SSSezai Sen

Sezai Sen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sezai Sen has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Lean 5S + Safety and Work-Related Injuries in an Aluminum Casting Plant: A Five-Year Department-Stratified Analysis

    by İbrahim Şahin, Sezai Şen

    Lean 5S programs are widely promoted to improve occupational safety and health, but quantitative evaluations in metal casting are scarce. This study examined whether a Lean 5S + Safety program was associated with changes in injury outcomes in an aluminum casting plant. Safety records from 2021 to 2025 for production and shopfloor support workers included injuries, lost workdays, and person–hours. Injury frequency (IFR) and severity (SR) rates per 1,000,000 person–hours were computed, and multivariable Poisson regression with log(person–hours) offsets estimated incidence rate ratios (IRRs) comparing the program period (2022–2025) with the pre-implementation year (2021); negative binomial models were also fitted. Over 3.53 million person–hours, 170 lost-time injuries, and 1848 lost workdays were recorded, and the annual IFR declined from 68.2 to 29.3 per 1,000,000 person–hours. Across model specifications, the program period was associated with 30–40% lower injury rates and roughly halved lost workday rates versus baseline. Injuries and lost workdays were concentrated in foundry and machining, and young short-tenure workers and those with lower secondary education had the highest rates; exploratory analyses suggested a late-summer shift in injuries from day to evening and night shifts. Overall, this multi-component Lean 5S + Safety-centered occupational safety and health (OSH) improvement program was associated with improved safety performance, while residual risk remained concentrated in specific departments and worker groups.


  • Metal ve Alaşımlarda Toplam Karbon (C) ve Toplam Kükürt (S) Tayini, Metot Validasyonu ve Ölçüm Belirsizliği

    by Fatih Turan, Sezai Şen, Caner Tulgar, Ziya Çoban

    Ülkemiz, demir-çelik endüstrisi başta olmak üzere, metal hammadde ve uç ürünlerinin üretimi açısından dünya piyasasında büyük bir öneme sahiptir. Verimli ve yüksek kaliteye sahip bir üretim sürecinin gerçekleştirilebilmesi için malzemenin, tüm üretim süreci boyunca Karbon (C) ve Kükürt (S) konsantrasyonlarının sürekli izlenmesi gerekmektedir. Söz konusu ürünlerin pazarlanması aşamasında da, malzeme niteliklerinin uygunluk değerlendirme kuruluşları tarafından raporlanması gerekmektedir. Bu aşamada ürünlerin kalite kontrol testlerinde, ölçüm sonuçlarının doğruluğunun arttırılması ve güvenilirliğinin sağlanması beklenmektedir. Bu amaçla, uygunluk değerlendirme kuruluşları tarafından gerçekleştirilen testlerde öncelikle uygulanan analiz metodunun doğrulanması ve geçerli kılınması sağlanmalıdır. Ancak bu konuda ilgili uluslararası kılavuzlarda açıklanan prosedürlerin dışında kalan farklı uygulamaların olduğu gözlenmektedir. Bu çalışmada, mevcut en iyi tekniklere örnek olarak, metal ve alaşımlarda toplam karbon (C) ve toplam kükürt (S) analizleri için " TS EN ISO/IEC 17025 Deney ve Kalibrasyon Laboratuvarlarının Yeterliliği İçin Genel Gereklilikler " standardında açıklanan prosedürler izlenerek yöntem doğrulama ve belirsizlik tahmini çalışmaları yapılmıştır.

  • Demir Cevheri Analizleri İçin Referans Malzeme Üretim Sürecinde Toplam Demir (Fe) Miktarı Tayini Metot Validasyon Ve Ölçüm Belirsizliğinin Tahmin Edilmesi

