Ala Khodier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ala Khodier has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
John Oakey
Energy Technology Centre, School of Applied Sciences, Cranfield University, Cranfield, Bedfordshire MK43 0AL, United Kingdom
1 shared publicationNigel Legrave
Energy Technology Centre, School of Applied Sciences, Cranfield University, Cranfield, Bedfordshire MK43 0AL, United Kingdom
1 shared publicationNigel Simms
Energy Technology Centre, School of Applied Sciences, Cranfield University, Cranfield, Bedfordshire MK43 0AL, United Kingdom
1 shared publicationPaul Kilgallon
Energy Technology Centre, School of Applied Sciences, Cranfield University, Cranfield, Bedfordshire MK43 0AL, United Kingdom
1 shared publication- Tony Bridgwater
School of Engineering and Applied Science, Aston University, Aston Triangle, Birmingham B4 7ET, United Kingdom
1 shared publication
Latest Publications
- 12 August 2009
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 28 (3) , 397-403
Pilot‐scale combustion of fast‐pyrolysis bio‐oil: Ash deposition and gaseous emissions
Fast pyrolysis is a promising method to transform solid biomass into a liquid product called “bio‐oil” with an energy density of four to five times greater than the feedstock. The process involves rapidly heating biomass to 450–600°C in the absence of air and condensing the vapor produced to give bio‐oil. Typically, 50–75% (weight) of the feedstock is converted into bio‐oil that has a number of uses, for example energy production or bio‐refinery feedstock. This study investigated the gaseous emissions and ash deposition characteristics resulting from bio‐oil combustion in a pilot scale combustion test rig at Cranfield University. A feeding system with heated lines and heated/stirred reservoir was used to feed a spray nozzle in the combustion chamber.Ash deposit samples were collected from the resulting flue gas using three air‐cooled probes that simulate heat exchanger tubes with surface temperatures of 500, 600, and 700°C. The deposits formed were analyzed using SEM/EDX and XRD techniques to assess the corrosion potential of the deposits. The results are compared to measured ash deposit compositions formed from biomass combustion. Thermodynamic modeling software was used to make predictions for the partitioning of a range of elements for bio‐oil combustion and the results compared to the measured data. © 2009 American Institute of Chemical Engineers Environ Prog, 2009
- 12 August 2009
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 28 (3) , 397-403
Pilot‐scale combustion of fast‐pyrolysis bio‐oil: Ash deposition and gaseous emissions
Fast pyrolysis is a promising method to transform solid biomass into a liquid product called “bio‐oil” with an energy density of four to five times greater than the feedstock. The process involves rapidly heating biomass to 450–600°C in the absence of air and condensing the vapor produced to give bio‐oil. Typically, 50–75% (weight) of the feedstock is converted into bio‐oil that has a number of uses, for example energy production or bio‐refinery feedstock. This study investigated the gaseous emissions and ash deposition characteristics resulting from bio‐oil combustion in a pilot scale combustion test rig at Cranfield University. A feeding system with heated lines and heated/stirred reservoir was used to feed a spray nozzle in the combustion chamber.Ash deposit samples were collected from the resulting flue gas using three air‐cooled probes that simulate heat exchanger tubes with surface temperatures of 500, 600, and 700°C. The deposits formed were analyzed using SEM/EDX and XRD techniques to assess the corrosion potential of the deposits. The results are compared to measured ash deposit compositions formed from biomass combustion. Thermodynamic modeling software was used to make predictions for the partitioning of a range of elements for bio‐oil combustion and the results compared to the measured data. © 2009 American Institute of Chemical Engineers Environ Prog, 2009