Tapan K. Sarkar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tapan K. Sarkar has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Magdalena Salazar-Palma
Carlos III University of Madrid, Avda. de la Universidad 30, 28911 Leganés, Madrid, Spain
12 shared publications Y. Hua
Dept. of Electr. & Comput. Eng., Syracuse Univ., NY, USA
4 shared publicationsJinhwan Koh
3 shared publications- Baek-Ho Jung
Department of Information and Communication Engineering, Hoseo University, Asan, Chungnam 336-795, Korea
2 shared publications - Mengtao Yuan
Dept. of Electr. Eng. & Comput. Sci., Syracuse Univ., NY, USA
2 shared publications A. De
Dept. of Electr. Eng. & Comput. Sci., Syracuse Univ., NY, USA
1 shared publication
Latest Publications
- 31 January 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 59 (4) , 1432-1436
The Design of an Ultrawideband T-Pulse With a Linear Phase Fitting the FCC Mask
A discrete finite time domain pulse is designed under the constraint of the Federal Communications Commission (FCC) ultrawideband (UWB) spectral mask. This pulse also enjoys the advantage of having a linear phase over the frequency band of interest and is orthogonal to its shifted version of one or more baud time. The finite time pulse is designed by an optimization method and concentrates its energy in the allowed bands specified by the FCC. Finally, an example is presented to illustrate how these types of wideband pulses can be transmitted and received with little distortion.
- 31 January 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 59 (4) , 1432-1436
The Design of an Ultrawideband T-Pulse With a Linear Phase Fitting the FCC Mask
A discrete finite time domain pulse is designed under the constraint of the Federal Communications Commission (FCC) ultrawideband (UWB) spectral mask. This pulse also enjoys the advantage of having a linear phase over the frequency band of interest and is orthogonal to its shifted version of one or more baud time. The finite time pulse is designed by an optimization method and concentrates its energy in the allowed bands specified by the FCC. Finally, an example is presented to illustrate how these types of wideband pulses can be transmitted and received with little distortion.
- 15 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 51 (1) , 164-166
Reply by the Authors (for “A Look at the Concept of Channel Capacity from a Maxwellian Viewpoint”)
Let us begin by stating that it is difficult to provide an adequate response that will enlighten the audience if the correspondent neither provides the necessary references nor the details of his computations that are in disagreement with the authors. Since science is evidence based, it is difficult to respond intelligently where evidence of a disagreement is missing. We will respond to Dr. Kimber's comments by addressing each paragraph separately.
- 15 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Propagation Magazine
- Vol. 51 (1) , 164-166
Reply by the Authors (for “A Look at the Concept of Channel Capacity from a Maxwellian Viewpoint”)
Let us begin by stating that it is difficult to provide an adequate response that will enlighten the audience if the correspondent neither provides the necessary references nor the details of his computations that are in disagreement with the authors. Since science is evidence based, it is difficult to respond intelligently where evidence of a disagreement is missing. We will respond to Dr. Kimber's comments by addressing each paragraph separately.
- 19 June 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 54 (6) , 2552-2563
Conditions for generation of stable and accurate hybrid TD-FD MoM solutions
Broadband characterization of any electromagnetic (EM) data (e.g., surface currents, radiation pattern, and network parameters) can be carried out using partial information in the time domain (TD) and the frequency domain (FD). In this hybrid TD-FD approach, one generates the early time response using a TD code at a spatial location and uses a FD code to generate the low-frequency response at the same place. Then, the partial complementary information in both the TD and FD is fit by a set of orthogonal functions and its Fourier transform having the same expansion coefficients. Three different types of functions, namely, Hermite, Bessel-Chebyshev, and Laguerre, have been used for extrapolation. Once the expansion coefficients for these functions are known, the response can be extrapolated either for late times or high frequencies using the initial partial information. The objective of this paper is to explore the conditions under which this hybrid approach yields a stable and accurate solution. We investigate bounds for both the number of orthogonal functions needed to carry out the extrapolation and the scale factors needed to accurately fit the data in time and in frequency. Numerical examples have been presented to illustrate the efficacy of these bounds. It is important to point out that, in this hybrid approach of extrapolation, we are not creating new information but processing the available information in an intelligent fashion
- 19 June 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 54 (6) , 2552-2563
Conditions for generation of stable and accurate hybrid TD-FD MoM solutions
Broadband characterization of any electromagnetic (EM) data (e.g., surface currents, radiation pattern, and network parameters) can be carried out using partial information in the time domain (TD) and the frequency domain (FD). In this hybrid TD-FD approach, one generates the early time response using a TD code at a spatial location and uses a FD code to generate the low-frequency response at the same place. Then, the partial complementary information in both the TD and FD is fit by a set of orthogonal functions and its Fourier transform having the same expansion coefficients. Three different types of functions, namely, Hermite, Bessel-Chebyshev, and Laguerre, have been used for extrapolation. Once the expansion coefficients for these functions are known, the response can be extrapolated either for late times or high frequencies using the initial partial information. The objective of this paper is to explore the conditions under which this hybrid approach yields a stable and accurate solution. We investigate bounds for both the number of orthogonal functions needed to carry out the extrapolation and the scale factors needed to accurately fit the data in time and in frequency. Numerical examples have been presented to illustrate the efficacy of these bounds. It is important to point out that, in this hybrid approach of extrapolation, we are not creating new information but processing the available information in an intelligent fashion
- 7 February 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 53 (2) , 833-841
Reconstructing a nonminimum phase response from the far-field power pattern of an electromagnetic system
A new technique for reconstructing the nonminimum phase function from magnitude-only data is presented in this paper. The nonminimum phase function is reconstructed by utilizing the fact that the discrete Fourier transform of the far field power pattern is equal to the autocorrelation of the equivalent spatial current distribution on the electromagnetic structure. An all-pass filter representation is also used to reduce the computational load in computing the nonminimum phase function. The solution for the phase is not unique but is up to a linear phase delay between the actual phase function and the phase produced by the current approach. However, we generate a solution which has a spatially causal response, as the antennas are all finite in size. This approach is applied to the synthesis of nonminimum phase functions from the magnitude only antenna pattern. Several examples dealing with single antennas and antenna arrays have been simulated to illustrate the applicability of this approach.
