Paolo Gardoni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Paolo Gardoni has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
David Rosowsky
Zachry Department of Civil Engineering , Texas A&M University , College Station , TX , 77843-3136
3 shared publicationsJinquan Zhong
Zachry Department of Civil Engineering , Texas A&M University , College Station , TX , 77843-3136
2 shared publications- Jong-Wha Bai
Graduate Research Assistant, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX 77843-3136
2 shared publications - Mary Beth D. Hueste
Graduate Research Assistant, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX 77843-3136
2 shared publications Terje Haukaas
Doctoral Student, Zachry Dept. of Civil Engineering, Texas A&M Univ., College Station, TX 77843-3136
2 shared publicationsAnne Raich
Department of Civil and Environ. Engineering, Lafayette College, Easton, PA 18042
1 shared publication
Latest Publications
- 1 January 2012
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 8 (1) , 55-69
Seismic fragility estimates for corroding reinforced concrete bridges
Seismic fragility of reinforced concrete (RC) bridges is defined as the conditional probability that the seismic demand exceeds the corresponding capacity, specified for a certain performance level, for given seismic intensity measures. However, the structural properties of RC bridges change over time due to the onset of corrosion in the reinforcing steel. Therefore, seismic fragility of RC bridges changes during a bridge lifetime. This paper proposes a method to estimate the seismic fragility of corroding RC bridges. Structural capacities are defined using probabilistic models for deformation and shear capacities of RC columns. Probabilistic models are also used to estimate the corresponding demands for given seismic intensity measures. The capacity and demand models are then combined with probabilistic models for chloride-induced corrosion and time-dependent corrosion rate to model the dependency on time of the seismic fragility of RC bridges. In particular, the loss of reinforcing steel is modelled as a function of the thickness of the cover concrete for each reinforcing bar in the RC columns. The stiffness degradation in the cover concrete over time due to corrosion-induced cracking is also considered in the fragility estimates. Seismic fragility estimates are then formulated at the column, bent, and bridge levels. The fragility formulations properly incorporate the uncertainties in the capacity and demand models, and the inexactness (or model error) in modelling the material deterioration. The proposed method accounts for the variation of structural capacity and seismic demand over time due to the effects of corrosion in the reinforcing steel. As an application, seismic fragility estimates are developed for a corroding RC bridge with 11 two-column bents over a 100-year period.
- 1 January 2012
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 8 (1) , 55-69
Seismic fragility estimates for corroding reinforced concrete bridges
Seismic fragility of reinforced concrete (RC) bridges is defined as the conditional probability that the seismic demand exceeds the corresponding capacity, specified for a certain performance level, for given seismic intensity measures. However, the structural properties of RC bridges change over time due to the onset of corrosion in the reinforcing steel. Therefore, seismic fragility of RC bridges changes during a bridge lifetime. This paper proposes a method to estimate the seismic fragility of corroding RC bridges. Structural capacities are defined using probabilistic models for deformation and shear capacities of RC columns. Probabilistic models are also used to estimate the corresponding demands for given seismic intensity measures. The capacity and demand models are then combined with probabilistic models for chloride-induced corrosion and time-dependent corrosion rate to model the dependency on time of the seismic fragility of RC bridges. In particular, the loss of reinforcing steel is modelled as a function of the thickness of the cover concrete for each reinforcing bar in the RC columns. The stiffness degradation in the cover concrete over time due to corrosion-induced cracking is also considered in the fragility estimates. Seismic fragility estimates are then formulated at the column, bent, and bridge levels. The fragility formulations properly incorporate the uncertainties in the capacity and demand models, and the inexactness (or model error) in modelling the material deterioration. The proposed method accounts for the variation of structural capacity and seismic demand over time due to the effects of corrosion in the reinforcing steel. As an application, seismic fragility estimates are developed for a corroding RC bridge with 11 two-column bents over a 100-year period.
- 1 November 2011
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 7 (11) , 869-879
Seismic fragility increment functions for deteriorating reinforced concrete bridges
Fragility increment functions are developed to estimate the seismic fragility of reinforced concrete (RC) bridges subject to deterioration due to the onset and progression of corrosion of the reinforcement. For each mode of failure considered, the fragility at time t of a deteriorating bridge is obtained by multiplying the initial fragility of the undeteriorated bridge by a corresponding increment function expressed in terms of the environmental conditions, the original material properties, time, a measure of the seismic demand, and a set of unknown model parameters. The developed increment functions account for the effects on the fragility estimates of the loss of the reinforcement and of the increasing uncertainty over time. As an application, the developed increment functions are used to estimate the seismic fragility of an example RC bridge. The proposed fragility increment functions are useful to estimate the fragility of deteriorating bridges without any extra reliability analysis once the fragility of the undeteriorated bridge is known. In particular, the proposed fragility increment functions can be used to assess the time-variant fragility of bridges for applications such as reliability-based design, life-cycle cost analysis, and risk analysis.
