Rajat Kanti Chakraborti
Research Subjects
Rajat Kanti Chakraborti has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
James S. Bays
CH2M, 4350 West Cypress Street, Suite #600, Tampa, FL 33607-4178, USA
2 shared publications- Joseph F. Atkinson
Associate Engineer, CH2M HILL, Inc., 325 East Hillcrest Dr., Suite 125, Thousand Oaks, CA 91360
2 shared publications Lou Balderrama
City of Oxnard, 305 W. Third Street, Oxnard, CA 93030, USA
2 shared publicationsThien Ng
City of Oxnard, 305 W. Third Street, Oxnard, CA 93030, USA
2 shared publicationsJagjit Kaur
CH2M HILL, Inc., 1000 Willshire Blvd, 21st floorLos Angeles, CA 90017, USA
1 shared publication- Jagjit Kaur
CH2M HILL, 1000 Wilshire Boulevard, 21st Floor, Los Angeles, CA 90017, USA
1 shared publication
Latest Publications
- 5 May 2015
- Published by IWA Publishing in Water Science & Technology
- Vol. 72 (2) , 260-268
A pilot study of a subsurface-flow constructed wetland treating membrane concentrate produced from reclaimed water
A pilot study was conducted for 7 months for the City of Oxnard, California, on the use of constructed wetlands to treat concentrate produced by microfiltration and reverse osmosis (RO) of reclaimed wastewater. The treatment performance of a transportable subsurface-flow wetland was investigated by monitoring various forms of nitrogen, orthophosphate, oxygen demand, organic carbon, and selenium. Significant mass removal of constituents was measured under two hydraulic residence times (HRTs) (2.5 and 5 days). Inflow and outflow concentrations of nitrate-N and ammonia-N were significantly different for both HRTs, whereas nitrite-N and total organic carbon (TOC) were significantly different during HRT2. Mass removal by the constructed wetland averaged 61% of nitrate-N, 32% of nitrite-N, 42% of ammonia-N, 43% of biochemical oxygen demand, 19% of orthophosphate as P, 18% of TOC and 61% of selenium. Mass removal exceeded concentration reductions through water volume loss through evapotranspiration. Calibrated first-order area-based removal rates were consistent with literature ranges, and were greater during HRT1 consistent with greater mass loads, higher hydraulic loading and shorter HRTs. The rate constants may provide a basis for sizing a full-scale wetland receiving a similar quality of water. The results indicated that engineered wetlands can be useful in the management of RO membrane concentrate for reclaimed water reuse.
- 5 May 2015
- Published by IWA Publishing in Water Science & Technology
- Vol. 72 (2) , 260-268
A pilot study of a subsurface-flow constructed wetland treating membrane concentrate produced from reclaimed water
A pilot study was conducted for 7 months for the City of Oxnard, California, on the use of constructed wetlands to treat concentrate produced by microfiltration and reverse osmosis (RO) of reclaimed wastewater. The treatment performance of a transportable subsurface-flow wetland was investigated by monitoring various forms of nitrogen, orthophosphate, oxygen demand, organic carbon, and selenium. Significant mass removal of constituents was measured under two hydraulic residence times (HRTs) (2.5 and 5 days). Inflow and outflow concentrations of nitrate-N and ammonia-N were significantly different for both HRTs, whereas nitrite-N and total organic carbon (TOC) were significantly different during HRT2. Mass removal by the constructed wetland averaged 61% of nitrate-N, 32% of nitrite-N, 42% of ammonia-N, 43% of biochemical oxygen demand, 19% of orthophosphate as P, 18% of TOC and 61% of selenium. Mass removal exceeded concentration reductions through water volume loss through evapotranspiration. Calibrated first-order area-based removal rates were consistent with literature ranges, and were greater during HRT1 consistent with greater mass loads, higher hydraulic loading and shorter HRTs. The rate constants may provide a basis for sizing a full-scale wetland receiving a similar quality of water. The results indicated that engineered wetlands can be useful in the management of RO membrane concentrate for reclaimed water reuse.
- 1 January 2011
- Published by Water Environment Federation in Proceedings of the Water Environment Federation
- Vol. 2011 (9) , 6217-6228
Performance of a Pilot Constructed Treatment Wetland For Membrane Concentrate Produced From Reclaimed Water
A pilot study was conducted for the City of Oxnard to assess treatment options for an advanced water purification facility using microfiltration and...
- 1 January 2011
- Published by Water Environment Federation in Proceedings of the Water Environment Federation
- Vol. 2011 (9) , 6217-6228
Performance of a Pilot Constructed Treatment Wetland For Membrane Concentrate Produced From Reclaimed Water
A pilot study was conducted for the City of Oxnard to assess treatment options for an advanced water purification facility using microfiltration and...