- 7 February 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 53 (2) , 833-841
Reconstructing a nonminimum phase response from the far-field power pattern of an electromagnetic system
A new technique for reconstructing the nonminimum phase function from magnitude-only data is presented in this paper. The nonminimum phase function is reconstructed by utilizing the fact that the discrete Fourier transform of the far field power pattern is equal to the autocorrelation of the equivalent spatial current distribution on the electromagnetic structure. An all-pass filter representation is also used to reduce the computational load in computing the nonminimum phase function. The solution for the phase is not unique but is up to a linear phase delay between the actual phase function and the phase produced by the current approach. However, we generate a solution which has a spatially causal response, as the antennas are all finite in size. This approach is applied to the synthesis of nonminimum phase functions from the magnitude only antenna pattern. Several examples dealing with single antennas and antenna arrays have been simulated to illustrate the applicability of this approach.
- 28 September 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Phased arrays operating in a near field environment
An adaptive methodology is presented that not only can deal with realistic antenna elements operating in a real environment, but also can handle the effects of mutual coupling between the antenna elements. In addition, one can incorporate in this methodology the effects of near field scatterers and use of dissimilar antenna elements in the array. The analysis is carried out using a dynamic electromagnetic analysis tool. In addition, an array transformation technique is used to mitigate the various complex electromagnetic effects in a non-uniformly spaced non-planar array in the presence of mutual coupling and the problem is transformed to that of a virtual linear array of uniformly spaced isotropic point radiators operating in free space. The preprocessed data from the interpolated virtual array is analyzed using a direct data domain least squares approach utilizing a single snapshot of data to estimate the strength of the signal of interest arriving from a known direction in the presence of coherent strong jammers, clutter and thermal noise. In addition, this methodology is quite amenable to real time processing.
- 28 September 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Phased arrays operating in a near field environment
An adaptive methodology is presented that not only can deal with realistic antenna elements operating in a real environment, but also can handle the effects of mutual coupling between the antenna elements. In addition, one can incorporate in this methodology the effects of near field scatterers and use of dissimilar antenna elements in the array. The analysis is carried out using a dynamic electromagnetic analysis tool. In addition, an array transformation technique is used to mitigate the various complex electromagnetic effects in a non-uniformly spaced non-planar array in the presence of mutual coupling and the problem is transformed to that of a virtual linear array of uniformly spaced isotropic point radiators operating in free space. The preprocessed data from the interpolated virtual array is analyzed using a direct data domain least squares approach utilizing a single snapshot of data to estimate the strength of the signal of interest arriving from a known direction in the presence of coherent strong jammers, clutter and thermal noise. In addition, this methodology is quite amenable to real time processing.
- 12 July 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 52 (7) , 1740-1750
Use of discrete Laguerre sequences to extrapolate wide-band response from early-time and low-frequency data
Extrapolation of wide-band response using early-time and low-frequency data has been accomplished by the use of the orthogonal polynomials, such as Laguerre polynomials, Hermite polynomials, and Bessel-Chebyshev functions. It is a good approach to reduce the computational loads and obtain stable results for computation intensive electromagnetic analysis. However, all the orthonormal basis functions that have been used are all continuous or analog functions, which means we have to sample the polynomials both in time and frequency domains before we can use them to carry out the extrapolation. The process of sampling will introduce some errors, especially for high degrees or small scaling factors and, hence, may destroy the orthogonality between the polynomials of various degrees in a discrete sense. In this paper, we introduce the discrete Laguerre functions, which are directly derived using the Z transform and, thus, are exactly orthonormal in a discrete sense. The discrete Laguerre polynomials are fundamentally different from its continuous counterparts, except asymptotically when the sampling interval approaches zero. The other advantage of using these discrete orthonormal functions is that they do not give rise to the Gibbs phenomenon unlike its continuous counterpart. Using it in the extrapolation, the range or convergence can be extended both for the scaling factor and order of expansion, and at the same time, the quality of performance can be improved. Since the error of extrapolation is sensitive to the scaling factor, an efficient way to estimate the error as a function of the scaling factor is explained and its feasibility for any problem is validated by numerical examples of antennas.