- 1 November 2011
- Published by Taylor & Francis in Structure and Infrastructure Engineering
- Vol. 7 (11) , 869-879
Seismic fragility increment functions for deteriorating reinforced concrete bridges
Fragility increment functions are developed to estimate the seismic fragility of reinforced concrete (RC) bridges subject to deterioration due to the onset and progression of corrosion of the reinforcement. For each mode of failure considered, the fragility at time t of a deteriorating bridge is obtained by multiplying the initial fragility of the undeteriorated bridge by a corresponding increment function expressed in terms of the environmental conditions, the original material properties, time, a measure of the seismic demand, and a set of unknown model parameters. The developed increment functions account for the effects on the fragility estimates of the loss of the reinforcement and of the increasing uncertainty over time. As an application, the developed increment functions are used to estimate the seismic fragility of an example RC bridge. The proposed fragility increment functions are useful to estimate the fragility of deteriorating bridges without any extra reliability analysis once the fragility of the undeteriorated bridge is known. In particular, the proposed fragility increment functions can be used to assess the time-variant fragility of bridges for applications such as reliability-based design, life-cycle cost analysis, and risk analysis.
- 1 December 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 135 (12) , 1384-1392
Probabilistic Capacity Models and Fragility Estimates for Reinforced Concrete Columns Incorporating NDT Data
Knowing the ability of reinforced concrete (RC) bridges to withstand future seismic demands during their life-cycle can help bridge owners make rational decisions regarding optimal allocation of resources for maintenance, repair, and/or rehabilitation of bridge systems. The accuracy of a reliability assessment can be improved by incorporating information about the current aging and deterioration conditions of a bridge. Nondestructive testing (NDT) can be used to evaluate the actual conditions of a bridge, avoiding the use of deterioration models that bring additional uncertainties in the reliability assessment. This paper develops probabilistic deformation and shear capacity models for RC bridge columns that incorporate information obtained from NDT. The proposed models can be used when the flexural stiffness decays nonuniformly over a column height. The flexural stiffness of a column is estimated based on measured acceleration responses using a system identification method and the damage index method. As...
- 1 December 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 135 (12) , 1384-1392
Probabilistic Capacity Models and Fragility Estimates for Reinforced Concrete Columns Incorporating NDT Data
Knowing the ability of reinforced concrete (RC) bridges to withstand future seismic demands during their life-cycle can help bridge owners make rational decisions regarding optimal allocation of resources for maintenance, repair, and/or rehabilitation of bridge systems. The accuracy of a reliability assessment can be improved by incorporating information about the current aging and deterioration conditions of a bridge. Nondestructive testing (NDT) can be used to evaluate the actual conditions of a bridge, avoiding the use of deterioration models that bring additional uncertainties in the reliability assessment. This paper develops probabilistic deformation and shear capacity models for RC bridge columns that incorporate information obtained from NDT. The proposed models can be used when the flexural stiffness decays nonuniformly over a column height. The flexural stiffness of a column is estimated based on measured acceleration responses using a system identification method and the damage index method. As...
- 1 October 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 135 (10) , 1155-1163
Probabilistic Assessment of Structural Damage due to Earthquakes for Buildings in Mid-America
This paper provides an approach to conduct a probabilistic assessment of structural damage due to seismic events with an application to typical building structures in mid-America. The developed methodology includes modified damage state classifications based on the Applied Technology Council (ATC)-13 and ATC-38 damage states and the ATC-38 database of building damage. Damage factors are assigned to each damage state to quantify structural damage as a percentage of structural replacement cost. To account for the inherent uncertainties, these factors are expressed as random variables with a Beta distribution. A set of fragility curves, quantifying the structural vulnerability of a building, is mapped onto the developed methodology to determine the expected structural damage. The total structural damage factor for a given seismic intensity is then calculated using a probabilistic approach. Prediction and confidence bands are also constructed to account for the prevailing uncertainties. The expected seismic s...
- 1 October 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 135 (10) , 1155-1163
Probabilistic Assessment of Structural Damage due to Earthquakes for Buildings in Mid-America
This paper provides an approach to conduct a probabilistic assessment of structural damage due to seismic events with an application to typical building structures in mid-America. The developed methodology includes modified damage state classifications based on the Applied Technology Council (ATC)-13 and ATC-38 damage states and the ATC-38 database of building damage. Damage factors are assigned to each damage state to quantify structural damage as a percentage of structural replacement cost. To account for the inherent uncertainties, these factors are expressed as random variables with a Beta distribution. A set of fragility curves, quantifying the structural vulnerability of a building, is mapped onto the developed methodology to determine the expected structural damage. The total structural damage factor for a given seismic intensity is then calculated using a probabilistic approach. Prediction and confidence bands are also constructed to account for the prevailing uncertainties. The expected seismic s...
