Vânya M. D. Pasa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vânya M. D. Pasa has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Choyu Otani
Departamento de Física, Instituto de Tecnologia Aeronáutica, Centro Técnico Aeroespacial, São José dos Campos, Brazil, CEP: 12228 901
2 shared publications- Marcos Juliano Prauchner
Institute of Chemistry, University of Brasilia, Campus Darcy Ribeiro, Brasilia 70904-970, DF, Brazil
2 shared publications Satika Otani
Departamento de Física, Instituto de Tecnologia Aeronáutica, Centro Técnico Aeroespacial, São José dos Campos, Brazil, CEP: 12228 901
2 shared publicationsBreno N. Melo
Departamento de Química da UFMG, Instituto de Ciências Exatas, Av. Antônio Carlos 6627, Pampulha, CEP 31270-90, Belo Horizonte, Brazil
1 shared publicationSonia M. C. de Menezes
DIQUIM/CENPES/PETROBRAS, Ilha do Fundão, Q-7, Rio de Janeiro-RJ, Brazil, CEP: 21949 900
1 shared publication
Latest Publications
- 5 December 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 91 (3) , 1604-1611
Eucalyptus tar pitch pretreatment for carbon material processing
Eucalyptus tar pitches are generated on a large scale in Brazil as byproducts of the charcoal manufacturing industry. They have a macromolecular structure consisting mainly of phenolic, guaiacylic, and siringylic units substituted and interlinked by aliphatic side chains rich in oxygenated polar groups (such as alcohol, ether, carbonyl, and carboxyl), similar to lignin. Under treatment around 250°C, the pitches undergo polymerization. C—O links are broken up, and, while side chains are released, the heavier fragments rich in aromatic rings react to form larger molecules. The presence of AlCl3 and CH2O makes polymerization at lower temperatures (150°C and 100°C, respectively) possible. AlCl3 acts as a Lewis acid, complexing to oxygen atoms and weakening C—O bonds. In turn, CH2O acts as a polymerizing agent, as in the preparation of resol phenolic resins. These pretreatments have made it possible to adjust the softening point in order to yield spinnable pitches susceptible to post spinning thermal stabilization, besides yielding pitches with improved thermal stability. These possibilities are important because they make Eucalyptus tar pitches potential carbon fiber precursors. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1604–1611, 2004
- 5 December 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 91 (3) , 1604-1611
Eucalyptus tar pitch pretreatment for carbon material processing
Eucalyptus tar pitches are generated on a large scale in Brazil as byproducts of the charcoal manufacturing industry. They have a macromolecular structure consisting mainly of phenolic, guaiacylic, and siringylic units substituted and interlinked by aliphatic side chains rich in oxygenated polar groups (such as alcohol, ether, carbonyl, and carboxyl), similar to lignin. Under treatment around 250°C, the pitches undergo polymerization. C—O links are broken up, and, while side chains are released, the heavier fragments rich in aromatic rings react to form larger molecules. The presence of AlCl3 and CH2O makes polymerization at lower temperatures (150°C and 100°C, respectively) possible. AlCl3 acts as a Lewis acid, complexing to oxygen atoms and weakening C—O bonds. In turn, CH2O acts as a polymerizing agent, as in the preparation of resol phenolic resins. These pretreatments have made it possible to adjust the softening point in order to yield spinnable pitches susceptible to post spinning thermal stabilization, besides yielding pitches with improved thermal stability. These possibilities are important because they make Eucalyptus tar pitches potential carbon fiber precursors. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1604–1611, 2004
- 18 July 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 89 (14) , 3797-3802
Composites based on eucalyptus tar pitch/castor oil polyurethane and short sisal fibers
Polymeric materials are being developed with renewable resources to promote industrial progress with environmentally friendly technologies. For this reason, polyurethane samples were prepared with 4,4′‐diphenylmethane diisocyanate (NCO/OH = 1), eucalyptus tar pitch (biopitch), castor oil as a polyol, and dibutyltin dilaurate as a catalyst. These materials were reinforced with different contents of short sisal fibers (0, 2.5, 5.0, 7.5, and 10.0%) and were prepared by resin‐transfer molding. The composites were characterized by IR absorption spectroscopy, thermal analysis (thermogravimetry and differential scanning calorimetry), impact resistance, scanning electron microscopy, and water absorption resistance. These materials showed hydrophobic characteristics, despite the addition of sisal fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3797–3802, 2003
- 18 July 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 89 (14) , 3797-3802
Composites based on eucalyptus tar pitch/castor oil polyurethane and short sisal fibers
Polymeric materials are being developed with renewable resources to promote industrial progress with environmentally friendly technologies. For this reason, polyurethane samples were prepared with 4,4′‐diphenylmethane diisocyanate (NCO/OH = 1), eucalyptus tar pitch (biopitch), castor oil as a polyol, and dibutyltin dilaurate as a catalyst. These materials were reinforced with different contents of short sisal fibers (0, 2.5, 5.0, 7.5, and 10.0%) and were prepared by resin‐transfer molding. The composites were characterized by IR absorption spectroscopy, thermal analysis (thermogravimetry and differential scanning calorimetry), impact resistance, scanning electron microscopy, and water absorption resistance. These materials showed hydrophobic characteristics, despite the addition of sisal fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3797–3802, 2003
- 14 February 2002
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 84 (5) , 900-908
Rheological study of eucalyptus tar pitches
The development of advanced carbonaceous materials (ACMs) from biopitches is important to increase the revenue of the charcoal making industry and to stimulate the use of biomass, thereby attending to the appeals for environmental preservation. A pioneer study on the rheological behavior of eucalyptus tar pitches was carried out in this work. This behavior plays an important part in obtaining ACMs from pitch, particularly in the spinning step of carbon fiber production. Our results showed that biopitches have a strong dependence on the viscosity and temperature/softening point ratio. An Arrhenius‐type law gave the activation energies for viscous flow. Different from conventional polymers, this energy was higher for more polymerized pitches because of their higher molecular stiffness. The results obtained by the Williams–Landel–Ferry equation showed that the viscosity can be associated with the free volume. Lower viscosities correspond to larger free volume. The plot of the apparent viscosity versus the shear time at constant temperature and shear rate showed that the pitches have a purely viscous flow. Experiments that changed the shear rate showed that biopitches behave as Newtonian fluids. Purely viscous and Newtonian behaviors are desirable for more stable spinning. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 900–908, 2002; DOI 10.1002/app.10096
- 14 February 2002
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 84 (5) , 900-908
Rheological study of eucalyptus tar pitches
The development of advanced carbonaceous materials (ACMs) from biopitches is important to increase the revenue of the charcoal making industry and to stimulate the use of biomass, thereby attending to the appeals for environmental preservation. A pioneer study on the rheological behavior of eucalyptus tar pitches was carried out in this work. This behavior plays an important part in obtaining ACMs from pitch, particularly in the spinning step of carbon fiber production. Our results showed that biopitches have a strong dependence on the viscosity and temperature/softening point ratio. An Arrhenius‐type law gave the activation energies for viscous flow. Different from conventional polymers, this energy was higher for more polymerized pitches because of their higher molecular stiffness. The results obtained by the Williams–Landel–Ferry equation showed that the viscosity can be associated with the free volume. Lower viscosities correspond to larger free volume. The plot of the apparent viscosity versus the shear time at constant temperature and shear rate showed that the pitches have a purely viscous flow. Experiments that changed the shear rate showed that biopitches behave as Newtonian fluids. Purely viscous and Newtonian behaviors are desirable for more stable spinning. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 900–908, 2002; DOI 10.1002/app.10096