- 12 July 2004
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 52 (7) , 1740-1750
Use of discrete Laguerre sequences to extrapolate wide-band response from early-time and low-frequency data
Extrapolation of wide-band response using early-time and low-frequency data has been accomplished by the use of the orthogonal polynomials, such as Laguerre polynomials, Hermite polynomials, and Bessel-Chebyshev functions. It is a good approach to reduce the computational loads and obtain stable results for computation intensive electromagnetic analysis. However, all the orthonormal basis functions that have been used are all continuous or analog functions, which means we have to sample the polynomials both in time and frequency domains before we can use them to carry out the extrapolation. The process of sampling will introduce some errors, especially for high degrees or small scaling factors and, hence, may destroy the orthogonality between the polynomials of various degrees in a discrete sense. In this paper, we introduce the discrete Laguerre functions, which are directly derived using the Z transform and, thus, are exactly orthonormal in a discrete sense. The discrete Laguerre polynomials are fundamentally different from its continuous counterparts, except asymptotically when the sampling interval approaches zero. The other advantage of using these discrete orthonormal functions is that they do not give rise to the Gibbs phenomenon unlike its continuous counterpart. Using it in the extrapolation, the range or convergence can be extended both for the scaling factor and order of expansion, and at the same time, the quality of performance can be improved. Since the error of extrapolation is sensitive to the scaling factor, an efficient way to estimate the error as a function of the scaling factor is explained and its feasibility for any problem is validated by numerical examples of antennas.
- 1 January 2004
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 18 (7) , 939-956
A Novel Hybrid FEM High-frequency Technique For The Analysis of Scattering and Radiation Problems
A novel hybrid Finite Element Method and High Frequency Technique for the efficient analysis of scattering and radiation problems is presented. Results of the analysis of two-dimensional scattering and radiation problems using Physical Optics as the high frequency technique are given showing some of the features of the method.
- 1 January 2004
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 18 (7) , 939-956
A Novel Hybrid FEM High-frequency Technique For The Analysis of Scattering and Radiation Problems
A novel hybrid Finite Element Method and High Frequency Technique for the efficient analysis of scattering and radiation problems is presented. Results of the analysis of two-dimensional scattering and radiation problems using Physical Optics as the high frequency technique are given showing some of the features of the method.
- 6 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Subspace linear prediction approach to extracting poles
It is shown that the conventional linear prediction (LP) methods (including various versions of the Prony method) and the matrix pencil method for extracting poles of data sequences can be unified under a generalized approach called the subspace linear prediction (SLP) approach. The conventional LP methods can be considered as high-order SLP methods, while the matrix pencil method is a first-order SLP method. The authors also discuss a special form of the matrix pencil method for oversampled data. It is observed that, for oversampled data, the noise sensitivity of the least-square Prony method can be significantly improved without using singular value decomposition or other subspace decomposition algorithms.
- 6 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Subspace linear prediction approach to extracting poles
It is shown that the conventional linear prediction (LP) methods (including various versions of the Prony method) and the matrix pencil method for extracting poles of data sequences can be unified under a generalized approach called the subspace linear prediction (SLP) approach. The conventional LP methods can be considered as high-order SLP methods, while the matrix pencil method is a first-order SLP method. The authors also discuss a special form of the matrix pencil method for oversampled data. It is observed that, for oversampled data, the noise sensitivity of the least-square Prony method can be significantly improved without using singular value decomposition or other subspace decomposition algorithms.
- 6 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
A discussion of E-pulse method and Prony's method for radar target resonance retrieval from scattered field
The E-pulse method is discussed and refined in the context of radar target pole retrieval from scattered field. Its relation to Prony's method is investigated. It is shown that the E-pulse method can be viewed as a smoothing and sampling procedure and a Prony's approach. The tradeoff between noise insensitivity and computation burden influenced by various parameters is pointed out.
- 6 January 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
A discussion of E-pulse method and Prony's method for radar target resonance retrieval from scattered field
The E-pulse method is discussed and refined in the context of radar target pole retrieval from scattered field. Its relation to Prony's method is investigated. It is shown that the E-pulse method can be viewed as a smoothing and sampling procedure and a Prony's approach. The tradeoff between noise insensitivity and computation burden influenced by various parameters is pointed out.