- 26 April 2009
- Published by American Society of Civil Engineers (ASCE)
- p. 1-9
Seismic Performance and Retrofit for Tilt-Up Concrete Buildings in Mid-America
Seismic risk is a concern in the Mid-America region because of the series of severe earthquakes that occurred in the New Madrid Seismic Zone in 1811–1812. Many existing concrete structures in this area are considered to be vulnerable in a moderate to significant seismic event because they were not designed for the seismic provisions of the current International Building Code. Seismic performance assessment and fragility analysis are used to evaluate the seismic vulnerability of existing structures. Based on these analyses, possible retrofit techniques are considered to reduce structural damage and corresponding losses. Based on available inventory data for Memphis, Tennessee, tilt-up concrete buildings are the most common type of concrete structure in Memphis. Tilt-up construction is commonly used for low-rise industrial buildings and has several advantages, including a large open space and low construction costs. However, many tilt-up concrete buildings were damaged during previous earthquakes in the Western U.S. and other regions. Typical damage included collapse of wall panels and roof diaphragms due connection failures. To improve seismic performance of tilt-up concrete buildings, several seismic retrofit techniques are currently used including the addition of anchors to strengthen the roof-to-wall connections.
- 26 April 2009
- Published by American Society of Civil Engineers (ASCE)
- p. 1-9
Seismic Performance and Retrofit for Tilt-Up Concrete Buildings in Mid-America
Seismic risk is a concern in the Mid-America region because of the series of severe earthquakes that occurred in the New Madrid Seismic Zone in 1811–1812. Many existing concrete structures in this area are considered to be vulnerable in a moderate to significant seismic event because they were not designed for the seismic provisions of the current International Building Code. Seismic performance assessment and fragility analysis are used to evaluate the seismic vulnerability of existing structures. Based on these analyses, possible retrofit techniques are considered to reduce structural damage and corresponding losses. Based on available inventory data for Memphis, Tennessee, tilt-up concrete buildings are the most common type of concrete structure in Memphis. Tilt-up construction is commonly used for low-rise industrial buildings and has several advantages, including a large open space and low construction costs. However, many tilt-up concrete buildings were damaged during previous earthquakes in the Western U.S. and other regions. Typical damage included collapse of wall panels and roof diaphragms due connection failures. To improve seismic performance of tilt-up concrete buildings, several seismic retrofit techniques are currently used including the addition of anchors to strengthen the roof-to-wall connections.
- 1 June 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 134 (6) , 495-504
Probabilistic Seismic Demand Models and Fragility Estimates for Reinforced Concrete Bridges with Two-Column Bents
Probabilistic models are developed to predict the deformation and shear demands due to seismic excitation on reinforced concrete (RC) columns in bridges with two-column bents. A Bayesian methodology is used to develop the models. The models are unbiased and properly account for the predominant uncertainties, including model errors, arising from a potentially inaccurate model form or missing variables, measurement errors, and statistical uncertainty. The probabilistic models developed are akin to deterministic demand models and procedures commonly used in practice, but they have additional correction terms that explicitly describe the inherent systematic and random errors. Through the use of a set of “explanatory” functions, terms that correct the bias in the existing deterministic demand models are identified. These explanatory functions provide insight into the underlying behavioral phenomena and provide a means to select ground motion parameters that are most relevant to the seismic demands. The approac...
- 1 June 2008
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 134 (6) , 495-504
Probabilistic Seismic Demand Models and Fragility Estimates for Reinforced Concrete Bridges with Two-Column Bents
Probabilistic models are developed to predict the deformation and shear demands due to seismic excitation on reinforced concrete (RC) columns in bridges with two-column bents. A Bayesian methodology is used to develop the models. The models are unbiased and properly account for the predominant uncertainties, including model errors, arising from a potentially inaccurate model form or missing variables, measurement errors, and statistical uncertainty. The probabilistic models developed are akin to deterministic demand models and procedures commonly used in practice, but they have additional correction terms that explicitly describe the inherent systematic and random errors. Through the use of a set of “explanatory” functions, terms that correct the bias in the existing deterministic demand models are identified. These explanatory functions provide insight into the underlying behavioral phenomena and provide a means to select ground motion parameters that are most relevant to the seismic demands. The approac...
- Open Access
- 1 May 2007
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 22 (4) , 282-292
Reliability‐Based Optimal Design of Electrical Transmission Towers Using Multi‐Objective Genetic Algorithms
- 1 May 2007
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 22 (4) , 282-292
Open AccessReliability‐Based Optimal Design of Electrical Transmission Towers Using Multi‐Objective Genetic Algorithms
- Open Access
- 1 April 2007
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 22 (3) , 182-196
A Probabilistic Framework for Bayesian Adaptive Forecasting of Project Progress
- 1 April 2007
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 22 (3) , 182-196
Open AccessA Probabilistic Framework for Bayesian Adaptive Forecasting of Project Progress