- 1 May 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 135 (5) , 306-316
Effect of Mixing on Suspended Particle-Size Distribution
Experiments were performed to evaluate changes in suspended particle-size distribution as a function of variations in mixing conditions. Suspensions were taken from Lake Erie near Buffalo, N.Y., and mixed in a standard jar apparatus using six different mixing intensities. These suspensions were monitored for changes in particle size and shape using a noninvasive image analysis technique. A relationship was derived between suspended particle size and mixing intensity, based on estimates of energy dissipation rates. The regression was also compared with mixing of suspensions taken from two other systems in the Buffalo, N.Y. area, a small lake on the University at Buffalo campus, and the Buffalo River (Buffalo, N.Y.). Samples from all three sites behaved similarly in terms of particle size as a function of mixing conditions. Estimates for dissipation rates in natural systems were then used to relate the laboratory data to field conditions. Dissipation rates produced at slow mixing speeds in the jar were simi...
- 1 May 2009
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 135 (5) , 306-316
Effect of Mixing on Suspended Particle-Size Distribution
Experiments were performed to evaluate changes in suspended particle-size distribution as a function of variations in mixing conditions. Suspensions were taken from Lake Erie near Buffalo, N.Y., and mixed in a standard jar apparatus using six different mixing intensities. These suspensions were monitored for changes in particle size and shape using a noninvasive image analysis technique. A relationship was derived between suspended particle size and mixing intensity, based on estimates of energy dissipation rates. The regression was also compared with mixing of suspensions taken from two other systems in the Buffalo, N.Y. area, a small lake on the University at Buffalo campus, and the Buffalo River (Buffalo, N.Y.). Samples from all three sites behaved similarly in terms of particle size as a function of mixing conditions. Estimates for dissipation rates in natural systems were then used to relate the laboratory data to field conditions. Dissipation rates produced at slow mixing speeds in the jar were simi...
- 1 February 2007
- Published by IWA Publishing in Journal of Water Supply: Research and Technology—AQUA
- Vol. 56 (1) , 1-11
In situ analysis of flocs
- 1 February 2007
- Published by IWA Publishing in Journal of Water Supply: Research and Technology—AQUA
- Vol. 56 (1) , 1-11
In situ analysis of flocs
- 1 November 2006
- Published by IWA Publishing in Journal of Water Supply: Research and Technology—AQUA
- Vol. 55 (7-8) , 439-451
Dependence of perceived aggregate size on pixel resolution using an imaging method
In order to assess the experimental artefacts associated with image-based characterization of aggregates, tests were performed to evaluate the effects of aggregate size and shape, relative to the pixel resolution of the imaging device. The basic motivation for the study was to further the understanding of particle separation processes in water treatment and specific goals were to: (1) analyse flocs developed from coagulation and flocculation processes using a non-intrusive measurement technique; and (2) develop relationships between measured aggregate characteristics and accuracy in an imaging method. The main objective of this study was to investigate the dependence of perceived aggregate size on pixel resolution using an imaging method. Analysis of fractal dimensions as a means of quantifying aggregate shape and other geometric properties was used to illustrate the consequences of potential measurement errors that might be generated, based on a given pixel resolution. A variety of pixel resolutions might be realized in an experimental setting by using different camera lenses and magnifications, and this variety is related to the desired degree of measurement accuracy. A relationship between the expected measurement error and the particle properties is established as a function of pixel resolution for both a single spherical particle and a cluster of three spheres. Results of this study provide an estimate to quantify the error in measurements due to pixel resolution obtained from an imaging method depending on the size of the aggregates of interest, and to assess the appropriateness of a particular pixel resolution depending on the desired degree of accuracy for a given analysis.
- 1 November 2006
- Published by IWA Publishing in Journal of Water Supply: Research and Technology—AQUA
- Vol. 55 (7-8) , 439-451
Dependence of perceived aggregate size on pixel resolution using an imaging method
In order to assess the experimental artefacts associated with image-based characterization of aggregates, tests were performed to evaluate the effects of aggregate size and shape, relative to the pixel resolution of the imaging device. The basic motivation for the study was to further the understanding of particle separation processes in water treatment and specific goals were to: (1) analyse flocs developed from coagulation and flocculation processes using a non-intrusive measurement technique; and (2) develop relationships between measured aggregate characteristics and accuracy in an imaging method. The main objective of this study was to investigate the dependence of perceived aggregate size on pixel resolution using an imaging method. Analysis of fractal dimensions as a means of quantifying aggregate shape and other geometric properties was used to illustrate the consequences of potential measurement errors that might be generated, based on a given pixel resolution. A variety of pixel resolutions might be realized in an experimental setting by using different camera lenses and magnifications, and this variety is related to the desired degree of measurement accuracy. A relationship between the expected measurement error and the particle properties is established as a function of pixel resolution for both a single spherical particle and a cluster of three spheres. Results of this study provide an estimate to quantify the error in measurements due to pixel resolution obtained from an imaging method depending on the size of the aggregates of interest, and to assess the appropriateness of a particular pixel resolution depending on the desired degree of accuracy for a given analysis.