    by Fatih Turan, Sezai Şen

    ISO 17025 standardına göre, deney sonuçlarının geçerliliğinin güvence altına alınması için yetkin üreticiler tarafından üretilen sertifikalı referans malzeme (CRM) kullanımı gerekmektedir. Cevher referans malzemeleri, üretimi yapılan cevherler için gerçekleştirilen kalite kontrol çalışmalarında, kalibrasyon, metot geliştirme, metot validasyonu, metrolojik izlenebilirlik sağlama, analist ya da cihazın performansının ölçülmesi gibi birçok farklı amaç için kullanılabilen, matris yapıda, belirli özelliklere göre kararlı ve homojen malzemelerdir. Ülkemizin sahip olduğu demir rezervleri, hammadde ve buna bağlı uç ürünlerin üretimi açısından dünya piyasasındaki rekabet ortamında büyük bir öneme sahiptir. Söz konusu cevherlere uygulanan kalite kontrol testlerinde, ölçüm sonuçlarının doğruluğunun arttırılması ve güvenilirliğinin sağlanması amacıyla akredite laboratuvarlar tarafından analizler gerçekleştirilmektedir. Bu çalışmada, TS EN ISO 17034: Referans malzeme üreticilerinin yeterliliği için genel şartlar standardı çerçevesinde, ülkemiz demir cevherlerinden üretilecek olan Sertifikalı Referans Malzeme (CRM) için gerçekleştirilmesi düşünülen metot validasyon aşamaları incelenmiştir. DEÜ Maden Mühendisliği Bölümü Kimya Laboratuvarı'nda yapılan analiz yönteminin valide edilmesi ve yapısında yüksek demir (Fe) bulunan demir cevheri ve konsantrelerinde ölçüm belirsizliğinin tahmin edilmesi amaçlanmaktadır. According to the ISO 17025 standard, the use of certified reference material (CRM) produced by competent manufacturers is required to ensure the validity of the test results. Ore reference materials are stable and homogeneous materials in matrix structure according to certain properties, which can be used for many different purposes such as calibration, method development, method validation, metrological traceability, measurement of analyst or device performance in quality control studies for the ores produced. The iron reserves of our country have a great importance in the competitive environment in the world market in terms of the production of raw materials and related end products. In the quality control tests applied to the said ores, analyzes are carried out by accredited laboratories in order to increase the accuracy and reliability of the measurement results. In this study, within the framework of TS EN ISO 17034: General requirements for the competence of reference material producers", the method validation stages that are thought to be carried out for the Certified Reference Material (CRM) to be produced from the iron ores of our country were examined. It is aimed to validate the analysis method and to estimate the measurement uncertainty in iron ore and concentrates containing high iron (Fe) in their structure, carried out in the Chemistry Laboratory of the DEU Mining Engineering Department.


  • The Effects of Various Flotation Parameters on Gold Recovery by Coal-Oil Assisted Gold Flotation

    by S. Sen, G. Akar, Y. Cilingir, U. Malayoglu, M. Tanriverdi, U. Ipekoglu

    The effects of different physical parameters such as pulp density, aeration conditions, and impeller speed on the performance of coal-oil assisted gold flotation were investigated in this study. The experiments were conducted using samples taken from an epithermal gold ore deposit. The results demonstrated that increasing the solid concentration in feed pulp slightly improves recovery of gold particles, but accompanied by significant decreases in concentrate grade. At low aeration conditions gold recovery was relatively low whereas at high aeration conditions the selectivity was poor. The use of higher level of agitation in the agglomerate re-formation stage brought about an increase in gold recovery; however, gold grade of the concentrates tended to decline. Gold grade of the concentrate was significantly increased by reloading of the coal oil agglomerates; on the other hand, substantial decreases were observed in total gold recovery after each successive cycle.


  • Parametric Evaluation of Coal Comminution by Waterjets

    by Greg Galecki, Sezai Sen, Gul Akar, Yaqing Li

    In this study, comminution of coal with waterjets was performed to determine the factors that influence the particle size reduction. To carry out these experiments, a bituminous coal sample with an ash value of 31% was exposed to waterjet action within a conventional abrasive cutting head coupled with a specially designed cavitation chamber. Original coal feed of 371 µm volume mean diameter and its subsamples of 59, 172, 323, and 527 µm were used to investigate the effect of pressure on particle size reduction. For the purpose of this study, the comminution system was operated at 69, 138, 207, and 276 MPa. Physical properties such as particle size distribution and volume mean diameter were used for evaluation of the efficiency of comminution. Initial feed size was found as a dominant factor affecting the degree of size reduction. The increase in the cavitation system operating pressure resulted in finer products. Scanning electron microscopy studies of particle shape and morphology indicated transition from flaky to round and blocky particle shapes as a result of pressure increase. Severe clay dispersion was associated with all test conditions.


  • Open Access

    Gold recovery by KC from grinding circuit of Bergama CIP plant

    by Sezai Sen

    Numerous research studies have been done to improve the gold recovery methods and to fi nd alternative processing techniques in the last decade. The main goal in this search has become to design an effi cient plant employing environmentally acceptable processes today. For this purpose, the application of environmentally friendly, no chemical included techniques like centrifugal gravity separators are preferably used in gold recovery plants prior to or in place of cyanidation. In this study, the recovery of the gold particles accumulated in the grinding circuit of a CIP plant was investigated by using Knelson centrifugal separator. A KC-MD7.5 Knelson concentrator was installed in the grinding circuit of Bergama/Ovacik CIP plant. The concentrator was operated while the Mastra gold ore cyanidation tests were running on the plant.