Ana Maria Maliska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ana Maria Maliska has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Aloisio Nelmo Klein
LabMat (Materials Laboratory) Department of Mechanical Engineering Federal University of Santa Catarina Florianópolis 88040‐370 Brazil
2 shared publications - Paulo César Borges
Department of Mechanical Engineering, Federal University of Technology–Paraná, Campus Ecoville, Curitiba 81280-340, PR, Brazil
2 shared publications - Ricardo Fernando dos Reis
Universidade Tecnológica Federal do Paraná, Brasil
2 shared publications Cristiano Binder
1 shared publicationFrancisco Cavilha Neto
1 shared publicationJoel Louis Rene Muzart
Universidade Federal de Santa Catarina, Brazil
1 shared publication
Latest Publications
- 1 October 2018
- Published by Editora Edgard Blucher, Ltda.
- p. 1283-1290
TRATAMENTOS TERMOQUÍMICOS DE SUPERFÍCIE POR PLASMA NO AÇO AISI 1005
- 1 October 2018
- Published by Editora Edgard Blucher, Ltda.
- p. 1283-1290
TRATAMENTOS TERMOQUÍMICOS DE SUPERFÍCIE POR PLASMA NO AÇO AISI 1005
- 27 August 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 46 (3) , 846-854
Nitrogen surface enrichment of austenitic stainless steel ISO 5832-1
- 27 August 2010
- Published by Springer Nature in Journal of Materials Science
- Vol. 46 (3) , 846-854
Nitrogen surface enrichment of austenitic stainless steel ISO 5832-1
- Open Access
- 1 June 2008
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 13 (2) , 304-315
Nitretação à plasma do aço inoxidável austenítico ISO 5832-1: influência do tempo de tratamento
Corpos de prova de aço inoxidável ISO 5832-1 foram nitretados em uma atmosfera de 90% vol. N2 e 10% vol. H2, a uma temperatura de 630º C. Os tempos de processamento estudados foram 1, 3 e 5 h. Utilizaram-se as seguintes técnicas de análise: difração de raios-x (DRX), microscopia eletrônica de varredura (MEV) e microdureza Vickers, além da análise da variação de massa. Os resultados evidenciaram o crescimento não difusivo da camada de compostos. O aumento do tempo, de 1 para 3 h, promove uma maior incorporação de nitrogênio na superfície do material promovendo a formação de fases mais ricas nesse elemento. Promove também o aumento da dureza e do ganho de massa, bem como crescimento da camada nitretada. Os processamentos realizados por 3 e 5 h apresentam resultados similares. Isto se deve à formação de uma camada superficial rica em nitretos que dificulta a entrada do nitrogênio para o interior da amostra.
- 1 June 2008
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 13 (2) , 304-315
Open AccessNitretação à plasma do aço inoxidável austenítico ISO 5832-1: influência do tempo de tratamento
Corpos de prova de aço inoxidável ISO 5832-1 foram nitretados em uma atmosfera de 90% vol. N2 e 10% vol. H2, a uma temperatura de 630º C. Os tempos de processamento estudados foram 1, 3 e 5 h. Utilizaram-se as seguintes técnicas de análise: difração de raios-x (DRX), microscopia eletrônica de varredura (MEV) e microdureza Vickers, além da análise da variação de massa. Os resultados evidenciaram o crescimento não difusivo da camada de compostos. O aumento do tempo, de 1 para 3 h, promove uma maior incorporação de nitrogênio na superfície do material promovendo a formação de fases mais ricas nesse elemento. Promove também o aumento da dureza e do ganho de massa, bem como crescimento da camada nitretada. Os processamentos realizados por 3 e 5 h apresentam resultados similares. Isto se deve à formação de uma camada superficial rica em nitretos que dificulta a entrada do nitrogênio para o interior da amostra.
- Open Access
- 1 June 2004
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 7 (2) , 269-275
Plasma sintering of unalloyed iron: a study of surface porosity
Samples of unalloyed iron powder were compacted and sintered in an abnormal glow discharge, generated in a gas mixture of 80% Ar + 20% H2 by using a pulsed power source. The samples were placed on a holder, acting as the discharge cathode, and were heated by the bombardment of ions, strongly accelerated in the cathode sheath. Sintering was performed at temperatures of 1173, 1273 and 1373 K for 30 min, varying the voltage applied to the cathode from 400 to 700 V and pressure ranging from 470 to 2650 Pa. It is shown that the kinetic energy of ions striking the sample surface increased approximately three times, when the voltage changed from 400 to 700 V, with a corresponding reduction of surface porosity. The surface sealing is related to the ion bombardment, which produced a high mobility of surface atoms and consequent enhanced diffusion as well as sputtering and condensation on the concave surface, resulting in an activation of surface sintering.
- 1 June 2004
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 7 (2) , 269-275
Open AccessPlasma sintering of unalloyed iron: a study of surface porosity
Samples of unalloyed iron powder were compacted and sintered in an abnormal glow discharge, generated in a gas mixture of 80% Ar + 20% H2 by using a pulsed power source. The samples were placed on a holder, acting as the discharge cathode, and were heated by the bombardment of ions, strongly accelerated in the cathode sheath. Sintering was performed at temperatures of 1173, 1273 and 1373 K for 30 min, varying the voltage applied to the cathode from 400 to 700 V and pressure ranging from 470 to 2650 Pa. It is shown that the kinetic energy of ions striking the sample surface increased approximately three times, when the voltage changed from 400 to 700 V, with a corresponding reduction of surface porosity. The surface sealing is related to the ion bombardment, which produced a high mobility of surface atoms and consequent enhanced diffusion as well as sputtering and condensation on the concave surface, resulting in an activation of surface sintering.