satellite Laser Ranging (SLR) and Very Long Baseline Interferometry (VLBI). A key feature of our solution strategy is the use of space ties in low‐Earth orbit to connect SLR to GPS. Though the resulting TRF solution is based on only 12.6 years of data, it is competitive with the international (ITRF2020) standard in terms of fundamental frame parameters (origin and scale) and their temporal evolution, both linear and seasonal. The relative rates of origin (3D) and scale (at Earth's surface) are 0.2 mm and 0.1 mm respectively. Absolute scale and 3D origin (at epoch 2015.0) both differ by 2–3 mm. In addition to station positions and velocities, our combined solution includes Earth orientation parameters (EOP), low‐degree zonal coefficients (J2 and J3) of the geopotential and precise orbit solutions for all participating satellites (GPS, GRACE and GRACE Follow‐on tandems, Jason 2 and 3, and LAGEOS 1 and 2). We discuss potential benefits of our solution strategy and characterize the impacts of our new TRF on estimates of geocenter motion and sea level change from satellite altimetry.
- 17 December 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (12)
Open AccessA Global Combination of Geodetic Techniques at the Observation Level: New Perspectives on the Terrestrial Reference Frame
We describe the development and assessment of a new terrestrial reference frame (TRF) based on a combination of geodetic techniques at the observation level over the period 2010–2022. Included in the solution are observations from the Global Positioning System (GPS), Satellite Laser Ranging (SLR) and Very Long Baseline Interferometry (VLBI). A key feature of our solution strategy is the use of space ties in low‐Earth orbit to connect SLR to GPS. Though the resulting TRF solution is based on only 12.6 years of data, it is competitive with the international (ITRF2020) standard in terms of fundamental frame parameters (origin and scale) and their temporal evolution, both linear and seasonal. The relative rates of origin (3D) and scale (at Earth's surface) are 0.2 mm and 0.1 mm respectively. Absolute scale and 3D origin (at epoch 2015.0) both differ by 2–3 mm. In addition to station positions and velocities, our combined solution includes Earth orientation parameters (EOP), low‐degree zonal coefficients (J2 and J3) of the geopotential and precise orbit solutions for all participating satellites (GPS, GRACE and GRACE Follow‐on tandems, Jason 2 and 3, and LAGEOS 1 and 2). We discuss potential benefits of our solution strategy and characterize the impacts of our new TRF on estimates of geocenter motion and sea level change from satellite altimetry.
- Open Access
- 9 January 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (1) , 83
The Benefits of the Ka-Band as Evidenced from the SARAL/AltiKa Altimetric Mission: Quality Assessment and Unique Characteristics of AltiKa Data
The India-France SARAL/AltiKa mission is the first Ka-band altimetric mission dedicated to oceanography. The mission objectives are primarily the observation of the oceanic mesoscales but also include coastal oceanography, global and regional sea level monitoring, data assimilation, and operational oceanography. The mission ended its nominal phase after 3 years in orbit and began a new phase (drifting orbit) in July 2016. The objective of this paper is to provide a state of the art of the achievements of the SARAL/AltiKa mission in terms of quality assessment and unique characteristics of AltiKa data. It shows that the AltiKa data have similar accuracy at the centimeter level in term of absolute water level whatever the method (from local to global) and the type of water surfaces (ocean and lakes). It shows also that beyond the fact that AltiKa data quality meets the expectations and initial mission requirements, the unique characteristics of the altimeter and the Ka-band offer unique contributions in fields that were previously not fully foreseen.
- 9 January 2018
- Published by MDPI AG in Remote Sensing
- Vol. 10 (1) , 83
Open AccessThe Benefits of the Ka-Band as Evidenced from the SARAL/AltiKa Altimetric Mission: Quality Assessment and Unique Characteristics of AltiKa Data
The India-France SARAL/AltiKa mission is the first Ka-band altimetric mission dedicated to oceanography. The mission objectives are primarily the observation of the oceanic mesoscales but also include coastal oceanography, global and regional sea level monitoring, data assimilation, and operational oceanography. The mission ended its nominal phase after 3 years in orbit and began a new phase (drifting orbit) in July 2016. The objective of this paper is to provide a state of the art of the achievements of the SARAL/AltiKa mission in terms of quality assessment and unique characteristics of AltiKa data. It shows that the AltiKa data have similar accuracy at the centimeter level in term of absolute water level whatever the method (from local to global) and the type of water surfaces (ocean and lakes). It shows also that beyond the fact that AltiKa data quality meets the expectations and initial mission requirements, the unique characteristics of the altimeter and the Ka-band offer unique contributions in fields that were previously not fully foreseen.
- Open Access
- 14 July 2015
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 120 (8) , 5911-5939
Realizing a terrestrial reference frame using the Global Positioning System
We describe a terrestrial reference frame (TRF) realization based on Global Positioning System (GPS) data alone. Our approach rests on a highly dynamic, long‐arc (9 day) estimation strategy and on GPS satellite antenna calibrations derived from Gravity Recovery and Climate Experiment and TOPEX/Poseidon low Earth orbit receiver GPS data. Based on nearly 17 years of data (1997–2013), our solution for scale rate agrees with International Terrestrial Reference Frame (ITRF)2008 to 0.03 ppb yr−1, and our solution for 3‐D origin rate agrees with ITRF2008 to 0.4 mm yr−1. Absolute scale differs by 1.1 ppb (7 mm at the Earth's surface) and 3‐D origin by 8 mm. These differences lie within estimated error levels for the contemporary TRF.
- 14 July 2015
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 120 (8) , 5911-5939
Open AccessRealizing a terrestrial reference frame using the Global Positioning System
We describe a terrestrial reference frame (TRF) realization based on Global Positioning System (GPS) data alone. Our approach rests on a highly dynamic, long‐arc (9 day) estimation strategy and on GPS satellite antenna calibrations derived from Gravity Recovery and Climate Experiment and TOPEX/Poseidon low Earth orbit receiver GPS data. Based on nearly 17 years of data (1997–2013), our solution for scale rate agrees with International Terrestrial Reference Frame (ITRF)2008 to 0.03 ppb yr−1, and our solution for 3‐D origin rate agrees with ITRF2008 to 0.4 mm yr−1. Absolute scale differs by 1.1 ppb (7 mm at the Earth's surface) and 3‐D origin by 8 mm. These differences lie within estimated error levels for the contemporary TRF.
- 5 July 2010
- Published by Wiley
- p. 376-401
Observing Systems Needed to Address Sea‐Level Rise and Variability
- 5 July 2010
- Published by Wiley
- p. 376-401
Observing Systems Needed to Address Sea‐Level Rise and Variability