Ying Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ying Shi has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
Jianlin Shi
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
3 shared publicationsJiyang Chen
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
3 shared publicationsQiwei Chen
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
2 shared publications- Liqiong An
College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai 201306, China
1 shared publication
Latest Publications
- 28 April 2006
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 89 (6) , 2038-2042
Fabrication and Photoluminescence Characteristics of Eu 3+ ‐Doped Lu 2 O 3 Transparent Ceramics
A novel co‐precipitation process was adopted for the preparation of highly sinterable europium‐doped lutetia powders using ammonium hydroxide (NH 3 ·H 2 O) and ammonium hydrogen carbonate (NH 4 HCO 3 ) as the mixed precipitant. The resultant powders calcined at 1000°C for 2 h showed good dispersity and excellent sinterability. Highly transparent polycrystalline lutetia ceramics with a relative density of ∼99.9% were fabricated by pressureless sintering in flowing H 2 atmosphere at 1850°C for 6 h without any additives. The average grain sizes of the transparent material were estimated to be 50–60 μm. Optical in‐line transmittance in the visible wavelength region for Lu 2 O 3 ceramics (1 mm in thickness) reached 80%. The luminescence and decay behavior of the obtained transparent plate and the corresponding nanophosphors were also investigated.
- 28 April 2006
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 89 (6) , 2038-2042
Fabrication and Photoluminescence Characteristics of Eu 3+ ‐Doped Lu 2 O 3 Transparent Ceramics
A novel co‐precipitation process was adopted for the preparation of highly sinterable europium‐doped lutetia powders using ammonium hydroxide (NH 3 ·H 2 O) and ammonium hydrogen carbonate (NH 4 HCO 3 ) as the mixed precipitant. The resultant powders calcined at 1000°C for 2 h showed good dispersity and excellent sinterability. Highly transparent polycrystalline lutetia ceramics with a relative density of ∼99.9% were fabricated by pressureless sintering in flowing H 2 atmosphere at 1850°C for 6 h without any additives. The average grain sizes of the transparent material were estimated to be 50–60 μm. Optical in‐line transmittance in the visible wavelength region for Lu 2 O 3 ceramics (1 mm in thickness) reached 80%. The luminescence and decay behavior of the obtained transparent plate and the corresponding nanophosphors were also investigated.
- 1 June 2005
- Published by Springer Nature in Journal of Materials Research
- Vol. 20 (6) , 1409-1414
Photoluminescence of Lu2O3:Eu3+ Phosphors Obtained by Glycine-nitrate Combustion Synthesis
Eu3+-doped Lu2O3 phosphors were synthesized through a novel solution combustion route using glycine as the fuel. The influence of the glycine-to-nitrate (G/N) mole ratio on the crystallite size, specific surface area, morphology, and photoluminescence of the synthesized phosphors was investigated. The ignition temperature on the properties of the products was also studied. With G/N ratio increasing from 1.0 to 1.7, the grain size increased from 35 to 118 nm accordingly, resulting in the obvious changes of the photoluminescence properties. Concentration dependence of the emission intensity revealed that the quenching concentration of europium dopant was around 5 mol% for G/N- 1.7. The intensity of the peak emission due to the 5D0 → 7F2 transition of the Eu3+ ions dropped as the grain size decreased. The charge transfer band position of Eu3+-doped lutetia phosphors shifted toward lower energy (red shift) with the reduction of crystallite sizes and also with the increase of Eu3+ concentrations.
- 1 June 2005
- Published by Springer Nature in Journal of Materials Research
- Vol. 20 (6) , 1409-1414
Photoluminescence of Lu2O3:Eu3+ Phosphors Obtained by Glycine-nitrate Combustion Synthesis
Eu3+-doped Lu2O3 phosphors were synthesized through a novel solution combustion route using glycine as the fuel. The influence of the glycine-to-nitrate (G/N) mole ratio on the crystallite size, specific surface area, morphology, and photoluminescence of the synthesized phosphors was investigated. The ignition temperature on the properties of the products was also studied. With G/N ratio increasing from 1.0 to 1.7, the grain size increased from 35 to 118 nm accordingly, resulting in the obvious changes of the photoluminescence properties. Concentration dependence of the emission intensity revealed that the quenching concentration of europium dopant was around 5 mol% for G/N- 1.7. The intensity of the peak emission due to the 5D0 → 7F2 transition of the Eu3+ ions dropped as the grain size decreased. The charge transfer band position of Eu3+-doped lutetia phosphors shifted toward lower energy (red shift) with the reduction of crystallite sizes and also with the increase of Eu3+ concentrations.
- 1 December 2004
- Published by Springer Nature in Journal of Materials Research
- Vol. 19 (12) , 3586-3591
Synthesis of (Y,Gd)2O3:Eu nanopowder by a novel co-precipitation processing
Nano-sized (Y,Gd)2O3:Eu powders were synthesized by a novel co-precipitation processing in which a mixture of ammonium hydroxide and ammonium hydrogen carbonate was adopted as a complex precipitant. Evolution behaviors of precursors during calcinations were studied by means of thermogravimetry-differential scanning calorimetry-mass spectrum, Fourier transform infrared, x-ray diffraction, scanning electron microscopy, and transmission electron microscopy in detail. Nano-sized (Y,Gd)2O3:Eu powder as prepared possessed a primary grain size of about 30 nm and specific surface area of 38 m2/g after being calcined at 850 °C for 2 h, showing much finer grains and less agglomeration. The as prepared nanopowder shows intense luminescence at 611nm under x-ray or ultraviolet excitation. Transparent (Y,Gd)2O3:Eu ceramics can also be fabricated using this high sinterable nanopowder.
- 1 December 2004
- Published by Springer Nature in Journal of Materials Research
- Vol. 19 (12) , 3586-3591
Synthesis of (Y,Gd)2O3:Eu nanopowder by a novel co-precipitation processing
Nano-sized (Y,Gd)2O3:Eu powders were synthesized by a novel co-precipitation processing in which a mixture of ammonium hydroxide and ammonium hydrogen carbonate was adopted as a complex precipitant. Evolution behaviors of precursors during calcinations were studied by means of thermogravimetry-differential scanning calorimetry-mass spectrum, Fourier transform infrared, x-ray diffraction, scanning electron microscopy, and transmission electron microscopy in detail. Nano-sized (Y,Gd)2O3:Eu powder as prepared possessed a primary grain size of about 30 nm and specific surface area of 38 m2/g after being calcined at 850 °C for 2 h, showing much finer grains and less agglomeration. The as prepared nanopowder shows intense luminescence at 611nm under x-ray or ultraviolet excitation. Transparent (Y,Gd)2O3:Eu ceramics can also be fabricated using this high sinterable nanopowder.